一、文件位置

/usr/include/sys/_termios.h

二、文件内容

/*-
* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (c) 1988, 1989, 1993, 1994
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)termios.h 8.3 (Berkeley) 3/28/94
* $FreeBSD: releng/12.0/sys/sys/_termios.h 326023 2017-11-20 19:43:44Z pfg $
*/ #ifndef _SYS__TERMIOS_H_
#define _SYS__TERMIOS_H_ /*
* Special Control Characters
*
* Index into c_cc[] character array.
*
* Name Subscript Enabled by
*/
#define VEOF 0 /* ICANON */
#define VEOL 1 /* ICANON */
#if __BSD_VISIBLE
#define VEOL2 2 /* ICANON together with IEXTEN */
#endif
#define VERASE 3 /* ICANON */
#if __BSD_VISIBLE
#define VWERASE 4 /* ICANON together with IEXTEN */
#endif
#define VKILL 5 /* ICANON */
#if __BSD_VISIBLE
#define VREPRINT 6 /* ICANON together with IEXTEN */
#define VERASE2 7 /* ICANON */
#endif
/* 7 ex-spare 1 */
#define VINTR 8 /* ISIG */
#define VQUIT 9 /* ISIG */
#define VSUSP 10 /* ISIG */
#if __BSD_VISIBLE
#define VDSUSP 11 /* ISIG together with IEXTEN */
#endif
#define VSTART 12 /* IXON, IXOFF */
#define VSTOP 13 /* IXON, IXOFF */
#if __BSD_VISIBLE
#define VLNEXT 14 /* IEXTEN */
#define VDISCARD 15 /* IEXTEN */
#endif
#define VMIN 16 /* !ICANON */
#define VTIME 17 /* !ICANON */
#if __BSD_VISIBLE
#define VSTATUS 18 /* ICANON together with IEXTEN */
/* 19 spare 2 */
#endif
#define NCCS 20 #define _POSIX_VDISABLE 0xff /*
* Input flags - software input processing
*/
#define IGNBRK 0x00000001 /* ignore BREAK condition */
#define BRKINT 0x00000002 /* map BREAK to SIGINTR */
#define IGNPAR 0x00000004 /* ignore (discard) parity errors */
#define PARMRK 0x00000008 /* mark parity and framing errors */
#define INPCK 0x00000010 /* enable checking of parity errors */
#define ISTRIP 0x00000020 /* strip 8th bit off chars */
#define INLCR 0x00000040 /* map NL into CR */
#define IGNCR 0x00000080 /* ignore CR */
#define ICRNL 0x00000100 /* map CR to NL (ala CRMOD) */
#define IXON 0x00000200 /* enable output flow control */
#define IXOFF 0x00000400 /* enable input flow control */
#if __XSI_VISIBLE || __POSIX_VISIBLE >= 200809
#define IXANY 0x00000800 /* any char will restart after stop */
#endif
#if __BSD_VISIBLE
#define IMAXBEL 0x00002000 /* ring bell on input queue full */
#endif /*
* Output flags - software output processing
*/
#define OPOST 0x00000001 /* enable following output processing */
#if __XSI_VISIBLE
#define ONLCR 0x00000002 /* map NL to CR-NL (ala CRMOD) */
#endif
#if __BSD_VISIBLE
#define TABDLY 0x00000004 /* tab delay mask */
#define TAB0 0x00000000 /* no tab delay and expansion */
#define TAB3 0x00000004 /* expand tabs to spaces */
#define ONOEOT 0x00000008 /* discard EOT's (^D) on output) */
#endif
#if __XSI_VISIBLE
#define OCRNL 0x00000010 /* map CR to NL on output */
#define ONOCR 0x00000020 /* no CR output at column 0 */
#define ONLRET 0x00000040 /* NL performs CR function */
#endif /*
* Control flags - hardware control of terminal
*/
#if __BSD_VISIBLE
#define CIGNORE 0x00000001 /* ignore control flags */
#endif
#define CSIZE 0x00000300 /* character size mask */
#define CS5 0x00000000 /* 5 bits (pseudo) */
#define CS6 0x00000100 /* 6 bits */
#define CS7 0x00000200 /* 7 bits */
#define CS8 0x00000300 /* 8 bits */
#define CSTOPB 0x00000400 /* send 2 stop bits */
#define CREAD 0x00000800 /* enable receiver */
#define PARENB 0x00001000 /* parity enable */
#define PARODD 0x00002000 /* odd parity, else even */
#define HUPCL 0x00004000 /* hang up on last close */
#define CLOCAL 0x00008000 /* ignore modem status lines */
#if __BSD_VISIBLE
#define CCTS_OFLOW 0x00010000 /* CTS flow control of output */
#define CRTSCTS (CCTS_OFLOW | CRTS_IFLOW)
#define CRTS_IFLOW 0x00020000 /* RTS flow control of input */
#define CDTR_IFLOW 0x00040000 /* DTR flow control of input */
#define CDSR_OFLOW 0x00080000 /* DSR flow control of output */
#define CCAR_OFLOW 0x00100000 /* DCD flow control of output */
#endif /*
* "Local" flags - dumping ground for other state
*
* Warning: some flags in this structure begin with
* the letter "I" and look like they belong in the
* input flag.
*/ #if __BSD_VISIBLE
#define ECHOKE 0x00000001 /* visual erase for line kill */
#endif
#define ECHOE 0x00000002 /* visually erase chars */
#define ECHOK 0x00000004 /* echo NL after line kill */
#define ECHO 0x00000008 /* enable echoing */
#define ECHONL 0x00000010 /* echo NL even if ECHO is off */
#if __BSD_VISIBLE
#define ECHOPRT 0x00000020 /* visual erase mode for hardcopy */
#define ECHOCTL 0x00000040 /* echo control chars as ^(Char) */
#endif
#define ISIG 0x00000080 /* enable signals INTR, QUIT, [D]SUSP */
#define ICANON 0x00000100 /* canonicalize input lines */
#if __BSD_VISIBLE
#define ALTWERASE 0x00000200 /* use alternate WERASE algorithm */
#endif
#define IEXTEN 0x00000400 /* enable DISCARD and LNEXT */
#define EXTPROC 0x00000800 /* external processing */
#define TOSTOP 0x00400000 /* stop background jobs from output */
#if __BSD_VISIBLE
#define FLUSHO 0x00800000 /* output being flushed (state) */
#define NOKERNINFO 0x02000000 /* no kernel output from VSTATUS */
#define PENDIN 0x20000000 /* XXX retype pending input (state) */
#endif
#define NOFLSH 0x80000000 /* don't flush after interrupt */ /*
* Standard speeds
*/
#define B0 0
#define B50 50
#define B75 75
#define B110 110
#define B134 134
#define B150 150
#define B200 200
#define B300 300
#define B600 600
#define B1200 1200
#define B1800 1800
#define B2400 2400
#define B4800 4800
#define B9600 9600
#define B19200 19200
#define B38400 38400
#if __BSD_VISIBLE
#define B7200 7200
#define B14400 14400
#define B28800 28800
#define B57600 57600
#define B76800 76800
#define B115200 115200
#define B230400 230400
#define B460800 460800
#define B921600 921600
#define EXTA 19200
#define EXTB 38400
#endif typedef unsigned int tcflag_t;
typedef unsigned char cc_t;
typedef unsigned int speed_t; struct termios {
tcflag_t c_iflag; /* input flags */
tcflag_t c_oflag; /* output flags */
tcflag_t c_cflag; /* control flags */
tcflag_t c_lflag; /* local flags */
cc_t c_cc[NCCS]; /* control chars */
speed_t c_ispeed; /* input speed */
speed_t c_ospeed; /* output speed */
}; #endif /* !_SYS__TERMIOS_H_ */

termios结构体各成员的值(FreeBSD 12.0)的更多相关文章

  1. Linux串口通信之termios结构体说明

    termios结构体中,该结构体一般包括如下的成员:tcflag_t c_iflag;      tcflag_t c_oflag;      tcflag_t c_cflag;      tcfla ...

  2. Swift超详细的基础语法-结构体,结构体构造器,定义成员方法, 值类型, 扩充函数

    知识点 基本概念 结构体的基本使用 结构体构造器(构造函数/构造方法) 结构体扩充函数(方法), 又称成员方法 结构体是值类型 1. 基本概念 1.1 概念介绍 结构体(struct)是由一系列具有相 ...

  3. FreeBSD 12.0 版发布

    FreeBSD 是一个自由且开源的类 Unix 操作系统,是 BSD Unix 的直系继承者.起始于 1993 年,FreeBSD 拥有悠久的历史与诸多衍生版本.其饱经考验,是最广泛应用的开源 BSD ...

  4. struct termios结构体【转】

    本文转载自:http://blog.csdn.net/vevenlcf/article/details/51096122 一.数据成员 termios 函数族提供了一个常规的终端接口,用于控制非同步通 ...

  5. termios结构体的内容

    一.结构体成员 struct termios { tcflag_t c_iflag; tcflag_t c_oflag; tcflag_t c_cflag; tcflag_t c_lflag; cc_ ...

  6. Linux串口—struct termios结构体【转】

    转自:https://blog.csdn.net/yemingzhu163/article/details/5897156 一.数据成员 termios 函数族提供了一个常规的终端接口,用于控制非同步 ...

  7. struct termios结构体详解

    一.数据成员 termios 函数族提供了一个常规的终端接口,用于控制非同步通信端口. 这个结构包含了至少下列成员:tcflag_t c_iflag;      /* 输入模式 */tcflag_t ...

  8. 结构体访问成员变量什么时候该用“->”或者是"."呢?的困惑

    煎蛋栗子: typedef struct Node{int data;struct Node *next;}LinkList; LinkList *p=(LinkList *)malloc(sizeo ...

  9. go语言基础之结构体做函数参数 值传递和地址传递

    1.结构体做函数参数值传递 示例: package main //必须有个main包 import "fmt" //定义一个结构体类型 type Student struct { ...

随机推荐

  1. jmeter4.0测试dubbo接口遇到的问题:An error occurred: org.springframework.scheduling.quartz.CronTriggerBean has interface org.quartz.CronTrigger as super class

    半年前,用jmeter4.0测试dubbo接口的时候,遇到这样一个问题 An error occurred: org.springframework.scheduling.quartz.CronTri ...

  2. print

    说一说这个print函数,我们经常使用,但有一些细节却往往错过了 print print()输出会换行是因为默认end="\n" 想要不换行,且覆盖 print("\r第 ...

  3. ftp 两台服务器传输文件 apache

    import java.io.File;import java.io.FileInputStream;import java.io.IOException;import java.io.OutputS ...

  4. 【洛谷P3901】数列找不同

    题目大意:给定一个长度为 N 的序列,每个点被染了一个颜色.现有 M 个询问,每个询问查询区间 [l,r] 内的点是否颜色都是不同的. 题解:莫队裸题. 直接维护区间颜色数,用 cnt[] 记录下区间 ...

  5. 真机控件获取 app-inspector

    1.安装app-inspector:npm  install  app-inspector  -g 若是要卸载原有的:npm   uninstall   app-inspector   -g   np ...

  6. 关于MySQL锁的详解

    有2种 1.表锁 2.行锁 支持 .innodb支持行锁,表级锁 .myisam只支持表级锁 innodb实现了下面2种标准的行级锁 .共享锁 S LOCK 允许事务读一行数据 .排他锁 X LOCK ...

  7. pyinstall实现不显示控制窗口

    做图形界面的时候,总会弹出一个cmd的黑框框,为了美观,通常希望将其隐藏. 查找资料得知:1.pythonw.exe .py不会出现(此方法没试过) 2.python.exe .pyw即将py文件的后 ...

  8. hdu 2973"YAPTCHA"(威尔逊定理)

    传送门 题意: 给出自然数 n,计算出 Sn 的值,其中 [ x ]表示不大于 x 的最大整数. 题解: 根据威尔逊定理,如果 p 为素数,那么 (p-1)! ≡ -1(mod p),即 (p-1)! ...

  9. 洛谷 P2622 关灯问题II(状压DP入门题)

    传送门 https://www.cnblogs.com/violet-acmer/p/9852294.html 题解: 相关变量解释: int n,m; ];//a[i][j] : 第i个开关对第j个 ...

  10. javascript(基础)_对数组的遍历方法总结(find, findIndex, forEach,)

    一.前言                                                                                                ...