#define EPERM            1      /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Arg list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#define EAGAIN 11 /* Try again */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */
#define EDEADLK 35 /* Resource deadlock would occur */
#define ENAMETOOLONG 36 /* File name too long */
#define ENOLCK 37 /* No record locks available */
#define ENOSYS 38 /* Function not implemented */
#define ENOTEMPTY 39 /* Directory not empty */
#define ELOOP 40 /* Too many symbolic links encountered */
#define EWOULDBLOCK EAGAIN /* Operation would block */
#define ENOMSG 42 /* No message of desired type */
#define EIDRM 43 /* Identifier removed */
#define ECHRNG 44 /* Channel number out of range */
#define EL2NSYNC 45 /* Level 2 not synchronized */
#define EL3HLT 46 /* Level 3 halted */
#define EL3RST 47 /* Level 3 reset */
#define ELNRNG 48 /* Link number out of range */
#define EUNATCH 49 /* Protocol driver not attached */
#define ENOCSI 50 /* No CSI structure available */
#define EL2HLT 51 /* Level 2 halted */
#define EBADE 52 /* Invalid exchange */
#define EBADR 53 /* Invalid request descriptor */
#define EXFULL 54 /* Exchange full */
#define ENOANO 55 /* No anode */
#define EBADRQC 56 /* Invalid request code */
#define EBADSLT 57 /* Invalid slot */ #define EDEADLOCK EDEADLK #define EBFONT 59 /* Bad font file format */
#define ENOSTR 60 /* Device not a stream */
#define ENODATA 61 /* No data available */
#define ETIME 62 /* Timer expired */
#define ENOSR 63 /* Out of streams resources */
#define ENONET 64 /* Machine is not on the network */
#define ENOPKG 65 /* Package not installed */
#define EREMOTE 66 /* Object is remote */
#define ENOLINK 67 /* Link has been severed */
#define EADV 68 /* Advertise error */
#define ESRMNT 69 /* Srmount error */
#define ECOMM 70 /* Communication error on send */
#define EPROTO 71 /* Protocol error */
#define EMULTIHOP 72 /* Multihop attempted */
#define EDOTDOT 73 /* RFS specific error */
#define EBADMSG 74 /* Not a data message */
#define EOVERFLOW 75 /* Value too large for defined data type */
#define ENOTUNIQ 76 /* Name not unique on network */
#define EBADFD 77 /* File descriptor in bad state */
#define EREMCHG 78 /* Remote address changed */
#define ELIBACC 79 /* Can not access a needed shared library */
#define ELIBBAD 80 /* Accessing a corrupted shared library */
#define ELIBSCN 81 /* .lib section in a.out corrupted */
#define ELIBMAX 82 /* Attempting to link in too many shared libraries */
#define ELIBEXEC 83 /* Cannot exec a shared library directly */
#define EILSEQ 84 /* Illegal byte sequence */
#define ERESTART 85 /* Interrupted system call should be restarted */
#define ESTRPIPE 86 /* Streams pipe error */
#define EUSERS 87 /* Too many users */
#define ENOTSOCK 88 /* Socket operation on non-socket */
#define EDESTADDRREQ 89 /* Destination address required */
#define EMSGSIZE 90 /* Message too long */
#define EPROTOTYPE 91 /* Protocol wrong type for socket */
#define ENOPROTOOPT 92 /* Protocol not available */
#define EPROTONOSUPPORT 93 /* Protocol not supported */
#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT 96 /* Protocol family not supported */
#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
#define EADDRINUSE 98 /* Address already in use */
#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
#define ENETDOWN 100 /* Network is down */
#define ENETUNREACH 101 /* Network is unreachable */
#define ENETRESET 102 /* Network dropped connection because of reset */
#define ECONNABORTED 103 /* Software caused connection abort */
#define ECONNRESET 104 /* Connection reset by peer */
#define ENOBUFS 105 /* No buffer space available */
#define EISCONN 106 /* Transport endpoint is already connected */
#define ENOTCONN 107 /* Transport endpoint is not connected */
#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS 109 /* Too many references: cannot splice */
#define ETIMEDOUT 110 /* Connection timed out */
#define ECONNREFUSED 111 /* Connection refused */
#define EHOSTDOWN 112 /* Host is down */
#define EHOSTUNREACH 113 /* No route to host */
#define EALREADY 114 /* Operation already in progress */
#define EINPROGRESS 115 /* Operation now in progress */
#define ESTALE 116 /* Stale NFS file handle */
#define EUCLEAN 117 /* Structure needs cleaning */
#define ENOTNAM 118 /* Not a XENIX named type file */
#define ENAVAIL 119 /* No XENIX semaphores available */
#define EISNAM 120 /* Is a named type file */
#define EREMOTEIO 121 /* Remote I/O error */
#define EDQUOT 122 /* Quota exceeded */ #define ENOMEDIUM 123 /* No medium found */
#define EMEDIUMTYPE 124 /* Wrong medium type */

linux系统错误码大全的更多相关文章

  1. Linux系统错误码对照表

    C Name Value Description EPERM 1 Operation not permitted ENOENT 2 No such file or directory ESRCH 3 ...

  2. linux 常用命令大全

    linux 常用命令大全 系统信息 arch 显示机器的处理器架构(1) uname -m 显示机器的处理器架构(2) uname -r 显示正在使用的内核版本 dmidecode -q 显示硬件系统 ...

  3. Java文件操作源码大全

    Java文件操作源码大全 1.创建文件夹 52.创建文件 53.删除文件 54.删除文件夹 65.删除一个文件下夹所有的文件夹 76.清空文件夹 87.读取文件 88.写入文件 99.写入随机文件 9 ...

  4. Linux常用命令大全(非常全!!!)

    Linux常用命令大全(非常全!!!) 最近都在和Linux打交道,感觉还不错.我觉得Linux相比windows比较麻烦的就是很多东西都要用命令来控制,当然,这也是很多人喜欢linux的原因,比较短 ...

  5. Linux常用命令大全(转)

    (转)Linux常用命令大全(非常全!!!) 最近都在和Linux打交道,感觉还不错.我觉得Linux相比windows比较麻烦的就是很多东西都要用命令来控制,当然,这也是很多人喜欢linux的原因, ...

  6. 18-10-09 Linux常用命令大全(非常全!!!)

     Linux常用命令大全(非常全!!!)   Linux常用命令大全(非常全!!!) 最近都在和Linux打交道,感觉还不错.我觉得Linux相比windows比较麻烦的就是很多东西都要用命令来控制, ...

  7. [转] Linux常用命令大全(非常全!!!)

    出处:https://www.cnblogs.com/yjd_hycf_space/p/7730690.html Linux常用命令大全(非常全!!!) 最近都在和Linux打交道,感觉还不错.我觉得 ...

  8. 类型:linux;问题:linux命令;结果:Linux常用命令大全

    Linux常用命令大全 QQ空间新浪微博腾讯微博人人网豆瓣网百度空间百度搜藏开心网复制更多1997 系统信息 arch 显示机器的处理器架构(1) uname -m 显示机器的处理器架构(2) una ...

  9. Linux常用命令大全(全全全!!!)

    Linux常用命令大全(非常全!!!) 最近都在和Linux打交道,感觉还不错.我觉得Linux相比windows比较麻烦的就是很多东西都要用命令来控制,当然,这也是很多人喜欢linux的原因,比较短 ...

随机推荐

  1. 逻辑回归 之 Logist 推导

    Logist从概率角度认识 可以咱学校教材大二版的<> - 山大版, 来整一波, 为了简化推导形式呢, 这里就假设2个样本空间的形式来展开, 基于(条件概率) 全概率与贝叶斯 作为核心. ...

  2. Emmagee的基本使用

    Emmagee的基本使用 注意:目前最新版本为2.5.1:由于谷歌限制仅支持安卓7.0以下版本: 一.Emmagee介绍 Emmagee是一个简单易上手的Android性能监测工具,主要用于监测单个A ...

  3. angularJS开发环境搭建和启动

    本文目录:1.angularJS框架简介 2.angularJS环境搭建 3.启动一个项目 1.angularJS框架简介 AngularJS是一个开发动态Web应用的框架.它让你可以使用HTML作为 ...

  4. mysql 常用命令 | 表间 弱关联 join

    show databases; use mhxy; select database(); show tables; desc account_list_175; ),(); select from_u ...

  5. 前端知识--mulline框架,返回到前一个页面,并且刷新前一个页面

    最近在写项目的时候,遇到了这样一个问题,在第二页面修改完了数据之后,点击返回按钮的时候,第一个页面要返显出第一个页面的数据,这想想其实也不是很难,但是,难就难在,这两个页面是同时打开的.关闭了一个页面 ...

  6. jsbridge与通信模型

    三层通信模型: 应用层.解释层.会话层: 通信协议: 通信原语: 报文格式: 网络层: _evaluateJavascript 会话层: #define kQueueHasMessage   @&qu ...

  7. 设置web应用的 context root (转)-- web project setting

    context root确定了Tomcat将那些URL请求转发到Web应用. 如果应用的context root 设置为 myapp,除非存在更为明确context root的Web应用,那么所有 / ...

  8. minikube 安装试用

    目前使用k8s 要么用的物理机搭建的环境,要么就是使用docker for mac 中kubernetes 的特性,为了本地调试方便,使用下minikube minukube 包含的特性 负载均衡器 ...

  9. uniapp登录流程详解uni.login

    uni.login(OBJECT)登录 H5平台登陆注意事项: 微信内嵌浏览器运行H5版时,可通过js sdk实现微信登陆,需要引入一个单独的js,详见普通浏览器上实现微信登陆,并非开放API,需要向 ...

  10. web前端开发高级

    前端高效开发框架技术与应用 Vue 基础Vue 框架简介 MVX 模式介绍Vue 框架概述如何使用 Vue.js 基础语法 实例对象生命周期模板语法计算属性Methods 方法 渲染 列表渲染条件渲染 ...