在Linux下,我们精要遇到需要查看系统的硬件信息, 这里我罗列了查看系统硬件信息的实用命令,并做了分类,实例解说。

执行环境:ubuntu 16.04

1. cpu

lscpu命令,查看的是cpu的统计信息.

root@ubuntu:/home/peng/# lscpu
Architecture: x86_64 #cpu架构
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian #小尾序
CPU(s): 1 #总共有1核
On-line CPU(s) list: 0
Thread(s) per core: 1 #每个cpu核,只能支持一个线程,即不支持超线程
Core(s) per socket: 1
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel #cpu产商 intel
CPU family: 6
Model: 158
Model name: Intel(R) Core(TM) i5-7500 CPU @ 3.40GHz
Stepping: 9
CPU MHz: 3408.070
BogoMIPS: 6816.14
Hypervisor vendor: VMware
Virtualization type: full #支持cpu虚拟化技术
L1d cache: 32K
L1i cache: 32K
L2 cache: 256K
L3 cache: 6144K
NUMA node0 CPU(s): 0

查看/proc/cpuinfo,可以知道每个cpu信息,如每个CPU的型号,主频等。

root@ubuntu:/home/peng# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 158
model name : Intel(R) Core(TM) i5-7500 CPU @ 3.40GHz
stepping : 9
microcode : 0x48
cpu MHz : 3408.070
cache size : 6144 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 22
wp : yes
.....

2. 内存

概要查看内存情况

root@ubuntu:/home/peng# free -m
total used free shared buff/cache available
Mem: 1970 702 315 13 952 1025
Swap: 974 20 954

这里的单位是MB,总共的内存是1970MB。

查看内存详细使用

root@ubuntu:/home/peng# cat /proc/meminfo
MemTotal: 2017516 kB
MemFree: 242020 kB
MemAvailable: 1003240 kB
Buffers: 104192 kB
Cached: 699824 kB
SwapCached: 1832 kB
Active: 696320 kB
Inactive: 639924 kB
Active(anon): 236412 kB
Inactive(anon): 301996 kB
Active(file): 459908 kB
Inactive(file): 337928 kB
Unevictable: 48 kB
Mlocked: 48 kB
.....

查看内存硬件信息

root@ubuntu:/home/peng# dmidecode -t memory
# dmidecode 3.0
Getting SMBIOS data from sysfs.
SMBIOS 2.7 present. Handle 0x0084, DMI type 5, 46 bytes
Memory Controller Information
Error Detecting Method: None
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 32768 MB
Maximum Total Memory Size: 491520 MB
Supported Speeds:
70 ns
60 ns
Supported Memory Types:
FPM
EDO
DIMM
SDRAM
Memory Module Voltage: 3.3 V
Associated Memory Slots: 15
.....

内存最大值是 491520 MB。

3. 磁盘

查看硬盘和分区分布

root@ubuntu:/home/peng# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sr0 11:0 1 1024M 0 rom
sda 8:0 0 500G 0 disk
├─sda2 8:2 0 1K 0 part
├─sda5 8:5 0 975M 0 part [SWAP]
└─sda1 8:1 0 499G 0 part /

查看硬盘和分区的详细信息

root@ubuntu:/home/peng# fdisk -l
Disk /dev/sda: 500 GiB, 536870912000 bytes, 1048576000 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x9c674a44 Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 1046575103 1046573056 499G 83 Linux
/dev/sda2 1046577150 1048573951 1996802 975M 5 Extended
/dev/sda5 1046577152 1048573951 1996800 975M 82 Linux swap / Solaris

4. 网卡

查看网卡硬件信息

root@ubuntu:/home/peng# lspci | grep -i 'eth'
02:01.0 Ethernet controller: Intel Corporation 82545EM Gigabit Ethernet Controller (Copper) (rev 01)

查看系统的所有网络接口

root@ubuntu:/home/peng# ifconfig -a
ens33 Link encap:Ethernet HWaddr 00:0c:29:bb:bd:40
inet addr:192.168.0.117 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::76fa:5548:3da0:2ef/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:174629 errors:0 dropped:0 overruns:0 frame:0
TX packets:105285 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:237519396 (237.5 MB) TX bytes:9592767 (9.5 MB) lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:854 errors:0 dropped:0 overruns:0 frame:0
TX packets:854 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:60894 (60.8 KB) TX bytes:60894 (60.8 KB)

或者是

root@ubuntu:/home/peng# ip link show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
link/ether 00:0c:29:bb:bd:40 brd ff:ff:ff:ff:ff:ff

或者

如果要查看某个网络接口的详细信息,例如ens33的详细参数和指标

【有的ubuntu网口是eth0】

root@ubuntu:/home/peng# ethtool ens33
Settings for ens33:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full #支持千兆半双工,全双工模式
1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes #默认使用自适应模式
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Speed: 1000Mb/s #网卡的速度是1000Mb
Duplex: Full #全双工
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
MDI-X: off (auto)
Supports Wake-on: d
Wake-on: d
Current message level: 0x00000007 (7)
drv probe link
Link detected: yes #表示有网线连接,和路由是通的

5. pci

查看pci信息,即主板所有硬件槽信息。

root@ubuntu:/home/peng# lspci
00:00.0 Host bridge: Intel Corporation 82845 845 (Brookdale) Chipset Host Bridge (rev 04)
00:01.0 PCI bridge: Intel Corporation 82845 845 (Brookdale) Chipset AGP Bridge(rev 04)
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #1) (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #2) (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 (rev 02)
00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller:Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02)
00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 420 Go](rev a3)
02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller(rev 46)
02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+(rev 10)
02:04.0 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev 01)
02:04.1 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev 01)

由上述的 输出可以看到,我的电脑上共有3个PCI总线(0号,1号,2号)。在单个系统上,插入多个总线是通过桥(bridge)来完成的,桥是一种用来连接总线 的特殊PCI外设。所以,PCI系统的整体布局组织为树型,我们可以通过上面的lspci输出,来画出我的电脑上的PCI系统的树型结构:

00:00.0(主桥)--00:01.0(PCI桥)-----01:00:0(nVidia显卡)
|
|---00:1d(USB控制器)--00:1d:0(USB1号控制器)
| |
| |--00:1d:1(USB2号控制器) |
|-00:1e:0(PCI桥)--02:00.0(IEEE1394)
| |
| |-02:01.0(8139网卡)
| |
| |-02:04(CardBus桥)-02:04.0(桥1)
| |
| |--02:04.1(桥2)
|
|-00:1f(多功能板卡)-00:1f:0(ISA桥)
|
|--00:1f:1(IDE接口)
|
|--00:1f:3(SMBus)
|
|--00:1f:5(多媒体声音控制器)
|
|--00:1f:6(调制解调器)

由上图可以得出,我的电脑上共有8个PCI设备,其中0号总线上(主桥)上连有4个,1号总线上连有1个,2号总线上连有3个。00:1f是一个连有5个功能的多功能板卡。

如果要更详细的信息:

lspci -v 或者 lspci -vv

如果要看设备树:lscpi -t

root@ubuntu:/home/peng# lspci -t

6. usb

查看usb信息

root@ubuntu:/home/peng# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub
Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

lsusb -t查看系统中的USB拓扑,类似cat /sys/kernel/debug/usb/devices

root@ubuntu:/home/peng# lsusb -t
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 2: Dev 3, If 0, Class=Hub, Driver=hub/7p, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M

/var/lib/usbutils/usb.ids还保存了很多设备商的VID信息

root@ubuntu:/home/peng# cat /var/lib/usbutils/usb.ids | grep King
7778 Counterfeit flash drive [Kingston]
0100 Kingston Flash Drive (128MB)
c010 Kingston FCR-HS2/ATA Card Reader
07cb Kingmax Technology, Inc.
4100 Kingsun SF-620 Infrared Adapter
4959 Kingsun KS-959 Infrared Adapter
0015 Kingston DataTraveler ELITE
0016 Kingston DataTraveler U3
0998 Kingston Data Traveler2.0 Disk Driver
0999 Kingston Data Traveler2.0 Disk Driver
6519 Kingston DataTraveler 2.0 USB Stick
653c Kingston DataTraveler 2.0 Stick (512M)
653d Kingston DataTraveler 2.0 Stick (1GB)
6544 TransMemory-Mini / Kingston DataTraveler 2.0 Stick (2GB)
6545 Kingston DataTraveler 102/2.0 / HEMA Flash Drive 2 GB / PNY Attache 4GB Stick
0951 Kingston Technology
0d8a King Jim Co., Ltd
00a3 Smart King PRO Uninterruptible Power Supply (HID PDC)
0e56 Kingston Technology Company, Inc.
0f8e Kingnet Technology Co., Ltd
13fe Kingston Technology Company Inc.
1f00 Kingston DataTraveler / Patriot Xporter
1687 Kingmax Digital Inc.
16df King Billion Electronics Co., Ltd.
2149 EntropyKing Random Number Generator

lsusb -v查看系统中USB设备的详细信息

lsusb -v

7. lshw查看所有硬件摘要信息

下面命令可以查看所有硬件摘要信息,并输出成一个html文件,把此html文件导出到电脑上,直接打开,可以清楚的看到硬件信息:

lshw -html > /hardware.html

8. lsscsi查看SCSI控制器设备的信息

可以看到SCSI信息和所有虚拟磁盘以及光驱的信息,如果没有硬件SCSI控制器,那就不会返回信息:

root@ubuntu:/home/peng# lsscsi
[2:0:0:0] disk VMware, VMware Virtual S 1.0 /dev/sda
[4:0:0:0] cd/dvd NECVMWar VMware SATA CD01 1.00 /dev/sr0

插入一个U盘后再查看:

root@ubuntu:/home/peng# lsscsi
[2:0:0:0] disk VMware, VMware Virtual S 1.0 /dev/sda
[4:0:0:0] cd/dvd NECVMWar VMware SATA CD01 1.00 /dev/sr0
[33:0:0:0] disk Kingston DataTraveler G2 1.00 /dev/sdb

可以看到U盘为Kingston。

9. 查看bios信息

root@ubuntu:/home/peng# dmidecode -t bios
# dmidecode 3.0
Getting SMBIOS data from sysfs.
SMBIOS 2.7 present. Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Phoenix Technologies LTD
Version: 6.00
Release Date: 07/29/2019
Address: 0xEA480
Runtime Size: 88960 bytes
ROM Size: 64 kB
Characteristics:
ISA is supported
PCI is supported
PC Card (PCMCIA) is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
EDD is supported
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
Smart battery is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
Targeted content distribution is supported
BIOS Revision: 4.6
Firmware Revision: 0.0

dmidecode以一种可读的方式dump出机器的DMI(Desktop Management Interface)信息。这些信息包括了硬件以及BIOS,既可以得到当前的配置,也可以得到系统支持的最大配置,比如说支持的最大内存数等。

如果要查看所有有用信息

dmidecode -q

里面包含了很多硬件信息。

9个Linux 查看系统硬件信息命令(实例详解)的更多相关文章

  1. Linux查看系统硬件信息命令

    Linux查看系统硬件信息命令 查看磁盘类型(是否SSD) cat /sys/block/sda/queue/rotational code:0 SSD盘 code:1 SATA盘 查看物理CPU个数 ...

  2. Linux查看系统硬件信息命令汇总

    对工作中,经常用的查看系统硬件命令的一个简单总结 1.查看磁盘类型(是否SSD盘)cat /sys/block/sda/queue/rotational注意:命令中的sba是你的磁盘名称,可以通过df ...

  3. Linux 查看系统硬件信息(实例详解)

    原文链接:http://www.cnblogs.com/ggjucheng/archive/2013/01/14/2859613.html linux查看系统的硬件信息,并不像windows那么直观, ...

  4. Linux 查看系统硬件信息汇总 (部份实例详解Centoso为例)

    1.cpu #lscpu命令,查看的是cpu的统计信息.(部分旧版本不支持) Disk /dev/sda: bytes heads, sectors/track, cylinders Units = ...

  5. Linux 查看系统硬件信息[转]

    原文:http://www.cnblogs.com/ggjucheng/archive/2013/01/14/2859613.html linux查看系统的硬件信息,并不像windows那么直观,这里 ...

  6. Linux 查看系统硬件信息

    linux查看系统的硬件信息,并不像windows那么直观,这里我罗列了查看系统信息的实用命令,并做了分类,实例解说. cpu lscpu命令,查看的是cpu的统计信息. blue@blue-pc:~ ...

  7. centos 7 查看系统/硬件信息及运维常用命令+联想Y430P无线网卡驱动安装

     centos 7 查看系统/硬件信息及运维常用命令 当前环境:联想Y430P  CentOS 7.3 [root@yan-001 ~] # uname -a # 查看内核/操作系统/CPU信息的Li ...

  8. 利用CMD查看系统硬件信息

    利用CMD查看系统硬件信息对于在windows下查看系统信息大家一定不陌生了,我现在说几个最常用的方法,对命令感兴趣的朋友看看,(给菜鸟看的,老手就不要笑话我了,大家都是从那个时候过来的,^_^).一 ...

  9. Linux(centos)系统各个目录的作用详解

    Linux(centos)系统各个目录的作用详解 文件系统的类型 LINUX有四种基本文件系统类型:普通文件.目录文件.连接文件和特殊文件,可用file命令来识别. 普通文件:如文本文件.C语言元代码 ...

  10. (转)Linux网络状态工具ss命令使用详解

    Linux网络状态工具ss命令使用详解 原文:http://www.landui.com/help/show-5991.html ss 是 socket statistics 的缩写.顾名思义,ss ...

随机推荐

  1. Spring之WebMvcConfigurationSupport

    WebMvcConfigurationSupport是mvc的核心配置.开发spring,了解和掌握这个是必须的. 为了简约篇幅,本文把"WebMvcConfigurationSupport ...

  2. [AGC020D] Min Max Repetition

    牛子题 优先满足第二个条件,长度是 \(\lceil \frac{max(A,B)}{min(A,B)+1}\rceil\) ,那么现在要满足字典序最小,发现先填 \(A..ABA..ABA..AB. ...

  3. Prometheus监控系统(三)Prometheus与Grafana集成

    1. Prometheus和Grafana集成 Grafana是一款采用Go语言编写的开源应用,主要用于大规模指标数据的可视化展现,是网络架构和应用分析中最流行的时序数据展示工具.目前已支持绝大部分常 ...

  4. .NET 个人博客-首页排版优化-2

    个人博客-首页排版优化-2 原本这篇文章早就要出了的,结果之前买的服务器服务商跑路了,导致博客的数据缺失了部分.我是买了一年的服务器,然后用了3个月,国内跑路云太多了,然后也是花钱重新去别的服务商买了 ...

  5. Python中使用MySQL模糊查询的方法

    1.方法一:使用pymysql库的方法 当在Python中使用MySQL进行模糊查询时,我们通常会使用pymysql或mysql-connector-python这样的库来连接MySQL数据库并执行查 ...

  6. 如何优雅地使用Mybatis逆向工程生成类

    文/朱季谦 1.环境:SpringBoot 2.在pom.xml文件里引入相关依赖: 1 <plugin> 2 <groupId>org.mybatis.generator&l ...

  7. 深入解读RabbitMQ工作原理

    RabbitMQ简介 在介绍RabbitMQ之前首先要介绍一下MQ,MQ是什么?MQ全称是Message Queue,可以理解为消息队列的意思. RabbitMQ是一个实现了AMQP(Advanced ...

  8. WRONG(COPY)

    去年总结的列表,欢迎大家补充!! 两个int相乘,50%几率会爆了int.(不开long long见祖宗) 无向图邻接表的边表忘了这是心口永远的痛: 线段树数组开小是4(乘4有时候不够) 调用多个函数 ...

  9. CCF 任务调度

    样例的示意图 查了一圈,然后很烦,不想学习方法,好卡.查了一些题解,发现都是10分,30分先搁置的博客,最后翻到 堪称官方标称的思路 (CCF题目pat题目各大poj/hdoj好戏那个都没有标程,这里 ...

  10. php 开发规范

    ===========================框架========================= · 使用laravel框架,原因:tp的框架路由和orm没有laravel好用 · 使用强 ...