支持stl容器的gdb自定义命令

# 本文可以从https://sourceware.org/ml/gdb/2008-02/msg00064/stl-views.gdb直接下载

# 有关gdb的高级使用，请浏览：http://blog.csdn.net/Aquester/article/details/7780721

#

# 使用方法：

# 将以下内容追加到~/.gdbinit文件的尾部，然后再启动gdb，如果gdb已经启动，则可以source ~/.gdbinit来立即生效。

##########################################

#                                        #

#   STL GDB evaluators/views/utilities   #

#                                        #

##########################################

#

#   The new GDB commands:                                                         

#    are entirely non instrumental                                             

#    do not depend on any "inline"(s) - e.g. size(), [], etc

#       are extremely tolerant to debugger settings

#                                                                                 

#   This file should be "included" in .gdbinit as following:

#   source stl-views.gdb or just paste it into your .gdbinit file

#

#   The following STL containers are currently supported:

#

#       std::vector<T> -- via pvector command

#       std::list<T> -- via plist command

#       std::map<T,T> -- via pmap command

#       std::multimap<T,T> -- via pmap command

#       std::set<T> -- via pset command

#       std::multiset<T> -- via pset command

#       std::deque<T> -- via pdequeue command

#       std::stack<T> -- via pstack command

#       std::queue<T> -- via pqueue command

#       std::priority_queue<T> -- via ppqueue command

#       std::bitset<n> -- via pbitset command

#       std::string -- via pstring command

#       std::widestring -- via pwstring command

#

#   The end of this file contains (optional) C++ beautifiers

#

##########################################################################

#                                                                        #

# CopyLefty @ 2008 - Dan C Marinescu - No Rights Reserved / GPL V3.      #

# Inspired by intial work of Tom Malnar and many others                 #

#  (do whatever you want with this code, hope it helps)                 #

#   Email: dan_c_marinescu@yahoo.com                                     #

#                                                                        #

##########################################################################

#

# std::vector<>

#

define pvector
if $argc == 0
help pvector
else
set $size = $arg0._M_impl._M_finish - $arg0._M_impl._M_start
set $capacity = $arg0._M_impl._M_end_of_storage - $arg0._M_impl._M_start
set $size_max = $size - 1
end
if $argc == 1
set $i = 0
while $i < $size
printf "elem[%u]: ", $i
p *($arg0._M_impl._M_start + $i)
set $i++
end
end
if $argc == 2
set $idx = $arg1
if $idx < 0 || $idx > $size_max
printf "idx1, idx2 are not in acceptable range: [0..%u].\n", $size_max
else
printf "elem[%u]: ", $idx
p *($arg0._M_impl._M_start + $idx)
end
end
if $argc == 3
 set $start_idx = $arg1
 set $stop_idx = $arg2
 if $start_idx > $stop_idx
   set $tmp_idx = $start_idx
   set $start_idx = $stop_idx
   set $stop_idx = $tmp_idx
 end
 if $start_idx < 0 || $stop_idx < 0 || $start_idx > $size_max || $stop_idx > $size_max
   printf "idx1, idx2 are not in acceptable range: [0..%u].\n", $size_max
 else
   set $i = $start_idx
while $i <= $stop_idx
printf "elem[%u]: ", $i
p *($arg0._M_impl._M_start + $i)
set $i++
end
 end
end
if $argc > 0
printf "Vector size = %u\n", $size
printf "Vector capacity = %u\n", $capacity
printf "Element "
whatis $arg0._M_impl._M_start
end

end

document pvector
Prints std::vector<T> information.
Syntax: pvector <vector> <idx1> <idx2>
Note: idx, idx1 and idx2 must be in acceptable range [0..<vector>.size()-1].
Examples:
pvector v - Prints vector content, size, capacity and T typedef
pvector v 0 - Prints element[idx] from vector
pvector v 1 2 - Prints elements in range [idx1..idx2] from vector

end 

#

# std::list<>

#

define plist
if $argc == 0
help plist
else
set $head = &$arg0._M_impl._M_node
set $current = $arg0->_M_impl->_M_node->_M_next
set $size = 0
while $current != $head
if $argc == 2
printf "elem[%u]: ", $size
p *($arg1*)($current + 1)
end
if $argc == 3
if $size == $arg2
printf "elem[%u]: ", $size
p *($arg1*)($current + 1)
end
end
set $current = $current->_M_next
set $size++
end
printf "List size = %u \n", $size
if $argc == 1
printf "List "
whatis $arg0
printf "Use plist <variable_name> <element_type> to see the elements in the list.\n"
end
end

end

document plist
Prints std::list<T> information.
Syntax: plist <list> <T> <idx>: Prints list size, if T defined all elements or just element at idx
Examples:
plist l - prints list size and definition
plist l int - prints all elements and list size
plist l int 2 - prints the third element in the list (if exists) and list size

end

#

# std::map and std::multimap

#

define pmap
if $argc == 0
help pmap
else
set $tree = $arg0
set $i = 0
set $node = $tree->_M_t->_M_impl->_M_header->_M_left
set $end = $tree->_M_t->_M_impl->_M_header
set $tree_size = $tree->_M_t->_M_impl->_M_node_count
if $argc == 1
printf "Map "
whatis $tree
printf "Use pmap <variable_name> <left_element_type> <right_element_type> to see the elements in the map.\n"
end
if $argc == 3
while $i < $tree_size
set $value = (void *)($node + 1)
printf "elem[%u]->left: ", $i
p *($arg1*)$value
set $value = $value + 4
printf "elem[%u]->right: ", $i
p *($arg2*)$value
if $node->_M_right != 0
set $node = $node->_M_right
while $node->_M_left != 0
set $node = $node->_M_left
end
else
set $tmp_node = $node->_M_parent
while $node == $tmp_node->_M_right
set $node = $tmp_node
set $tmp_node = $tmp_node->_M_parent
end
if $node->_M_right != $tmp_node
set $node = $tmp_node
end
end
set $i++
end
end
if $argc == 4
set $idx = $arg3
set $ElementsFound = 0
while $i < $tree_size
set $value = (void *)($node + 1)
if *($arg1*)$value == $idx
printf "elem[%u]->left: ", $i
p *($arg1*)$value
set $value = $value + 4
printf "elem[%u]->right: ", $i
p *($arg2*)$value
set $ElementsFound++
end
if $node->_M_right != 0
set $node = $node->_M_right
while $node->_M_left != 0
set $node = $node->_M_left
end
else
set $tmp_node = $node->_M_parent
while $node == $tmp_node->_M_right
set $node = $tmp_node
set $tmp_node = $tmp_node->_M_parent
end
if $node->_M_right != $tmp_node
set $node = $tmp_node
end
end
set $i++
end
printf "Number of elements found = %u\n", $ElementsFound
end
if $argc == 5
set $idx1 = $arg3
set $idx2 = $arg4
set $ElementsFound = 0
while $i < $tree_size
set $value = (void *)($node + 1)
set $valueLeft = *($arg1*)$value
set $valueRight = *($arg2*)($value + 4)
if $valueLeft == $idx1 && $valueRight == $idx2
printf "elem[%u]->left: ", $i
p $valueLeft
printf "elem[%u]->right: ", $i
p $valueRight
set $ElementsFound++
end
if $node->_M_right != 0
set $node = $node->_M_right
while $node->_M_left != 0
set $node = $node->_M_left
end
else
set $tmp_node = $node->_M_parent
while $node == $tmp_node->_M_right
set $node = $tmp_node
set $tmp_node = $tmp_node->_M_parent
end
if $node->_M_right != $tmp_node
set $node = $tmp_node
end
end
set $i++
end
printf "Number of elements found = %u\n", $ElementsFound
end
printf "Map size = %u\n", $tree_size
end

end

document pmap
Prints std::map<TLeft and TRight> or std::multimap<TLeft and TRight> information. Works for std::multimap as well.
Syntax: pmap <map> <TtypeLeft> <TypeRight> <valLeft> <valRight>: Prints map size, if T defined all elements or just element(s) with val(s)
Examples:
pmap m - prints map size and definition
pmap m int int - prints all elements and map size
pmap m int int 20 - prints the element(s) with left-value = 20 (if any) and map size
pmap m int int 20 200 - prints the element(s) with left-value = 20 and right-value = 200 (if any) and map size

end

#

# std::set and std::multiset

#

define pset
if $argc == 0
help pset
else
set $tree = $arg0
set $i = 0
set $node = $tree->_M_t->_M_impl->_M_header->_M_left
set $end = $tree->_M_t->_M_impl->_M_header
set $tree_size = $tree->_M_t->_M_impl->_M_node_count
if $argc == 1
printf "Set "
whatis $tree
printf "Use pset <variable_name> <element_type> to see the elements in the set.\n"
end
if $argc == 2
while $i < $tree_size
set $value = (void *)($node + 1)
printf "elem[%u]: ", $i
p *($arg1*)$value
if $node->_M_right != 0
set $node = $node->_M_right
while $node->_M_left != 0
set $node = $node->_M_left
end
else
set $tmp_node = $node->_M_parent
while $node == $tmp_node->_M_right
set $node = $tmp_node
set $tmp_node = $tmp_node->_M_parent
end
if $node->_M_right != $tmp_node
set $node = $tmp_node
end
end
set $i++
end
end
if $argc == 3
set $idx = $arg2
set $ElementsFound = 0
while $i < $tree_size
set $value = (void *)($node + 1)
if *($arg1*)$value == $idx
printf "elem[%u]: ", $i
p *($arg1*)$value
set $ElementsFound++
end
if $node->_M_right != 0
set $node = $node->_M_right
while $node->_M_left != 0
set $node = $node->_M_left
end
else
set $tmp_node = $node->_M_parent
while $node == $tmp_node->_M_right
set $node = $tmp_node
set $tmp_node = $tmp_node->_M_parent
end
if $node->_M_right != $tmp_node
set $node = $tmp_node
end
end
set $i++
end
printf "Number of elements found = %u\n", $ElementsFound
end
printf "Set size = %u\n", $tree_size
end

end

document pset
Prints std::set<T> or std::multiset<T> information. Works for std::multiset as well.
Syntax: pset <set> <T> <val>: Prints set size, if T defined all elements or just element(s) having val
Examples:
pset s - prints set size and definition
pset s int - prints all elements and the size of s
pset s int 20 - prints the element(s) with value = 20 (if any) and the size of s

end

#

# std::dequeue

#

define pdequeue
if $argc == 0
help pdequeue
else
set $size = 0
set $start_cur = $arg0._M_impl._M_start._M_cur
set $start_last = $arg0._M_impl._M_start._M_last
set $start_stop = $start_last
while $start_cur != $start_stop
p *$start_cur
set $start_cur++
set $size++
end
set $finish_first = $arg0._M_impl._M_finish._M_first
set $finish_cur = $arg0._M_impl._M_finish._M_cur
set $finish_last = $arg0._M_impl._M_finish._M_last
if $finish_cur < $finish_last
set $finish_stop = $finish_cur
else
set $finish_stop = $finish_last
end
while $finish_first != $finish_stop
p *$finish_first
set $finish_first++
set $size++
end
printf "Dequeue size = %u\n", $size
end

end

document pdequeue
Prints std::dequeue<T> information.
Syntax: pdequeue <dequeue>: Prints dequeue size, if T defined all elements
Deque elements are listed "left to right" (left-most stands for front and right-most stands for back)
Example:
pdequeue d - prints all elements and size of d

end

#

# std::stack

#

define pstack
if $argc == 0
help pstack
else
set $start_cur = $arg0.c._M_impl._M_start._M_cur
set $finish_cur = $arg0.c._M_impl._M_finish._M_cur
set $size = $finish_cur - $start_cur

        set $i = $size - 1

        while $i >= 0

            p *($start_cur + $i)

            set $i--

        end
printf "Stack size = %u\n", $size
end

end

document pstack
Prints std::stack<T> information.
Syntax: pstack <stack>: Prints all elements and size of the stack
Stack elements are listed "top to buttom" (top-most element is the first to come on pop)
Example:
pstack s - prints all elements and the size of s

end

#

# std::queue

#

define pqueue
if $argc == 0
help pqueue
else
set $start_cur = $arg0.c._M_impl._M_start._M_cur
set $finish_cur = $arg0.c._M_impl._M_finish._M_cur
set $size = $finish_cur - $start_cur

        set $i = 0

        while $i < $size

            p *($start_cur + $i)

            set $i++

        end
printf "Queue size = %u\n", $size
end

end

document pqueue
Prints std::queue<T> information.
Syntax: pqueue <queue>: Prints all elements and the size of the queue
Queue elements are listed "top to bottom" (top-most element is the first to come on pop)
Example:
pqueue q - prints all elements and the size of q

end

#

# std::priority_queue

#

define ppqueue
if $argc == 0
help ppqueue
else
set $size = $arg0.c._M_impl._M_finish - $arg0.c._M_impl._M_start
set $capacity = $arg0.c._M_impl._M_end_of_storage - $arg0.c._M_impl._M_start
set $i = $size - 1
while $i >= 0
p *($arg0.c._M_impl._M_start + $i)
set $i--
end
printf "Priority queue size = %u\n", $size
printf "Priority queue capacity = %u\n", $capacity
end

end

document ppqueue
Prints std::priority_queue<T> information.
Syntax: ppqueue <priority_queue>: Prints all elements, size and capacity of the priority_queue
Priority_queue elements are listed "top to buttom" (top-most element is the first to come on pop)
Example:
ppqueue pq - prints all elements, size and capacity of pq

end

#

# std::bitset

#

define pbitset
if $argc == 0
help pbitset
else

        p /t $arg0._M_w
end

end

document pbitset
Prints std::bitset<n> information.
Syntax: pbitset <bitset>: Prints all bits in bitset
Example:
pbitset b - prints all bits in b

end

#

# std::string

#

define pstring
if $argc == 0
help pstring
else
printf "String \t\t\t= \"%s\"\n", $arg0._M_data()
printf "String size/length \t= %u\n", $arg0._M_rep()->_M_length
printf "String capacity \t= %u\n", $arg0._M_rep()->_M_capacity
printf "String ref-count \t= %d\n", $arg0._M_rep()->_M_refcount
end

end

document pstring
Prints std::string information.
Syntax: pstring <string>
Example:
pstring s - Prints content, size/length, capacity and ref-count of string s

end 

#

# std::wstring

#

define pwstring
if $argc == 0
help pwstring
else
call printf("WString \t\t= \"%ls\"\n", $arg0._M_data())
printf "WString size/length \t= %u\n", $arg0._M_rep()->_M_length
printf "WString capacity \t= %u\n", $arg0._M_rep()->_M_capacity
printf "WString ref-count \t= %d\n", $arg0._M_rep()->_M_refcount
end

end

document pwstring
Prints std::wstring information.
Syntax: pwstring <wstring>
Example:
pwstring s - Prints content, size/length, capacity and ref-count of wstring s

end 

#

# C++ related beautifiers

#

set print pretty on

set print object on

set print static-members on

set print vtbl on

set print demangle on

set demangle-style gnu-v3

set print sevenbit-strings off