maven_修改setting ,改为自己私服或者OSC开源中国 [为解决sqlite-jdbc 在中央仓库找不到]
因为项目要使用到sqlite ,虽然有现成的jar,但是考虑的项目的易用统一管理,决定还是用maven
结果纠结了半天 sqlite-jdbc 在maven默认的仓库根本找不着,于是乎修改 setting 采用开源中国基于neuxs
的仓库
<dependency>
<groupId>com.github.axet.sqlite4java</groupId>
<artifactId>sqlite4java</artifactId>
<version>0.282-3</version>
</dependency>
<dependency>
<groupId>org.xerial</groupId>
<artifactId>sqlite-jdbc</artifactId>
<version>3.7.2</version>
</dependency>
修改 : C:\Users\Administrator\.m2\settings.xml
<mirrors>
<!-- mirror | Specifies a repository mirror site to use instead of a given
repository. The repository that | this mirror serves has an ID that matches
the mirrorOf element of this mirror. IDs are used | for inheritance and direct
lookup purposes, and must be unique across the set of mirrors. | -->
<mirror>
<id>nexus-osc</id>
<mirrorOf>*</mirrorOf>
<name>Nexus osc</name>
<url>http://maven.oschina.net/content/groups/public/</url>
</mirror>
</mirrors>
重启工具
xml 不好找的 参照下边儿
<?xml version="1.0" encoding="UTF-8"?> <!--
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements. See the NOTICE file
distributed with this work for additional information
regarding copyright ownership. The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an
"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied. See the License for the
specific language governing permissions and limitations
under the License.
--> <!--
| This is the configuration file for Maven. It can be specified at two levels:
|
| 1. User Level. This settings.xml file provides configuration for a single user,
| and is normally provided in ${user.home}/.m2/settings.xml.
|
| NOTE: This location can be overridden with the CLI option:
|
| -s /path/to/user/settings.xml
|
| 2. Global Level. This settings.xml file provides configuration for all Maven
| users on a machine (assuming they're all using the same Maven
| installation). It's normally provided in
| ${maven.home}/conf/settings.xml.
|
| NOTE: This location can be overridden with the CLI option:
|
| -gs /path/to/global/settings.xml
|
| The sections in this sample file are intended to give you a running start at
| getting the most out of your Maven installation. Where appropriate, the default
| values (values used when the setting is not specified) are provided.
|
|-->
<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">
<!-- localRepository
| The path to the local repository maven will use to store artifacts.
|
| Default: ~/.m2/repository -->
<localRepository>/develop_tools/.m2/repository</localRepository>
<interactiveMode>true</interactiveMode>
<offline>false</offline>
<!-- interactiveMode
| This will determine whether maven prompts you when it needs input. If set to false,
| maven will use a sensible default value, perhaps based on some other setting, for
| the parameter in question.
|
| Default: true --> <!-- offline
| Determines whether maven should attempt to connect to the network when executing a build.
| This will have an effect on artifact downloads, artifact deployment, and others.
|
| Default: false --> <!-- pluginGroups
| This is a list of additional group identifiers that will be searched when resolving plugins by their prefix, i.e.
| when invoking a command line like "mvn prefix:goal". Maven will automatically add the group identifiers
| "org.apache.maven.plugins" and "org.codehaus.mojo" if these are not already contained in the list.
|-->
<pluginGroups>
<!-- pluginGroup
| Specifies a further group identifier to use for plugin lookup.
<pluginGroup>com.your.plugins</pluginGroup>
-->
</pluginGroups> <!-- proxies
| This is a list of proxies which can be used on this machine to connect to the network.
| Unless otherwise specified (by system property or command-line switch), the first proxy
| specification in this list marked as active will be used.
|-->
<proxies>
<!-- proxy
| Specification for one proxy, to be used in connecting to the network.
|
<proxy>
<id>optional</id>
<active>true</active>
<protocol>http</protocol>
<username>proxyuser</username>
<password>proxypass</password>
<host>proxy.host.net</host>
<port>80</port>
<nonProxyHosts>local.net|some.host.com</nonProxyHosts>
</proxy>
-->
</proxies> <!-- servers
| This is a list of authentication profiles, keyed by the server-id used within the system.
| Authentication profiles can be used whenever maven must make a connection to a remote server.
|-->
<servers>
<!-- server
| Specifies the authentication information to use when connecting to a particular server, identified by
| a unique name within the system (referred to by the 'id' attribute below).
|
| NOTE: You should either specify username/password OR privateKey/passphrase, since these pairings are
| used together.
|
<server>
<id>deploymentRepo</id>
<username>repouser</username>
<password>repopwd</password>
</server>
--> <!-- Another sample, using keys to authenticate.
<server>
<id>siteServer</id>
<privateKey>/path/to/private/key</privateKey>
<passphrase>optional; leave empty if not used.</passphrase>
</server>
--> <server>
<id>nexus-releases</id>
<username>admin</username>
<password>admin123</password>
</server>
<server>
<id>nexus-snapshots</id>
<username>admin</username>
<password>admin123</password>
</server>
</servers> <!-- mirrors
| This is a list of mirrors to be used in downloading artifacts from remote repositories.
|
| It works like this: a POM may declare a repository to use in resolving certain artifacts.
| However, this repository may have problems with heavy traffic at times, so people have mirrored
| it to several places.
|
| That repository definition will have a unique id, so we can create a mirror reference for that
| repository, to be used as an alternate download site. The mirror site will be the preferred
| server for that repository.
|-->
<mirrors>
<!-- mirror
| Specifies a repository mirror site to use instead of a given repository. The repository that
| this mirror serves has an ID that matches the mirrorOf element of this mirror. IDs are used
| for inheritance and direct lookup purposes, and must be unique across the set of mirrors.
|
<mirror>
<id>mirrorId</id>
<mirrorOf>repositoryId</mirrorOf>
<name>Human Readable Name for this Mirror.</name>
<url>http://my.repository.com/repo/path</url>
</mirror>
--> <!--<mirror>
<id>nexus</id>
<mirrorOf>*</mirrorOf>
<name>Nexus</name>
<url>http://192.168.80.132:8060/nexus/content/groups/public/</url>
</mirror>
-->
<mirror>
<id>nexus-osc</id>
<mirrorOf>*</mirrorOf>
<name>Nexus osc</name>
<url>http://maven.oschina.net/content/groups/public/</url>
</mirror>
</mirrors> <!-- profiles
| This is a list of profiles which can be activated in a variety of ways, and which can modify
| the build process. Profiles provided in the settings.xml are intended to provide local machine-
| specific paths and repository locations which allow the build to work in the local environment.
|
| For example, if you have an integration testing plugin - like cactus - that needs to know where
| your Tomcat instance is installed, you can provide a variable here such that the variable is
| dereferenced during the build process to configure the cactus plugin.
|
| As noted above, profiles can be activated in a variety of ways. One way - the activeProfiles
| section of this document (settings.xml) - will be discussed later. Another way essentially
| relies on the detection of a system property, either matching a particular value for the property,
| or merely testing its existence. Profiles can also be activated by JDK version prefix, where a
| value of '1.4' might activate a profile when the build is executed on a JDK version of '1.4.2_07'.
| Finally, the list of active profiles can be specified directly from the command line.
|
| NOTE: For profiles defined in the settings.xml, you are restricted to specifying only artifact
| repositories, plugin repositories, and free-form properties to be used as configuration
| variables for plugins in the POM.
|
|-->
<profiles>
<!-- profile
| Specifies a set of introductions to the build process, to be activated using one or more of the
| mechanisms described above. For inheritance purposes, and to activate profiles via <activatedProfiles/>
| or the command line, profiles have to have an ID that is unique.
|
| An encouraged best practice for profile identification is to use a consistent naming convention
| for profiles, such as 'env-dev', 'env-test', 'env-production', 'user-jdcasey', 'user-brett', etc.
| This will make it more intuitive to understand what the set of introduced profiles is attempting
| to accomplish, particularly when you only have a list of profile id's for debug.
|
| This profile example uses the JDK version to trigger activation, and provides a JDK-specific repo.
<profile>
<id>jdk-1.4</id> <activation>
<jdk>1.4</jdk>
</activation> <repositories>
<repository>
<id>jdk14</id>
<name>Repository for JDK 1.4 builds</name>
<url>http://www.myhost.com/maven/jdk14</url>
<layout>default</layout>
<snapshotPolicy>always</snapshotPolicy>
</repository>
</repositories>
</profile>
--> <!--
| Here is another profile, activated by the system property 'target-env' with a value of 'dev',
| which provides a specific path to the Tomcat instance. To use this, your plugin configuration
| might hypothetically look like:
|
| ...
| <plugin>
| <groupId>org.myco.myplugins</groupId>
| <artifactId>myplugin</artifactId>
|
| <configuration>
| <tomcatLocation>${tomcatPath}</tomcatLocation>
| </configuration>
| </plugin>
| ...
|
| NOTE: If you just wanted to inject this configuration whenever someone set 'target-env' to
| anything, you could just leave off the <value/> inside the activation-property.
|
<profile>
<id>env-dev</id> <activation>
<property>
<name>target-env</name>
<value>dev</value>
</property>
</activation> <properties>
<tomcatPath>/path/to/tomcat/instance</tomcatPath>
</properties>
</profile>
-->
<profile>
<id>nexus</id>
<repositories>
<repository>
<id>central</id>
<name>Nexus</name>
<url>http://central</url>
<releases>
<enabled>true</enabled>
</releases>
<snapshots>
<enabled>true</enabled>
</snapshots>
</repository>
</repositories>
<pluginRepositories>
<pluginRepository>
<id>central</id>
<name>Nexus</name>
<url>http://central</url>
<releases>
<enabled>true</enabled>
</releases>
<snapshots>
<enabled>true</enabled>
</snapshots>
</pluginRepository>
</pluginRepositories> </profile>
</profiles> <!-- activeProfiles
| List of profiles that are active for all builds.
|
-->
<activeProfiles>
<activeProfile>nexus</activeProfile>
</activeProfiles> </settings>
maven_修改setting ,改为自己私服或者OSC开源中国 [为解决sqlite-jdbc 在中央仓库找不到]的更多相关文章
- Nexus搭建Maven私服中央仓库
一.概述 1.概要 现在的项目基本都是用Maven来管理工程,这样一来在公司内容搭建一个私服就非常有必要了,这样一来可以管理公司内部用的JAR包,也可以管理第三方的各种JAR来,以免每次都要从外网的仓 ...
- Maven的默认中央仓库以及修改默认仓库&配置第三方jar包从私服下载
当构建一个Maven项目时,首先检查pom.xml文件以确定依赖包的下载位置,执行顺序如下: 1.从本地资源库中查找并获得依赖包,如果没有,执行第2步. 2.从Maven默认中央仓库中查找并获得依赖包 ...
- 转:Maven的默认中央仓库以及修改默认仓库&配置第三方jar包从私服下载
当构建一个Maven项目时,首先检查pom.xml文件以确定依赖包的下载位置,执行顺序如下: 1.从本地资源库中查找并获得依赖包,如果没有,执行第2步. 2.从Maven默认中央仓库中查找并获得依赖包 ...
- Maven 本地仓库,远程仓库,中央仓库,Nexus私服,镜像 详解
一. 本地仓库 本地仓库是远程仓库的一个缓冲和子集,当你构建Maven项目的时候,首先会从本地仓库查找资源,如果没有,那么Maven会从远程仓库下载到你本地仓库.这样在你下次使用的时候就不需要从远程下 ...
- ubuntu下修改mysql默认字符编码出现的Job failed to start解决办法
ubuntu下修改mysql默认字符编码出现的Job failed to start解决办法 前几天卸掉了用了好多年的Windows,安装了Ubuntu12.04,就开始各种搭环境.今天装好了MySQ ...
- maven如何修改本地仓库与中央仓库
摘要: 运行Maven的时候,Maven所需要的任何构件都是直接从本地仓库获取的.如果本地仓库没有,它会首先尝试从远程仓库下载构件至本地仓库,然后再使用本地仓库的构件. 什么是Maven仓库 在不用M ...
- maven修改本地仓库,远程仓库与中央仓库
什么是Maven仓库 在不用Maven的时候,比如说以前我们用Ant构建项目,在项目目录下,往往会看到一个名为/lib的子目录,那里存放着各类第三方依赖jar文件,如 log4j.jar,junit. ...
- 因修改/etc/sudoers权限导致sudo和su不能使用的解决方法(转)
转自: 因修改/etc/sudoers权限导致sudo和su不能使用的解决方法 系统环境:ubuntu 12.04 状况: 因为修改了/etc/sudoers以及相关权限,导致sudo无法使用,恰 ...
- 修改计算机名或IP后Oracle10g无法启动服务的解决办法
修改计算机名或IP后Oracle10g无法启动服务的解决办法 遇到的问题,问题产生原因不详.症状为,windows服务中有一项oracle服务启动不了,报出如下错误. Windows 不能在 本地计算 ...
随机推荐
- POJ3623:Best Cow Line, Gold(后缀数组)
Description FJ is about to take his N (1 ≤ N ≤ 30,000) cows to the annual"Farmer of the Year&qu ...
- Directx11学习笔记【二】 将HelloWin封装成类
我们把上一个教程的代码封装到一个类中来方便以后的使用. 首先新建一个空工程叫做MyHelloWin,添加一个main.cpp文件,然后新建一个类叫做MyWindow,将于窗体有关的操作封装到里面 My ...
- Visual Studio 连接不上NuGet 官方程序包源的解决办法
修改dns 即可
- Zen Coding in Visual Studio 2012
http://www.johnpapa.net/zen-coding-in-visual-studio-2012 Zen Coding is a faster way to write HTML us ...
- Ini文件帮助类
.ini文件是什么 .ini 文件是Initialization File的缩写,就是初始化文件.在Windows系统中,其是配置文件所采用的存储格式(主要是system.ini,win.ini,sy ...
- 默认情况下安装的应用程序C盘后提示权限不足,当你开始介意。。。
最近,不少用户抱怨的经销商.正在使用win 7我们的计算机系统上安装软件后,提示权限不够开放系统,无法启动软件. 在xp该系统是没有问题的.原因是,我们会选择在默认安装路径系统C-disk.和win ...
- 避免内存重叠memmove()性能
#include <iostream> #include <string.h> using namespace std; void* memmove(void *dst, co ...
- sdut 上机练习8面向对象编程(对象的数组)
上机练习8面向对象编程(对象的数组) Time Limit: 1000MS Memory limit: 65536K 题目描写叙述 利用类对象数组完毕N个学生数据(学号是字符串类型.成绩是整型)的输入 ...
- 恢复Ubuntu引导菜单
介绍 当使用双系统,我们经常重Windows! 有没有一种方法:刚刚重装Windows而不重装Ubuntu呢? 在使用Win XP/Ubuntu双系统时.这个问题非常好解决!可是在使用Win7(包括V ...
- zoj-3795-Grouping-tarjan确定最长的公路收缩
使用tarjan缩合点. 然后,dfs寻找最长的公路. 水体. . . #include<stdio.h> #include<string.h> #include<alg ...