Python 串口通信操作

下载  pyserial包 https://pypi.python.org/packages/source/p/pyserial/pyserial-2.7.tar.gz#md5=794506184df83ef2290de0d18803dd11

然后解压,例如解压到D:/pyserial.打开cmd，cd 指令切换到D:\pyserial下。执行安装指令 python setup.py install

编写测试代码。

def OpenCom(self,*args):
        #设置端口和波特率
        selComPort =‘com2’
        #波特率
        selBaudRate =9600
       #奇偶校验
        selParity = 'N'
        try:
            if(not self.mySerial):
                self.mySerial = serial.Serial(port=selComPort, baudrate=selBaudRate,bytesize=8,parity=selParity,stopbits=1,timeout=5)
            else:
                if(self.mySerial.isOpen()):
                    self.mySerial.close()
                    self.mySerial = serial.Serial(port=selComPort, baudrate=selBaudRate, bytesize=8, parity=selParity, stopbits=1, timeout=5)
            self.lblInfo['text'] = '打开成功！'
        except Exception as ex:
            self.lblInfo['text'] = '打开失败！'

#使用com口发送modbus协议给终端设备。

def btnEmId_Click(self):

barray = bytearray([0x05, 0x03, 0xA#, 0x54, 0x00, 0x08])

vOldEmId = self.txbOldEmId.get()

vNewEmId = self.txbNewEmId.get()

barray[0] = int(vOldEmId)

barray[5] = int(vNewEmId)

#crc校验

strInput  = utils.crc16_append(barray)

print(barray)

n = self.mySerial.write(barray)

if(n > 0):

str = self.mySerial.readall()

self.lblInfo['text'] = 'success！'

# for s in str:

#     print (hex(s))

else:

　　　　self.lblInfo['text'] = 'error！'