利用OVS+FLOODLIGHT，为数据表添加VLAN_ID和MPLS

话不多说，直接上拓扑：

我这里是用主机h1 （10.0.0.1）ping 主机h2(10.0.0.2)

---

1.添加VLAN标签

v1:
sudo ovs-ofctl add-flow m1-s1 in_port=,actions=mod_vlan_vid:,output:
v2:
sudo ovs-ofctl add-flow m1-s2 in_port=,dl_vlan=,action=output:
v3:
sudo ovs-ofctl add-flow m1-s3 in_port=,dl_vlan=,actions=strip_vlan,output:

2.添加MPLS标签

注意：ping是先用arp协议查看目标ip的mac地址，在发送icmp数据包，所以加标签完了去标签的时候要注意区分包类型！

V1
sudo ovs-ofctl add-flow -O OpenFlow13 m1-s1 icmp,in_port=,actions=push_mpls:0x8847,set_field:-\>mpls_label,output:
sudo ovs-ofctl add-flow -O OpenFlow13 m1-s1 arp,in_port=,actions=push_mpls:0x8847,set_field:-\>mpls_label,output:
V2
//改为ip协议 ，支持icmp
sudo ovs-ofctl add-flow -O OpenFlow13 m1-s2 mpls,in_port=,mpls_label=,actions=pop_mpls:0x0800,output:
sudo ovs-ofctl add-flow -O OpenFlow13 m1-s2 mpls,in_port=,mpls_label=,actions=pop_mpls:0x0806,output:
V3
sudo ovs-ofctl add-flow m1-s3 in_port=,actions=output:

附加：OVS操作cmd:

查看交换机流表
sudo ovs-ofctl dump-flows br0 "in_port=1"

删除指定交换机流表
sudo ovs-ofctl del-flows m1-s2

3.结果：