-bash: xhost: command not found
参考自:http://blog.csdn.net/csdnones/article/details/51513163,感谢原作者解决了我的问题。
执行xhost +,报以下错误,原因是因未没有安装相关的包(其他类似command not found命令没有可以用这种方式解决)
[root@rac01 ~]# xhost +
-bash: xhost: command not found
安装该包即可:
[root@rac01 ~]# yum whatprovides "*/xhost"
Loaded plugins: product-id, security, subscription-manager
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
base/filelists_db | 3.4 MB 00:00 ...
xorg-x11-server-utils-7.7-2.el6.x86_64 : X.Org X11 X server utilities
Repo : base
Matched from:
Filename : /usr/bin/xhost
[root@rac01 ~]# yum -y install xorg-x11-server-utils-7.7-2.el6.x86_64
Loaded plugins: product-id, security, subscription-manager
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package xorg-x11-server-utils.x86_64 0:7.7-2.el6 will be installed
--> Processing Dependency: mcpp for package: xorg-x11-server-utils-7.7-2.el6.x86_64
--> Processing Dependency: libXxf86misc.so.1()(64bit) for package: xorg-x11-server-utils-7.7-2.el6.x86_64
--> Running transaction check
---> Package libXxf86misc.x86_64 0:1.0.3-4.el6 will be installed
---> Package mcpp.x86_64 0:2.7.2-4.1.el6 will be installed
--> Processing Dependency: libmcpp.so.0()(64bit) for package: mcpp-2.7.2-4.1.el6.x86_64
--> Running transaction check
---> Package libmcpp.x86_64 0:2.7.2-4.1.el6 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
=======================================================================================================
Package Arch Version Repository Size
=======================================================================================================
Installing:
xorg-x11-server-utils x86_64 7.7-2.el6 base 155 k
Installing for dependencies:
libXxf86misc x86_64 1.0.3-4.el6 base 18 k
libmcpp x86_64 2.7.2-4.1.el6 base 69 k
mcpp x86_64 2.7.2-4.1.el6 base 23 k
Transaction Summary
=======================================================================================================
Install 4 Package(s)
Total download size: 265 k
Installed size: 570 k
Downloading Packages:
-------------------------------------------------------------------------------------------------------
Total 2.2 MB/s | 265 kB 00:00
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Installing : libXxf86misc-1.0.3-4.el6.x86_64 1/4
Installing : libmcpp-2.7.2-4.1.el6.x86_64 2/4
Installing : mcpp-2.7.2-4.1.el6.x86_64 3/4
Installing : xorg-x11-server-utils-7.7-2.el6.x86_64 4/4
Verifying : libmcpp-2.7.2-4.1.el6.x86_64 1/4
Verifying : xorg-x11-server-utils-7.7-2.el6.x86_64 2/4
Verifying : libXxf86misc-1.0.3-4.el6.x86_64 3/4
Verifying : mcpp-2.7.2-4.1.el6.x86_64 4/4
Installed:
xorg-x11-server-utils.x86_64 0:7.7-2.el6
Dependency Installed:
libXxf86misc.x86_64 0:1.0.3-4.el6 libmcpp.x86_64 0:2.7.2-4.1.el6 mcpp.x86_64 0:2.7.2-4.1.el6
Complete!
-bash: xhost: command not found的更多相关文章
- linux报错-bash: xhost: command not found
本帖转自倔强小梦https://www.cnblogs.com/xphdbky/p/8243008.html 倔强小梦参考自:http://blog.csdn.net/csdnones/article ...
- 【linux报错】-bash: xhost: command not found
参考自:http://blog.csdn.net/csdnones/article/details/51513163,感谢原作者解决了我的问题. 执行xhost +,报以下错误,原因是因未没有安装相关 ...
- scp报错 -bash: scp: command not found
环境:RHEL6.5 使用scp命令报错: [root@oradb23 media]# scp /etc/hosts oradb24:/etc/ -bash: scp: command not fou ...
- source /etc/profile报错-bash: id:command is not found
由于误操作导致 source /etc/profile 报错 -bash: id:command is not found 此时,linux下很多命令到不能能用,包括vi ls 等... 可以使用 e ...
- -bash: .bash_profile: command not found
今天有一同事安装了ORACLE后,在切换账号时遇到错误提示"-bash: .bash_profile: command not found".如下所示 [root@GLETestL ...
- Linux下提示 bash: xxx command not found
今天在虚拟机上安装了CentOS5.5,发现运行一些很正常的诸如:init,shutdown,fdisk 等命令时,悍然提示: bash: xxx command not found. 那么,首先就要 ...
- [原创]-bash: iostat: command not found解决办法
[root@testhost ~]# iostat-bash: iostat: command not found IOSTAT 命令不可用,首先确认sysstat包是否安装,sysstat包中包括i ...
- # mysql -u root -p -bash: mysql: command not found
[root@jboss ~]# mysql -u root -p-bash: mysql: command not found 需要安装mysql # yum install mysql之后就行 了
- bash:fdisk:command not found
bash:fdisk:command not found [lansir@Red-Hat ~]$ fdisk -l-bash: fdisk: command not found 原因是fdisk不在P ...
随机推荐
- Springboot 文件上传(带进度条)
1. 相关依赖 pom.xml <project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http ...
- 关于linux - Centos 7 系统下使用PXE网络的方式(pxe+dhcpd+tftp+httpd)安装操作系统
PXE(Pre-boot Execution Environment)是由Intel设计的协议,它可以使计算机通过网络而不是从本地硬盘.光驱等设备启动. 现代的网卡,一般都内嵌支持PXE的ROM芯片. ...
- geotrellis使用(四十二)将 Shp 文件转为 GeoJson
前言 一个多月没有写博客了,今天尝试着动笔写点. 原因很多,最重要的原因是我转行了.是的,我离开了开发岗位,走向了开发的天敌-产品经理.虽然名义上是产品经理,但是干的事情也很杂,除了不写代码,其他的都 ...
- Java正则表达式使用 | 叠加
public class Test { public static void main(String[] args) { String s = "ni\nhao\nma he yi\nyon ...
- 最大团&优化
貌似咕了三个半月了(gym101915里一道),今天又遇到一道(cf1105E),就学了学惹. 最大团定义:图上取尽可能多的点,这些点构成一个完全图. 最大独立集:图上取尽可能多的点,任意两点间不连接 ...
- hibernate03增删改查
<?xml version="1.0"?> <!DOCTYPE hibernate-mapping PUBLIC "-//Hibernate/Hiber ...
- java学习之路--String类的基本方法
String类常见的功能 获取 1.1 字符串中包含的字符数,也就是获取字符串的长度:int length(); 1.2 根据位置获取某个位置上的字符:char charAt(int index) 1 ...
- python全栈开发 * 进程之间的通信,进程之间数据共享 * 180726
进程之间的通信(IPC)队列和管道一.队列 基于管道实现 管道 + 锁 数据安全(一).队列 队列遵循先进先出原则(FIFO) 多用于维护秩序,买票,秒杀 队列的所有方法: put()(给队列里添加数 ...
- A - Shashlik Cooking CodeForces - 1040B
http://codeforces.com/problemset/problem/1040/B Long story short, shashlik is Miroslav's favorite fo ...
- 可视化&地图__公司收集
原文地址:https://github.com/zhongcaiwei/Data-visualization-technology-sharing 一.数据可视化企业(部分) 数字冰雹 光启元-腾讯 ...