首先搭建mairadb的集群

master 使用端口3306

slave 使用端口3406

master 相关配置

在my.ini 文件的[mysqld] 节点中添加或修改如下配置

#允许其他机器remote 访问

bind-address=0.0.0.0

#开启master bin log

log-bin=mysql-bin

#配置需要进行主从同步的数据库
binlog_do_db=iotplatform

#配置不需要进行主从同步的数据库
binlog_ignore_db=mysql,es,activemqdb
# binary logging format - mixed recommended 默认配置即可
binlog_format=mixed

#这里的id 和slave 必须不一样。修改master 或者slave 均可
server-id = 1

#开启修改即时同步
sync_binlog = 1

slave 相关配置

在my.ini 文件的[mysqld] 节点中添加或修改如下配置

relay_log=relay-bin

port = 3406

注释掉

log-bin=mysql-bin 和 binlog_format=mixed slave 不需要bin log

在[client] 节点修改如下配置

port = 3406

完整master 节点my.ini配置如下

# Example MariaDB config file for large systems.
#
# This is for a large system with memory = 512M where the system runs mainly
# MariaDB.
#
# MariaDB programs look for option files in a set of
# locations which depend on the deployment platform.
# You can copy this option file to one of those
# locations. For information about these locations, do:
# 'my_print_defaults --help' and see what is printed under
# Default options are read from the following files in the given order:
# More information at: http://dev.mysql.com/doc/mysql/en/option-files.html
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option. # The following options will be passed to all MariaDB clients
[client]
#password = your_password
port =
socket = /tmp/mysql.sock # Here follows entries for some specific programs # The MariaDB server
[mysqld]
port =
socket = /tmp/mysql.sock
skip-external-locking
key_buffer_size = 256M
max_allowed_packet = 1M
table_open_cache =
sort_buffer_size = 1M
read_buffer_size = 1M
read_rnd_buffer_size = 4M
myisam_sort_buffer_size = 64M
thread_cache_size =
query_cache_size= 16M
# Try number of CPU's*2 for thread_concurrency
thread_concurrency = bind-address=0.0.0.0 # Point the following paths to different dedicated disks
#tmpdir = /tmp/ # Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
#skip-networking # Replication Master Server (default)
# binary logging is required for replication
log-bin=mysql-bin
binlog_do_db=iotplatform
binlog_ignore_db=mysql,es,activemqdb
# binary logging format - mixed recommended
binlog_format=mixed # required unique id between and ^ -
# defaults to if master-host is not set
# but will not function as a master if omitted
server-id =
sync_binlog =
# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# ) Use the CHANGE MASTER TO command (fully described in our manual) -
# the syntax is:
#
# CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
# MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
# where you replace <host>, <user>, <password> by quoted strings and
# <port> by the master's port number (3306 by default).
#
# Example:
#
# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=,
# MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# ) Set the variables below. However, in case you choose this method, then
# start replication for the first time (even unsuccessfully, for example
# if you mistyped the password in master-password and the slave fails to
# connect), the slave will create a master.info file, and any later
# change in this file to the variables' values below will be ignored and
# overridden by the content of the master.info file, unless you shutdown
# the slave server, delete master.info and restart the slaver server.
# For that reason, you may want to leave the lines below untouched
# (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between and ^ -
# (and different from the master)
# defaults to if master-host is set
# but will not function as a slave if omitted
#server-id =
#
# The replication master for this slave - required
#master-host = <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user = <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password = <password>
#
# The port the master is listening on.
# optional - defaults to
#master-port = <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin # Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = C:\\mysql\\data\\
#innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_group_home_dir = C:\\mysql\\data\\
# You can set .._buffer_pool_size up to - %
# of RAM but beware of setting memory usage too high
#innodb_buffer_pool_size = 256M
#innodb_additional_mem_pool_size = 20M
# Set .._log_file_size to % of buffer pool size
#innodb_log_file_size = 64M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit =
#innodb_lock_wait_timeout = [mysqldump]
quick
max_allowed_packet = 16M [mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates [myisamchk]
key_buffer_size = 128M
sort_buffer_size = 128M
read_buffer = 2M
write_buffer = 2M [mysqlhotcopy]
interactive-timeout

完整的slave 节点my.ini 配置如下

# Example MariaDB config file for large systems.
#
# This is for a large system with memory = 512M where the system runs mainly
# MariaDB.
#
# MariaDB programs look for option files in a set of
# locations which depend on the deployment platform.
# You can copy this option file to one of those
# locations. For information about these locations, do:
# 'my_print_defaults --help' and see what is printed under
# Default options are read from the following files in the given order:
# More information at: http://dev.mysql.com/doc/mysql/en/option-files.html
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option. # The following options will be passed to all MariaDB clients
[client]
#password = your_password
port =
socket = /tmp/mysql.sock # Here follows entries for some specific programs # The MariaDB server
[mysqld]
port =
socket = /tmp/mysql.sock
skip-external-locking
key_buffer_size = 256M
max_allowed_packet = 1M
table_open_cache =
sort_buffer_size = 1M
read_buffer_size = 1M
read_rnd_buffer_size = 4M
myisam_sort_buffer_size = 64M
thread_cache_size =
query_cache_size= 16M
# Try number of CPU's*2 for thread_concurrency
thread_concurrency =
relay_log=relay-bin
# Point the following paths to different dedicated disks
#tmpdir = /tmp/ # Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
#skip-networking # Replication Master Server (default)
# binary logging is required for replication
#log-bin=mysql-bin # binary logging format - mixed recommended
#binlog_format=mixed # required unique id between and ^ -
# defaults to if master-host is not set
# but will not function as a master if omitted
server-id = # Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# ) Use the CHANGE MASTER TO command (fully described in our manual) -
# the syntax is:
#
# CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
# MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
# where you replace <host>, <user>, <password> by quoted strings and
# <port> by the master's port number (3306 by default).
#
# Example:
#
# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=,
# MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# ) Set the variables below. However, in case you choose this method, then
# start replication for the first time (even unsuccessfully, for example
# if you mistyped the password in master-password and the slave fails to
# connect), the slave will create a master.info file, and any later
# change in this file to the variables' values below will be ignored and
# overridden by the content of the master.info file, unless you shutdown
# the slave server, delete master.info and restart the slaver server.
# For that reason, you may want to leave the lines below untouched
# (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between and ^ -
# (and different from the master)
# defaults to if master-host is set
# but will not function as a slave if omitted
#server-id =
#
# The replication master for this slave - required
#master-host = <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user = <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password = <password>
#
# The port the master is listening on.
# optional - defaults to
#master-port = <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin # Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = C:\\mysql\\data\\
#innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_group_home_dir = C:\\mysql\\data\\
# You can set .._buffer_pool_size up to - %
# of RAM but beware of setting memory usage too high
#innodb_buffer_pool_size = 256M
#innodb_additional_mem_pool_size = 20M
# Set .._log_file_size to % of buffer pool size
#innodb_log_file_size = 64M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit =
#innodb_lock_wait_timeout = [mysqldump]
quick
max_allowed_packet = 16M [mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates [myisamchk]
key_buffer_size = 128M
sort_buffer_size = 128M
read_buffer = 2M
write_buffer = 2M [mysqlhotcopy]
interactive-timeout

 

接下来是操作部分

---------------------master 操作部分----------------------------

启动master mysql 并root 登录

备份master 数据库(可以用其他工具代替,例如navicat 或者sqlyog)这期间可以锁住master 数据库不允许写入,如果只是搭建个开发环境,这一步可以省略

锁住master 数据库

FLUSH TABLES WITH READ LOCK;

备份数据库

mysqldump -uroot -p --all-databases > databases.sql

解锁数据库

UNLOCK TABLES;

查看主库状态

SHOW MASTER STATUS;

MariaDB [(none)]> SHOW MASTER STATUS;
+------------------+----------+--------------+------------------+
| File | Position | Binlog_Do_DB | Binlog_Ignore_DB |
+------------------+----------+--------------+------------------+
| mysql-bin.000002 | 326 | | |
+------------------+----------+--------------+------------------+

记下 file 字段与 position 字段的值,配置slave 的时候会用到。

---------------------master 操作部分 end----------------------------

---------------------slave 操作部分---------------------------

启动 slave mysql

将备份出来的sql 导入到slave 节点中(可以用其他工具替代,同上)

mysql -uroot -p < databases.sql

设置主从复制

MariaDB [(none)]> CHANGE MASTER TO MASTER_HOST='localhost',MASTER_USER='root', MASTER_PASSWORD='', MASTER-PORT=3306, MASTER_LOG_FILE='mysql-bin.000002', MASTER_LOG_POS= 326;
Query OK, 0 rows affected (0.24 sec)

开启主从复制

MariaDB [(none)]> START SLAVE;
Query OK, 0 rows affected (0.00 sec)

查看从库状态

SHOW SLAVE STATUS;

结果中Slave_IO_RunningSlave_SQL_Running必须为Yes,如果不是,需要根据提示的错误修改。

测试主从复制是否正常

修改主库的数据,查看从库是否更新。

---------------------slave 操作部分 end ---------------------------

mycat 配置部分

修改shema.xml datahost 部分

    <dataHost name="localhost1" maxCon="1000" minCon="10" balance="0"
writeType="0" dbType="mysql" dbDriver="native">
<heartbeat>select user()</heartbeat>
<!-- can have multi write hosts -->
<writeHost host="hostM1" url="localhost:3306" user="root"
password="123456"> <!-- can have multi read hosts -->
<readHost host="hostS1" url="localhost:3406" user="root" password="123456" ></readHost> </writeHost> <!-- <writeHost host="hostM2" url="localhost:3316" user="root" password="123456"/> -->
</dataHost>

配置完成

在本机搭建mycat 单机环境,使用mariadb 伪集群的更多相关文章

  1. Zookeeper集群搭建(单机多节点,伪集群,docker-compose集群)

    Zookeeper介绍 原理简介 ZooKeeper是一个分布式的.开源的分布式应用程序协调服务.它公开了一组简单的原语,分布式应用程序可以在此基础上实现更高级别的同步.配置维护.组和命名服务.它的设 ...

  2. 在Windows中单机环境下创建RabbitMQ集群

    本文根据:http://www.360doc.com/content/15/0312/17/20874412_454622619.shtml整理而来 RabbitMQ具有很好的消息传递性能,同时又是开 ...

  3. windows单机环境下配置tomcat集群

    场景:我们在平常联系中,需要涉及到tomcat中,但是电脑不够怎么办,肯定是在自己的电脑上模拟集群,就是装多个tomcat,这时候需要稍微配置下.如果是多个服务器,那不用配置,直接怼!!! 这里介绍的 ...

  4. LVS+Keepalived搭建MyCAT高可用負載均衡集群

    1.前面我们已经搭建好mysql主主,并且用mycat实现双写功能,主要配置文件: [root@mycat2 conf]# cat schema.xml <?xml version=" ...

  5. 【ZooKeeper系列】1.ZooKeeper单机版、伪集群和集群环境搭建

    ZooKeeper安装模式主要有3种: 单机版(Standalone模式)模式:仅有一个ZooKeeper服务 伪集群模式:单机多个ZooKeeper服务 集群模式:多机多ZooKeeper服务 1 ...

  6. 分享知识-快乐自己:zookeeper 伪集群搭建

    1):单一 zookeeper  搭建步骤 2):zookeeper 伪集群搭建 1):新建一个集群目录 [root@zoodubbo opt]# mkdir zookeeper_cluster 2) ...

  7. centos7环境下zookeeper的搭建步骤之单机伪集群

    首先说明:这里是单机版的伪集群搭建 第一步:下载zookeeper:zookeeper的下载地址: http://mirror.bit.edu.cn/apache/zookeeper/ 第二步:安装: ...

  8. redis在Windows下以后台服务一键搭建集群(单机--伪集群)

    redis在Windows下以后台服务一键搭建集群(单机--伪集群) 一.概述 此教程介绍如何在windows系统中同一台机器上布置redis伪集群,同时要以后台服务的模式运行.布置以脚本的形式,一键 ...

  9. Zookeeper集群搭建(多节点,单机伪集群,Docker集群)

    Zookeeper介绍 原理简介 ZooKeeper是一个分布式的.开源的分布式应用程序协调服务.它公开了一组简单的原语,分布式应用程序可以在此基础上实现更高级别的同步.配置维护.组和命名服务.它的设 ...

随机推荐

  1. android项目引入三方类库配置文件

    android项目中可能会用到诸多外部的三方库,如**.jar或者引用第三个项目,那么它们引用的这些东西都放在哪里呢?我们来看下. 如果引入的是三方的jar包,我们默认的是放在了libs文件夹下,然后 ...

  2. tRNAscan-SE 预测tRNA基因

    tRNAscan-SE 软件可以根据输入的基因组序列,预测对应的tRNA的基因 在线的tRNAscan-SE的链接如下:http://lowelab.ucsc.edu/tRNAscan-SE/ 如下图 ...

  3. 实现linux服务器之间无密码互访

    最近老是在群里看到许多同学问,linux之间无密码互访怎么弄啊,百度的看得我头晕之类的,所以我就写写怎么样在两台linux服务器之间实现无密码互访,也就是让它们互相信任的意思,废话不多说,直接上菜. ...

  4. Asp.net中文本框全选的实现

    一.鼠标滑过textbox全选 前台: <asp:TextBox runat="server" onMouseOver="this.focus();this.sel ...

  5. 在swift中使用线程休眠

    C#和php都有sleep让线程休眠指定时间后再继续执行后面的代码,swift中应该如何呢?首先,找一下objective-c版本是怎么做的 [self performSelector:@select ...

  6. [转]Linux服务器上11种网络连接状态 和 TCP三次握手/四次挥手详解

    一.Linux服务器上11种网络连接状态: 图:TCP的状态机 通常情况下:一个正常的TCP连接,都会有三个阶段:1.TCP三次握手;2.数据传送;3.TCP四次挥手. 注:以下说明最好能结合”图:T ...

  7. MVC阻止用户注入JavaScript代码或者Html标记

    使用HttpUtility.HtmlEncode("")将字符串进行过滤处理

  8. 对SQL语句进行过滤的函数

    /// <summary> /// 过滤SQL非法字符串 /// </summary> /// <param name="value">< ...

  9. Centos7以上的版本 mysql 无法启动,无法停止问题

    service mysqld start 始终提示如下: Failed to issue method call: Unit mysqld.service failed to load: No suc ...

  10. go jwt OAuth2.0

    https://blog.csdn.net/wangshubo1989/article/details/77980316 https://blog.csdn.net/wangshubo1989/art ...