E_GEOMETRY_AMBIGUOUSPARTTYPE - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004024c) The operation would result in the creation of a new part, but the type of part to be created was ambiguous.

E_GEOMETRY_AUTHORITY_TOO_LONG - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004026c) The authority parameter is too long.

E_GEOMETRY_BAD_SPLIT_DISTANCE - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004021c) The specified splitting distance is not included in the curve to be split.

E_GEOMETRY_BADRELATION - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040232) The Relate operator couldn't evalute the specified relation expression.

E_GEOMETRY_BEZIER_EXTEND_EMBEDDED - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040243) ExtendEmbedded not implemented for Bezier curves.

E_GEOMETRY_BUFFER_DISTANCES - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040262) There was a problem obtaining a distance at which to buffer a geometry.

E_GEOMETRY_BUFFER_INVALID_BUFFER_DISTANCE - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004026b) The buffer distance must be a valid floating point number.

E_GEOMETRY_BUFFER_INVALID_END_OPTION - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004026a) The end option used by the BufferConstruction service must be one of: esriBufferFlat, esriBufferRound.

E_GEOMETRY_BUFFER_INVALID_SIDE_OPTION - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040269) The side option used by the BufferConstruction service must be one of: esriBufferLeft, esriBufferRight, esriBufferFull.

E_GEOMETRY_BUFFERCONSTRUCTION_INUSE - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040266) A client has attempted to re-enter a BufferConstruction object while its ConstructBuffers...

E_GEOMETRY_BUFFERFAILURE - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040267) An error occurred during the buffer operation.

E_GEOMETRY_BUFFEROUTOFBOUNDS - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004023b) The buffer coordinates are out of bounds.

E_GEOMETRY_CANNOT_DO_3D_OPERATIONS_ON_CURVES - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040272) Cannot do 3D operations on curve segments.

E_GEOMETRY_CANNOT_EXTRAPOLATE_BY_SEGMENT - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004025f) No segment available to determine extrapolation ratio.

E_GEOMETRY_CANT_CUT_POLYGON - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040231) A cut operation could not classify all parts of the polygon as being left or right of the cutting polyline.

E_GEOMETRY_CANT_EVALUATE_RELATION_MATRIX - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040274) Some combinations of geometries with vertical segments cannot be evaluated with a 9DEM relational expression.

E_GEOMETRY_CANT_QUERY_ON_VERTEX_ATTRIBUTES - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040225) Not used.

E_GEOMETRY_CANT_RESHAPE - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004021e) Not used.

E_GEOMETRY_CONSTRUCTPOINTUNION - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040242) Can't use ConstructUnion on a point.

E_GEOMETRY_DEGENERATEGEOMETRY - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040253) The operation could not be performed because the geometry is degenerate.

E_GEOMETRY_DUPLICATESEGMENTPOINTER - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040255) The same segment has been added to the geometry more than once.

E_GEOMETRY_EDITED_REGIONS_OVERLAP - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004025d) Cannot merge the two geometries.

E_GEOMETRY_EDITS_OVERLAP - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040260) Cannot merge the two geometries.

E_GEOMETRY_EMPTYGEOMETRY - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040202) An operation on an empty geometry was attempted - for example, trying to move or rotate one.

E_GEOMETRY_EQUAL_VERTEX_ATTRIBUTES - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040223) Not used.

E_GEOMETRY_EXTERIORPART - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004024f) An interior part must be specified.

E_GEOMETRY_FILLET_FAILED - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004022f) The fillet could not be constructed according to specs.

E_GEOMETRY_ILLEGALWIN32EXPORT - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040241) Not used.

E_GEOMETRY_INCONSISTANT_DIMENSIONS - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040229) Input geometries do not have same dimensions.

E_GEOMETRY_INCONSISTANT_PARAMS - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040203) The input parameters could not be reasonably interpreted - for example, asking for the 2d result of a polyline/polygon intersection.

E_GEOMETRY_INCONSISTANT_SPATIAL_REFERENCE - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040215) Input geometries do not have same spatial reference.输入几何要素的空间参考不一致或缺失。

E_GEOMETRY_INPUT_TYPE_INCORRECT - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004025c) The geometries must be polylines or polygons.

E_GEOMETRY_INPUT_TYPE_MISMATCH - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004025b) The geometries are not all of the same type.

E_GEOMETRY_INSUFFICIENT_CONTROLPOINTS - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040256) The number of control points is insufficient.

E_GEOMETRY_INTERIORPART - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040219) Not used.

E_GEOMETRY_INTERNALERROR - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040239) An internal error has occurred in the geometry system.

E_GEOMETRY_INVALID_ANGLE - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004020d) An arc construction operation was given an invalid angle.

E_GEOMETRY_INVALID_AXES - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040230) An elliptic arc construction operation was given invalid axes.

E_GEOMETRY_INVALID_CHORD - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040205) An arc construction operation was given an invalid chord distance.

E_GEOMETRY_INVALID_RADIUS - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040204) An arc construction operation was given an invalid radius.

E_GEOMETRY_INVALIDCONSTRUCTION - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040246) Not used.

E_GEOMETRY_INVALIDCOUNT - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004024e) The number of items specified is too high or too low in the given context.

E_GEOMETRY_INVALIDRINGORDER - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004024d) The ordering of rings and types is invalid.

E_GEOMETRY_INVALIDRINGTYPE - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004024b) The given ring is not of the required type within the multipatch.

E_GEOMETRY_M_OUT_OF_BOUNDS - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040271) The m coordinates of this geometry are out of bounds.

E_GEOMETRY_NO_VALID_VERTEX_ATTRIBUTES - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040226) Not used.

E_GEOMETRY_NONENVELOPE - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040206) Not used.

E_GEOMETRY_NONGEOMETRY - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040221) Something other than a geometry was encountered.

E_GEOMETRY_NONMULTIPATCH - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040249) Something other than a multipatch was encountered.

E_GEOMETRY_NONPART - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040207) Not used.

E_GEOMETRY_NONPATH - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004020e) Not used.

E_GEOMETRY_NONPOINT - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040210) Something other than a point was added to a multipoint.

E_GEOMETRY_NONPOLYGON - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004021f) Something other than a polygon was encountered.

E_GEOMETRY_NONPOLYLINE - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040220) Something other than a polyline was encountered.

E_GEOMETRY_NONSEGMENT - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004020f) Not used.

E_GEOMETRY_NONTRIANGLEFAN - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040251) The input interface does not belong to a triangle fan object.

E_GEOMETRY_NONTRIANGLESTRIP - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040250) The input interface does not belong to a triangle strip object.

E_GEOMETRY_NONVECTOR3D - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040252) The input interface does not belong to a 3-dimensional vector.

E_GEOMETRY_NOPENDINGMOVETO - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004023f) The SegmentGraphCursor has no unfinished MoveTo operation.

E_GEOMETRY_NOT_BEZIERCURVES - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040257) The participating segments must be Bezier curves.

E_GEOMETRY_NOT_ID_AWARE - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040240) The geometry is not ID-aware.

E_GEOMETRY_NOT_M_AWARE - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040235) The geometry is not M-aware.

E_GEOMETRY_NOT_M_SIMPLE - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040245) The geometry has undefined M values for some of its vertices.

E_GEOMETRY_NOT_SINGLEPART - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040273) The reshaping polyline must have one part.

E_GEOMETRY_NOT_Z_AWARE - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040234) The geometry is not Z-aware.

E_GEOMETRY_NOT_Z_SIMPLE - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040244) The geometry has undefined Z values for some of its vertices.

E_GEOMETRY_NOTSIMPLE - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040218) The operation cannot be performed on a non-simple geometry.

E_GEOMETRY_NULL - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004021d) A null geometry does not correspond to any ESRI geometry type.

E_GEOMETRY_OPERATION_CANCELLED - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040263) The geometry operation was cancelled.

E_GEOMETRY_OUT_OF_BOUNDS - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040238) The coordinates of this geometry are out of bounds.

E_GEOMETRY_OUTOFMEMORY - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004023c) There is not enough memory.

E_GEOMETRY_PARAMETER_TOO_SMALL - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004026e) An input parameter is too small.

E_GEOMETRY_PART_ZS_ARE_NAN - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004025e) A polygon part has no defined zs.

E_GEOMETRY_PARTNOTFOUND - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040217) The part could not be found in the geometry.

E_GEOMETRY_PROJECTDATUM - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004022e) The project method cannot do a datum transformation directly on segments.

E_GEOMETRY_RELATIONSYNTAXERROR - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004023d) The relation expression string has a syntax error.

E_GEOMETRY_ROTATEENVELOPE - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040208) Envelopes cannot be rotated.

E_GEOMETRY_SEGMENTGRAPH_CANTLOAD - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040236) A SegmentGraph can only organize polyline and polygon objects.

E_GEOMETRY_SEGMENTGRAPH_CONSTRUCTERROR - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040237) The geometries could not be topologically structured.

E_GEOMETRY_SIMPLIFYFAILED - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004022c) Something went wrong in Polygon/Polyline simplification.

E_GEOMETRY_SR_M_MISMATCH - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004025a) The geometry is m-aware, but its spatial reference has no m domain or resolution defined.

E_GEOMETRY_SR_Z_MISMATCH - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040259) The geometry is z-aware, but its spatial reference has no z domain or resolution defined.

E_GEOMETRY_TOLERANCE_TOO_LARGE_FOR_EXTENT - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040268) The xy cluster tolerance was too large for the extent of the data.

E_GEOMETRY_TOOMANYPOINTS - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004023a) This operation produced too many points.

E_GEOMETRY_TRANSFORMATION_UNDEFINED - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040258) The transformation is undefined.

E_GEOMETRY_TRANSFORMENVELOPE - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040209) Envelopes cannot have arbitrary transformations applied to them.

E_GEOMETRY_UNDEFINED_SPATIAL_REFERENCE - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040227) The operation requires the presence of a spatial reference.

E_GEOMETRY_UNDEFINEDRING - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004024a) The multipatch contains a ring that is invalid or has an undefined type.

E_GEOMETRY_UNDERCONSTRAINED - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004020c) The parameters to a geometric construction did not provide enough information to complete the construction.

E_GEOMETRY_UNIT_CONVERSION - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040261) Cannot convert between linear and angular units.

E_GEOMETRY_UNKNOWNERROR - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004023e) An unknown error has occurred in the geometry system.

E_GEOMETRY_UNKNOWNTYPE - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004020b) The GeometryEnvironment did not know how to create a geometry of the specified type.

E_GEOMETRY_WKT_TOO_LONG - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004026d) The WKT(Z) parameter is too long.

E_GEOMETRY_WRONG_RELATION_AND_TYPE - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040265) The specified combination of relation and geometry types is not valid.

E_GEOMETRY_WRONGTYPE - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004020a) The geometry parameter was of the wrong type for the method.

E_GEOMETRY_Z_OUT_OF_BOUNDS - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x80040270) The z coordinates of this geometry are out of bounds.

E_GEOMETRY_ZM_OUT_OF_BOUNDS - Static variable in interface com.esri.arcgis.geometry.esriGeometryError

(0x8004026f) The z or m coordinates of this geometry are out of bounds.

ArcEngine开发各种几何错误代码的更多相关文章

  1. Arcengine 开发，FeatureClass新增feature时“The Geometry has no z-value”或"The Geometry has null z-value"的解决方案

    Arcengine 开发,当图层含有Z值时,新增的feature没有Z值就会 出现“The Geometry has no z-value”的错误.意思很明显,新增的geometry没有Z值. 此时按 ...

  2. ArcEngine开发中“错误类型"****"未定义构造函数”

    from:http://blog.csdn.net/mengdong_zy/article/details/8990593 问题 在ArcEngine开发的时候,在编译时,发现出现这样的错误,出错的地 ...

  3. ArcEngine开发遇到的问题（转）

    ArcEngine开发遇到的问题 https://blog.csdn.net/u013751758/article/category/6971559 转载 2018年02月11日 17:28:11 1 ...

  4. arcengine 开发经典帖 【强烈推荐仔细研读】

    转自原文 arcengine 开发经典帖 使用ArcGIS Engine 开发自定义GIS应用: 第一部分:使用ArcGIS Engine 发布自定义GIS应用软件-全面了解ArcGIS Engine ...

  5. 利用ArcEngine开发地图发布服务，将mxd文档一键发布成wmts，并根据需要对地图进行空间查询，返回客户端geojson

    一直想开发一个软件取代ArcGIS Server,该软件使用ArcEngine开发,以Windows Service形式发布,部署在服务端上,解决wmts地图服务发布和空间查询的问题,经过不断的研究. ...

  6. arcengine 开发经典帖

    http://bbs.esrichina-bj.cn/ESRI/viewthread.php?tid=25575&page=1&extra= 使用ArcGIS Engine 开发自定义 ...

  7. ArcEngine开发中StartEditing和StartEditOperation的区别

    背景: 最近在开发一个管道数据维护系统的新增模块,牵涉到将这个模块的数据编辑统一到整个系统的编辑处理框架内的问题:即这个系统的所有对数据产生的编辑都需要处在整个系统唯一的开始.保存.回滚编辑的入口内. ...

  8. ArcEngine开发_添加字段，数据删除，插入，更新细节

    一.AE 向已存在的要素类中添加字段 链接:  AE 向已存在的要素类中添加字段 在向已存在的要素类中添加字段的时候,需要用到ICLASS接口.于是,进一步的调整代码如下,问题得以解决 static ...

  9. arcEngine开发之查询的相关接口

    属性查询 IQueryDef 首先这个接口不能直接创建,可以由 IFeatureWorkspace 接口的CreateQueryDef创建. 这个接口有两个属性必须设置(帮助文档是这样说明的,但是实际 ...

随机推荐

  1. oracle复杂查询是sql

    一.over()分析函数 分组查前几条:select * from test t where (select count(*) from test a where t.type=a.type and ...

  2. Codeforces Beta Round #37 C. Old Berland Language 暴力 dfs

    C. Old Berland Language 题目连接: http://www.codeforces.com/contest/37/problem/C Description Berland sci ...

  3. nginx 注册为linux系统服务

    #! /bin/sh # chkconfig: - 85 15 # description: nginx is a World Wide Web server. It is used to serve ...

  4. 从零开始搭建linux下laravel 5.5所需环境（一）

    首先你需要有一台linux服务器,或者虚拟机,这里就不赘述了,不会的可以自行百度. 我这里准备的是一台腾讯云服务器,系统为CentOS 7.4 64位. 你可以使用腾讯云的登录按钮登录到服务器,也可以 ...

  5. 使用LibZ合并.Net程序集，支持WPF

    最近写了一个小的WPF程序,发布的时候发现依赖着两三个20~30k的小dll的,感觉有点不爽,就想把它合并一下.以前在WinForm下用过微软的ILMerge合并程序集,不过记得它对WPF程序支持不大 ...

  6. Window 8 启用 Telnet 命令工具一览图

    Window 8 启用 Telnet 命令工具一览图 太阳火神的漂亮人生 (http://blog.csdn.net/opengl_es) 本文遵循"署名-非商业用途-保持一致"创 ...

  7. 撤销正在审核的app

    一个app还未通过审核,但是新版本已经出来了,怎样才能撤销正在审核的app呢? 方法:在 是binary deatils里用 reject this binary.之后,即可以重新上传代码了.

  8. Pycharm配置autopep8让Python代码更符合pep8规范

    一.何为pep8? PEP 8官方文档 -- Style Guide for Python Code PEP8中文翻译(转) 二.Pycharm中配置pep8 Pycharm本身是有pep8风格检测的 ...

  9. 【spring boot】spring boot后台时间正确，返回给前台的时间不正确，和后台差8个小时

    后台打印的时间如下: 数据库存储时间如下: 接口返回给前台的时间如下: 相差8个小时. 原因如下: spring-boot中对于@RestController或者@Controller+@Respon ...

  10. linux内核编译指定工具连

    make modules CROSS_COMPILE=arm-linux-