av_read_frame, av_write_frame等 经常会返回负值也即写数据包失败。不同的负值代表不同的含义,可以根据错误码定义,定位问题。

#define EPERM            1      /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Arg list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#define EAGAIN 11 /* Try again */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */
#define EDEADLK 35 /* Resource deadlock would occur */
#define ENAMETOOLONG 36 /* File name too long */
#define ENOLCK 37 /* No record locks available */
#define ENOSYS 38 /* Function not implemented */
#define ENOTEMPTY 39 /* Directory not empty */
#define ELOOP 40 /* Too many symbolic links encountered */
#define EWOULDBLOCK EAGAIN /* Operation would block */
#define ENOMSG 42 /* No message of desired type */
#define EIDRM 43 /* Identifier removed */
#define ECHRNG 44 /* Channel number out of range */
#define EL2NSYNC 45 /* Level 2 not synchronized */
#define EL3HLT 46 /* Level 3 halted */
#define EL3RST 47 /* Level 3 reset */
#define ELNRNG 48 /* Link number out of range */
#define EUNATCH 49 /* Protocol driver not attached */
#define ENOCSI 50 /* No CSI structure available */
#define EL2HLT 51 /* Level 2 halted */
#define EBADE 52 /* Invalid exchange */
#define EBADR 53 /* Invalid request descriptor */
#define EXFULL 54 /* Exchange full */
#define ENOANO 55 /* No anode */
#define EBADRQC 56 /* Invalid request code */
#define EBADSLT 57 /* Invalid slot */ #define EDEADLOCK EDEADLK #define EBFONT 59 /* Bad font file format */
#define ENOSTR 60 /* Device not a stream */
#define ENODATA 61 /* No data available */
#define ETIME 62 /* Timer expired */
#define ENOSR 63 /* Out of streams resources */
#define ENONET 64 /* Machine is not on the network */
#define ENOPKG 65 /* Package not installed */
#define EREMOTE 66 /* Object is remote */
#define ENOLINK 67 /* Link has been severed */
#define EADV 68 /* Advertise error */
#define ESRMNT 69 /* Srmount error */
#define ECOMM 70 /* Communication error on send */
#define EPROTO 71 /* Protocol error */
#define EMULTIHOP 72 /* Multihop attempted */
#define EDOTDOT 73 /* RFS specific error */
#define EBADMSG 74 /* Not a data message */
#define EOVERFLOW 75 /* Value too large for defined data type */
#define ENOTUNIQ 76 /* Name not unique on network */
#define EBADFD 77 /* File descriptor in bad state */
#define EREMCHG 78 /* Remote address changed */
#define ELIBACC 79 /* Can not access a needed shared library */
#define ELIBBAD 80 /* Accessing a corrupted shared library */
#define ELIBSCN 81 /* .lib section in a.out corrupted */
#define ELIBMAX 82 /* Attempting to link in too many shared libraries */
#define ELIBEXEC 83 /* Cannot exec a shared library directly */
#define EILSEQ 84 /* Illegal byte sequence */
#define ERESTART 85 /* Interrupted system call should be restarted */
#define ESTRPIPE 86 /* Streams pipe error */
#define EUSERS 87 /* Too many users */
#define ENOTSOCK 88 /* Socket operation on non-socket */
#define EDESTADDRREQ 89 /* Destination address required */
#define EMSGSIZE 90 /* Message too long */
#define EPROTOTYPE 91 /* Protocol wrong type for socket */
#define ENOPROTOOPT 92 /* Protocol not available */
#define EPROTONOSUPPORT 93 /* Protocol not supported */
#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT 96 /* Protocol family not supported */
#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
#define EADDRINUSE 98 /* Address already in use */
#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
#define ENETDOWN 100 /* Network is down */
#define ENETUNREACH 101 /* Network is unreachable */
#define ENETRESET 102 /* Network dropped connection because of reset */
#define ECONNABORTED 103 /* Software caused connection abort */
#define ECONNRESET 104 /* Connection reset by peer */
#define ENOBUFS 105 /* No buffer space available */
#define EISCONN 106 /* Transport endpoint is already connected */
#define ENOTCONN 107 /* Transport endpoint is not connected */
#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS 109 /* Too many references: cannot splice */
#define ETIMEDOUT 110 /* Connection timed out */
#define ECONNREFUSED 111 /* Connection refused */
#define EHOSTDOWN 112 /* Host is down */
#define EHOSTUNREACH 113 /* No route to host */
#define EALREADY 114 /* Operation already in progress */
#define EINPROGRESS 115 /* Operation now in progress */
#define ESTALE 116 /* Stale NFS file handle */
#define EUCLEAN 117 /* Structure needs cleaning */
#define ENOTNAM 118 /* Not a XENIX named type file */
#define ENAVAIL 119 /* No XENIX semaphores available */
#define EISNAM 120 /* Is a named type file */
#define EREMOTEIO 121 /* Remote I/O error */
#define EDQUOT 122 /* Quota exceeded */ #define ENOMEDIUM 123 /* No medium found */
#define EMEDIUMTYPE 124 /* Wrong medium type */

并不是每个错误号,我都遇到过,所以也敢保证每个错误号的解释都正确,如果有人碰到错误号跟解释不匹配的请告诉我,35019870,谢谢。

ffmpeg 错误码的更多相关文章

  1. ffmpeg错误码

    以下ffmpeg错误代码及翻译是本人遇到或发现后整理出来的,不保证包含全部错误代码 EPERM(不允许操作,无相应权限) = -1 ENOENT(文件或目录不存在) = -2 ESRCH(线程不存在) ...

  2. 腾讯开放平台 手机QQ登录 错误码:110406 解决办法

    作者:Panda Fang 出处:http://www.cnblogs.com/lonkiss/p/4204284.html 原创文章,转载请注明作者和出处,未经允许不可用于商业营利活动 腾讯开发平台 ...

  3. Windows错误码解析

    C或者C++开发肯定经常会遇到各种错误码,由于每个错误码只是一个枚举或者一个整形数值,调试或者输出日志的时候,无法知道这个错误码的具体含义,这时候就需要将此错误码解释出来.对于自己定义的错误码,可以通 ...

  4. win7中 SQL server 2005无法连接到服务器,错误码:18456

    win7中 SQL server 2005无法连接到服务器,错误码:18456.. 数据库刚装完.我用Windows登陆  结果登陆不上去.. 选中SQL Server Management Stud ...

  5. Xcode奔溃错误码

    在这里了解一下XCode用来表示各种崩溃类型的术语,补充一些这方面的各知识.崩溃通常是指操作系统向正在运行的程序发送的信号,所以我们在查看崩溃日志时,常常看到如下错误摘要:Application re ...

  6. 微信支付:curl出错,错误码:60

    如下是运行微信支付测试代码时出错代码: Fatal error: Uncaught exception ‘WxPayException‘ with message ‘curl出错,错误码:60‘ in ...

  7. 微信支付curl出错及错误码解决方案

    1. curl错误码6 出现场景 PHP Fatal error: Uncaught exception 'WxPayException' with message 'curl出错,错误码:6' in ...

  8. 【Fine原创】常见的HTTP错误码的具体含义整理

    常见的HTTP错误码的具体含义     "100" : Continue   客户端应当继续发送请求. "101" : witching Protocols   ...

  9. 蓝牙-HCI错误码列表

    错误码定义: /* Success code */ #define HCI_SUCCESS 0x00 /* Possible error codes */ #define HCI_UNKNOWN_HC ...

随机推荐

  1. Android点击其他任意位置收起软键盘

    在Android应用开发中,经常出现这样的需求,用户在输入文字的过程中,可能不想继续输入了,通过滑动或者点击其他位置(除软键盘和EditText以外的任何位置),希望能够自动收回键盘,这个功能可能有些 ...

  2. Part 5 Select statement in sql server

    Select specific or all columns select * from 表名 select * from Student select 列名,列名... from 表名 select ...

  3. Sql Server 数据库之间如何进行跨网远程连接访问

    场景说明 现在有一台A电脑和一台B电脑,两台电脑都安装了Sql Server数据库,两台电脑不在一个局域网(我们考虑的是不同网络的两台数据库连接),比如A电脑在公司,B电脑在家里,现在我要在家里用B电 ...

  4. xcode5下cocos2dx横竖屏设置

    我们在开发一款游戏之前一定会考虑的一件事就是,我们的游戏是支持横屏还是竖屏,又或者是横竖屏都支持.那么如何在xcode中对项目进行设置呢?下面我就在xcode5.1.1中利用cocos2dx2.2.3 ...

  5. java静态代码块、初始化块和构造方法的执行顺序

    分析:当执行new Child()时,它首先去看父类里面有没有静态代码块,如果有,它先去执行父类里面静态代码块里面的内容,当父类的静态代码块里面的内容执行完毕之后,接着去执行子类(自己这个类)里面的静 ...

  6. OpenGL 回顾——简化版的窗体(包含鼠标控制,普通键位控制,以及镜面反射)

    // OpenGLBook.cpp : 定义控制台应用程序的入口点. // #include "stdafx.h" //变量声明 static GLfloat spin =0.0; ...

  7. 【笔记】Windows Phone 8开发笔记之API

    Windows Phone 8 API一览 Windows Phone 7平台不支持Native语言的开发,这困扰了许多游戏和底层应用的开发者.Windows Phone 8 SDK的推出,改善了这个 ...

  8. 基础学习总结(八)--Intent中显示意图和隐式意图的用法

    Intent(意图)主要是解决Android应用的各项组件之间的通讯.Intent负责对应用中一次操作的动作.动作涉及数据.附加数据进行描述,Android则根据此Intent的描述,负责找到对应的组 ...

  9. WPF 绑定四(层级绑定)

    xaml: <Window x:Class="WpfApplication1.Window4" xmlns="http://schemas.microsoft.co ...

  10. Android砖机救活(索爱MT15i)

    前言 接触Android时间长了就想编译一套属于自己的系统,摘取不必要的那些组件,然后刷到手机上,俗话说的好,“常在河 边走,哪有不湿鞋”.果不其然,刷完自己编译的系统手机变砖了,具体情况为 开不开机 ...