1. you are unfamiliar with the subject area.
  2. you can read / understand the most fundamental aspects of the subject area.
  3. ability to implement small changes, understand basic principles and able to figure out additional details with minimal help.
  4. basic proficiency in a subject area without relying on help.
  5. you are comfortable with the subject area and all routine work on it:For software areas - ability to develop medium programs using all basic language features w/o book, awareness of more esoteric features (with book).For systems areas - understanding of many fundamentals of networking and systems administration, ability to run a small network of systems including recovery, debugging and nontrivial troubleshooting that relies on the knowledge of internals.
  6. an even lower degree of reliance on reference materials. Deeper skills in a field or specific technology in the subject area.
  7. ability to develop large programs and systems from scratch. Understanding of low level details and internals. Ability to design / deploy most large, distributed systems from scratch.
  8. you understand and make use of most lesser known language features, technologies, and associated internals. Ability to automate significant amounts of systems administration.
  9. deep understanding of corner cases, esoteric features, protocols and systems including "theory of operation". Demonstrated ability to design, deploy and own very critical or large infrastructure, build accompanying automation.
  10. could have written the book about the subject area but didn't; works with standards committees on defining new standards and methodologies.
  11. wrote the book on the subject area (there actually has to be a book). Recognized industry expert in the field, might have invented it.

分享google的技能的11个级别,大家看看自己到哪个级别了?的更多相关文章

  1. log4j设置,以及中文乱码,通过过滤器输出指定级别的日志,或者指定级别范围的日志

    配置文件为默认名字log4j.properties时,放在某个模块下的resources下即可,即使有多个模块的情况下,任意一个模块的resources下有这个默认名字的文件log4j.propert ...

  2. Log4J是Apache组织的开源一个开源项目,通过Log4J,可以指定日志信息输出的目的地,如console、file等。Log4J采用日志级别机制,请按照输出级别由低到高的顺序写出日志输出级别。

    Log4J是Apache组织的开源一个开源项目,通过Log4J,可以指定日志信息输出的目的地,如console.file等.Log4J采用日志级别机制,请按照输出级别由低到高的顺序写出日志输出级别. ...

  3. [分享]Google 全球 IP 地址库[Google Global Cache IPs]

    Google 全球 IP 地址库 IP 地址来源:http://www.kookle.co.nr,共计4351个. Bulgaria 93.123.23.1 93.123.23.2 93.123.23 ...

  4. Facebook兆级别图片存储及每秒百万级别图片查询原理

    前言 Facebook(后面简称fb)是世界最大的社交平台,需要存储的数据时刻都在不断剧增(占比最大为图片,每天存储约20亿张,大概是微信的三倍). 那么问题来了,fb是如何存储兆级别的图片?并且又是 ...

  5. 数据库事务隔离级别+Spring 声明性事务隔离级别

    数据库事务隔离级别 数据库提供了四种事务隔离级别, 不同的隔离级别采用不同的锁类开来实现. 在四种隔离级别中, Serializable的级别最高, Read Uncommited级别最低. 大多数数 ...

  6. 【kubernetes 自带监控】 container级别cadvisor+kubelet,集群级别apiserver

    apiserver https://feisky.gitbooks.io/kubernetes/components/apiserver.html kube-apiserver 支持同时提供 http ...

  7. 转:google测试分享-SET和TE

    原文:  http://blog.sina.com.cn/s/blog_6cf812be0102vbnb.html 前端时间看了google测试之道,收获了一些,在此总结下并打算写一个系列blog,顺 ...

  8. Google测试分享-测试经理

    首先大家可以思考下,google的测试经理角色必须具备什么样的能力.据不完全统计,google的测试经理,超过一半之前都做过TE的角色(大家可以想想为啥):对于与被测产品相关的任何使用问题,测试经理都 ...

  9. 转:google测试分享-问题和挑战

    原文: http://blog.sina.com.cn/s/blog_6cf812be0102vxer.html 前言:这个系列分享的内容大部分都是出自于<google是如何测试的>的书, ...

随机推荐

  1. final、finally、finalize的区别

    看C#知识点的时候发现的问题 1.final 修饰符(关键字)如果一个类被声明为final,意味着它不能再派生出新的子类,不能作为父类被继承.因此一个类不能既被声明为 abstract的,又被声明为f ...

  2. boot from volume

    nova boot --flavor 1 --block-device source=image,id=<image_id>,dest=volume,size=5,shutdown=pre ...

  3. DB2死锁的解决办法

    db2 get snapshot for locks on sampledb2 get db cfg for sampledb2 update db cfg using dlchktime 10000 ...

  4. getElementsByTagName获得的不是数组的问题!

    getElementsByTag() returns a NodeList instead of an Array. You can convert a NodeList to an Array bu ...

  5. Angular解决双向数据绑定

    <!DOCTYPE html> <html ng-app="myApp1"><body><div ng-controller=" ...

  6. flex表格的使用

    Flex中表格使用datagrid+columns两个组件构成,dagagrid中定义了表格的外观属性和数据源Columns中定义了表格的列名还有对应的字段,方便从数据源取得数据 数据源的赋值一般有两 ...

  7. (python)图片处理Pillow模块的使用

    Pillow中最重要的类就是Image,该类存在于同名的模块中.可以通过以下几种方式实例化:从文件中读取图片,处理其他图片得到,或者直接创建一个图片. 还有一个类为ImageDraw,用来画图. 1. ...

  8. OD使用教程3

    reverseMe爆破: 跳转指令 让跳转已实现,把z的1改成0 按F8走,继续把z的1改成0,实现跳转 根据跳转指令,改变s或o,使跳转不实现 指令如上使跳转不实现 继续按f8往下走然后成功  

  9. leaflet创建简单地图

    一.leaflet介绍: 1.Leaflet 是一个为建设移动设备友好的互动地图,而开发的现代的.开源的 JavaScript 库.它是由 Vladimir Agafonkin 带领一个专业贡献者团队 ...

  10. 【动态规划】bzoj1642 [Usaco2007 Nov]Milking Time 挤奶时间

    区间按左端点排序,dp. #include<cstdio> #include<algorithm> using namespace std; #define N 1001 st ...