Turtlebot3入门教程-系统-SBC软件设置（ubuntu20.04）

本文针对如何在树莓派3上安装ubuntu20.04系统和软件进行讲解

树莓派3接上显示屏和鼠标后，开机后继续安装软件包

详细步骤如下：

（1）系统安装

（2）ROS安装

（3）TurboBot3依赖的ROS包安装

安装turtlebot3依赖：

sudo apt-get install ros-noetic-joy  ros-noetic-teleop-twist-keyboard ros-noetic-laser-proc ros-noetic-rgbd-launch ros-noetic-amcl ros-noetic-map-server ros-noetic-move-base ros-noetic-urdf ros-noetic-xacro ros-noetic-compressed-image-transport ros-noetic-rqt-image-view  ros-noetic-navigation

 

需要源码安装的依赖

cd ~/pkg_ws/src

git clone -b melodic-devel https://github.com/ros-teleop/teleop_twist_joy

git clone -b melodic-devel https://github.com/ros-perception/depthimage_to_laserscan

git clone -b noetic-devel https://github.com/ros-drivers/rosserial

git clone -b melodic-devel https://github.com/ros-perception/slam_gmapping

git clone -b melodic-devel https://github.com/ros-perception/openslam_gmapping

cd ~/pkg_ws && catkin_make

 

安装turtlebot3

cd ~/tb3_ws/src

git clone https://github.com/ROBOTIS-GIT/hls_lfcd_lds_driver.git

git clone https://github.com/ROBOTIS-GIT/turtlebot3_msgs.git

git clone https://github.com/ROBOTIS-GIT/turtlebot3.git

cd ~/tb3_ws&& catkin_make

如果catkin_make完成没有任何错误，安装完成。

 

USB设置(以下允许将USB端口用于没有root权限的OpenCR板)

cd ~/catkin_ws/src/turtlebot3/turtlebot3_bringup

sudo cp ./99-turtlebot3-cdc.rules /etc/udev/rules.d/

sudo udevadm control --reload-rules

sudo udevadm trigger