--- rk3399/3288 系列平台接mipi 的dts 数据 panel-init-sequence = [] 命令的整法

https://blog.csdn.net/Shushan1/article/details/87858434

mipi 屏的数据手册

dts sample:

&dsi {
        status = "okay";

        rockchip,lane-rate = <>; 

        panel@ {
            compatible ="simple-panel-dsi";
            reg = <>;
            backlight = <&backlight>;
            enable-gpios = <&gpio1  GPIO_ACTIVE_HIGH>;
            enable-delay-ms = <>;
            prepare-delay-ms = <>;
            reset-gpios = <&gpio4  GPIO_ACTIVE_HIGH>;
            reset-delay-ms = <>;
            init-delay-ms = <>;

            dsi,flags = <(MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
                        MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_EOT_PACKET)>;
            dsi,format = <MIPI_DSI_FMT_RGB888>;
            dsi,lanes = <>;
            status = "okay";

            panel-init-sequence = [
                    0A
                   B3 0A 7F
                   B4
                   B5 4C
                   B6   0F   9F 9F
                   C0  0A
                 0A  C2 6E
                  0D C3
                   C4     6D
                  0A D0
                  0A D1
                  0A D2
                  0A D3
                  0A D4
                  0A D5         

                    ];

            display-timings {
                native-mode = <&timing0>;

                timing0: timing0 {
                    clock-frequency = <>;
                    hactive = <>;
                    vactive = <>;
                    hback-porch = <>;
                    hfront-porch = <>;
                    vback-porch = <>;
                    vfront-porch = <>;
                    hsync-len = <>;
                    vsync-len = <>;
                    hsync-active = <>;
                    vsync-active = <>;
                    de-active = <>;
                    pixelclk-active = <>;
                };
            };
        };
}

前面三个字节分别表示命令 类型( 0x05/0x15/0x39.)、 延时,  命令净荷长度,

从第四个字节开始表示命令的有效 payload

其中:
0x05命令类型是带1个参数,如:
0x15命令类型是带2个参数,如
0x39命令类型是带多个参数,即大于两个参数,如