以下是微软官方提供的CRM端口号列表，收藏一下：

4.0 ：https://msdn.microsoft.com/en-us/library/dd979226(v=crm.6).aspx

This section describes the ports that are used for Microsoft Dynamics CRM. This information is useful and helpful as you configure the network when users connect through a firewall.

Network ports for the Microsoft Dynamics CRM Web application

The following table lists the ports used for a server that is running a full-server installation of Microsoft Dynamics CRM. Moreover, except for the Microsoft SQL Server role, and the Microsoft Dynamics CRM Connector for SQL Server Reporting Services server role, all server roles are installed on the same computer.

Protocol

Port

Description

Explanation

TCP

80

HTTP

Default Web application port. This port may be different as it can be changed during Microsoft Dynamics CRM Setup. For new Web sites, the default port number is 5555.

TCP

135

MSRPC

RPC endpoint resolution.

TCP

139

NETBIOS-SSN

NETBIOS session service.

TCP

443

HTTPS

Default secure HTTP port. The port number may differ from the default port. This secure network transport must be manually configured. Although this port is not required to run Microsoft Dynamics CRM, we strongly recommend it. For information about how to configure HTTPS for Microsoft Dynamics CRM, see MakeMicrosoft Dynamics CRM 4.0client-to-server network communications more secure.

TCP

445

Microsoft-DS

Active Directory service required for Active Directory access and authentication.

UDP

123

NTP

Network Time Protocol.

UDP

137

NETBIOS-NS

NETBIOS name service.

UDP

138

NETBIOS-dgm

NETBIOS datagram service.

UDP

445

Microsoft-DS

Active Directory service required for Active Directory access and authentication.

UDP

1025

Blackjack

DCOM, used as an RPC listener

Network ports that are used by the SQL Server that runs the Microsoft Dynamics CRM Connector for SQL Server Reporting Services server roles

The following table lists the ports that are used for a computer that is running SQL Server and has only SQL Server and the Microsoft Dynamics CRM Connector for SQL Server Reporting Services server roles installed.

Protocol

Port

Description

Explanation

TCP

135

MSRPC

RPC endpoint resolution.

TCP

139

NETBIOS-SSN

NETBIOS session service.

TCP

445

Microsoft-DS

Active Directory required for Active Directory access and authentication.

TCP

1433

ms-sql-s

SQL Server sockets service. This port is required for access to SQL Server. Note that, this number may be different if you have configured your SQL Server to use a different port number.

UDP

123

NTP

Network Time Protocol.

UDP

137

NETBIOS-NS

NETBIOS name service.

UDP

138

NETBIOS-dgm

NETBIOS datagram service.

UDP

445

Microsoft-DS

Active Directory directory service required for Active Directory access and authentication.

UDP

1025

Blackjack

DCOM, used as an RPC listener

2011：https://technet.microsoft.com/en-us/library/hh699823(v=crm.5).aspx

This section describes the ports that are used for Microsoft Dynamics CRM. This information is helpful as you configure the network when users connect through a firewall.

In This Topic

Network ports for the Microsoft Dynamics CRM Web application

The following table lists the ports used for a server that is running a Full Server installation of Microsoft Dynamics CRM. Moreover, except for the Microsoft SQL Server role, and the Microsoft Dynamics CRM Connector for SQL Server Reporting Services server role, all server roles are installed on the same computer.

Protocol Port Description Explanation

TCP

80

HTTP

Default Web application port. This port may be different as it can be changed during Microsoft Dynamics CRM Server Setup. For new Web sites, the default port number is 5555.

TCP

135

MSRPC

RPC endpoint resolution.

TCP

139

NETBIOS-SSN

NETBIOS session service.

TCP

443

HTTPS

Default secure HTTP port. The port number may differ from the default port. This secure network transport must be manually configured. Although this port is not required to run Microsoft Dynamics CRM, we strongly recommend it. For information about how to configure HTTPS for Microsoft Dynamics CRM, see “Make Microsoft Dynamics CRM client-to-server network communications more secure” in Microsoft Dynamics CRM 2011 Post-Installation and Configuration Guidelines in the Installing Guide.

TCP

445

Microsoft-DS

Active Directory service required for Active Directory access and authentication.

UDP

123

NTP

Network Time Protocol.

UDP

137

NETBIOS-NS

NETBIOS name service.

UDP

138

NETBIOS-dgm

NETBIOS datagram service.

UDP

445

Microsoft-DS

Active Directory service required for Active Directory access and authentication.

UDP

1025

Blackjack

DCOM, used as an RPC listener.
Important
Depending on your domain trust configuration, additional network ports may need to be available for Microsoft Dynamics CRM to work correctly. For more information, see How to configure a firewall for domains and trusts.

Network ports for the Asynchronous Service, Web Application Server, and Sandbox Processing Service server roles

The following table lists the additional ports that are used for a deployment where the Sandbox Processing Service is running on a separate computer.

Protocol Port Description Explanation

TCP

808

CRM server role communication

The Asynchronous Service and Web Application Server services communicate to the Sandbox Processing Service through this channel. The default port is 808, but can be changed in the Windows registry by adding the DWORD registry value TcpPort in the key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSCRM\.

Network ports that are used by the SQL Server that runs the Microsoft Dynamics CRM Reporting Extensions server roles

The following table lists the ports that are used for a computer that is running SQL Server and has only SQL Server and the Microsoft Dynamics CRM Reporting Extensions server roles installed.

Protocol Port Description Explanation

TCP

135

MSRPC

RPC endpoint resolution.

TCP

139

NETBIOS-SSN

NETBIOS session service.

TCP

445

Microsoft-DS

Active Directory service required for Active Directory access and authentication.

TCP

1433

ms-sql-s

SQL Server sockets service. This port is required for access to SQL Server.This number may be different if you have configured your default instance of SQL Server to use a different port number or you are using a named instance.

UDP

123

NTP

Network Time Protocol.

UDP

137

NETBIOS-NS

NETBIOS name service.

UDP

138

NETBIOS-dgm

NETBIOS datagram service.

UDP

445

Microsoft-DS

Active Directory service required for Active Directory access and authentication.

UDP

1025

Blackjack

DCOM, used as an RPC listener.

2013：https://technet.microsoft.com/en-us/library/hh699823(v=crm.6).aspx

This section describes the ports that are used for Microsoft Dynamics CRM. This information is helpful as you configure the network when users connect through a firewall.

Network ports for the Microsoft Dynamics CRM web application

The following table lists the ports used for a server that is running a Full Server installation of Microsoft Dynamics CRM. Moreover, except for the Microsoft SQL Server role, and the Microsoft Dynamics CRM Reporting Extensions server role, all server roles are installed on the same computer.

Protocol Port Description Explanation

TCP

80

HTTP

Default web application port. This port may be different as it can be changed during Microsoft Dynamics CRM Server Setup. For new websites, the default port number is 5555.

TCP

135

MSRPC

RPC endpoint resolution.

TCP

139

NETBIOS-SSN

NETBIOS session service.

TCP

443

HTTPS

Default secure HTTP port. The port number may differ from the default port. This secure network transport must be manually configured. Although this port is not required to run Microsoft Dynamics CRM, we strongly recommend it. For information about how to configure HTTPS for CRM, see “Make Microsoft Dynamics CRM client-to-server network communications more secure” in Post-Installation and Configuration Guidelines in the Installing Guide.

TCP

445

Microsoft-DS

Active Directory service required for Active Directory access and authentication.

UDP

123

NTP

Network Time Protocol.

UDP

137

NETBIOS-NS

NETBIOS name service.

UDP

138

NETBIOS-dgm

NETBIOS datagram service.

UDP

445

Microsoft-DS

Active Directory service required for Active Directory access and authentication.

UDP

1025

Blackjack

DCOM, used as an RPC listener.
Important
Depending on your domain trust configuration, additional network ports may need to be available for Microsoft Dynamics CRM to work correctly. More information: How to configure a firewall for domains and trusts

Network ports for the Asynchronous Service, Web Application Server, and Sandbox Processing Service server roles

The following table lists the additional ports that are used for a deployment where the Sandbox Processing Service is running on a separate computer.

Protocol Port Description Explanation

TCP

808

CRM server role communication

The Asynchronous Service and Web Application Server services communicate to the Sandbox Processing Service through this channel. The default port is 808, but can be changed in the Windows registry by adding the DWORD registry value TcpPort in the key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSCRM\.

Network ports for the Deployment Web Service server role

The following table lists the additional port that is used by the Deployment Web Service server role.

Protocol Port Description Explanation

TCP

808

Used for Fetch-based reports

Client computers that are running Fetch-based reports communicate over this port when communicating with the computer that is running the Deployment Web Service server role.

Network ports that are used by the SQL Server that runs the SQL Server and Microsoft Dynamics CRM Reporting Extensions server roles

The following table lists the ports that are used for a computer that is running SQL Server and has only SQL Server and the Microsoft Dynamics CRM Reporting Extensions (SRS Data Connector) server roles installed.

Protocol Port Description Explanation

TCP

135

MSRPC

RPC endpoint resolution.

TCP

139

NETBIOS-SSN

NETBIOS session service.

TCP

445

Microsoft-DS

Active Directory service required for Active Directory access and authentication.

TCP

1433

ms-sql-s

SQL Server sockets service. This port is required for access to SQL Server. This number may be different if you have configured your default instance of SQL Server to use a different port number or you are using a named instance.

UDP

123

NTP

Network Time Protocol.

UDP

137

NETBIOS-NS

NETBIOS name service.

UDP

138

NETBIOS-dgm

NETBIOS datagram service.

UDP

445

Microsoft-DS

Active Directory service required for Active Directory access and authentication.

UDP

1025

Blackjack

DCOM, used as an RPC listener.
Important
In addition to the ports listed previously, UDP port 1434 (SQL Server Browser Service) on the SQL Server is required by Microsoft Dynamics CRM Server Setup to return a list of the computers that are running SQL Server during the installation of Microsoft Dynamics CRM Server. To work around this, specify the SQLServer\InstanceName during Setup.

 
 
 

This section describes the ports that are used for Microsoft Dynamics CRM. This information is helpful as you configure the network when users connect through a firewall.

Network ports for the Microsoft Dynamics CRM web application

The following table lists the ports used for a server that is running a Full Server installation of Microsoft Dynamics CRM. Moreover, except for the Microsoft SQL Server role, and the Microsoft Dynamics CRM Reporting Extensions server role, all server roles are installed on the same computer.

Protocol Port Description Explanation

TCP

80

HTTP

Default web application port. This port may be different as it can be changed during Microsoft Dynamics CRM Server Setup. For new websites, the default port number is 5555.

TCP

135

MSRPC

RPC endpoint resolution.

TCP

139

NETBIOS-SSN

NETBIOS session service.

TCP

443

HTTPS

Default secure HTTP port. The port number may differ from the default port. This secure network transport must be manually configured. Although this port is not required to run Microsoft Dynamics CRM, we strongly recommend it. For information about how to configure HTTPS for CRM, see “Make Microsoft Dynamics CRM client-to-server network communications more secure” in Post-installation and configuration guidelines for Microsoft Dynamics CRM in the Installing Guide.

TCP

445

Microsoft-DS

Active Directory service required for Active Directory access and authentication.

UDP

123

NTP

Network Time Protocol.

UDP

137

NETBIOS-NS

NETBIOS name service.

UDP

138

NETBIOS-dgm

NETBIOS datagram service.

UDP

445

Microsoft-DS

Active Directory service required for Active Directory access and authentication.

UDP

1025

Blackjack

DCOM, used as an RPC listener.
Important
Depending on your domain trust configuration, additional network ports may need to be available for Microsoft Dynamics CRM to work correctly. More information: How to configure a firewall for domains and trusts

Network ports for the Asynchronous Service, Web Application Server, and Sandbox Processing Service server roles

The following table lists the additional ports that are used for a deployment where the Sandbox Processing Service is running on a separate computer.

Protocol Port Description Explanation

TCP

808

CRM server role communication

The Asynchronous Service and Web Application Server services communicate to the Sandbox Processing Service through this channel. The default port is 808, but can be changed in the Windows registry by adding the DWORD registry value TcpPort in the key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSCRM\.

Network ports for the Deployment Web Service server role

The following table lists the additional port that is used by the Deployment Web Service server role.

Protocol Port Description Explanation

TCP

808

Used for Fetch-based reports

Client computers that are running Fetch-based reports communicate over this port when communicating with the computer that is running the Deployment Web Service server role.

Network ports that are used by the SQL Server that runs the SQL Server and Microsoft Dynamics CRM Reporting Extensions server roles

The following table lists the ports that are used for a computer that is running SQL Server and has only SQL Server and the Microsoft Dynamics CRM Reporting Extensions (SRS Data Connector) server roles installed.

Protocol Port Description Explanation

TCP

135

MSRPC

RPC endpoint resolution.

TCP

139

NETBIOS-SSN

NETBIOS session service.

TCP

445

Microsoft-DS

Active Directory service required for Active Directory access and authentication.

TCP

1433

ms-sql-s

SQL Server sockets service. This port is required for access to SQL Server. This number may be different if you have configured your default instance of SQL Server to use a different port number or you are using a named instance.

UDP

123

NTP

Network Time Protocol.

UDP

137

NETBIOS-NS

NETBIOS name service.

UDP

138

NETBIOS-dgm

NETBIOS datagram service.

UDP

445

Microsoft-DS

Active Directory service required for Active Directory access and authentication.

UDP

1025

Blackjack

DCOM, used as an RPC listener.
Important
In addition to the ports listed previously, UDP port 1434 (SQL Server Browser Service) on the SQL Server is required by Microsoft Dynamics CRM Server Setup to return a list of the computers that are running SQL Server during the installation of Microsoft Dynamics CRM Server. To work around this, specify the SQLServer\InstanceName during Setup.

各版本CRM所需端口号的更多相关文章

  1. Dynamics 365 for CRM：CRM与ADFS安装到同一台服务器，需修改ADFS服务端口号

    CRM与ADFS安装到同一台服务器时,出现PluginRegistrationTool 及 CRM Outlook Client连接不上,需要修改ADFS的服务端口号,由默认的808修改为809: P ...

  2. 查看mysql的版本和端口号

    查看版本:select version(); 查看端口号:show global variables like 'port';

  3. 同一服务器上多个版本的 sqlserver　，如何连接，改变某一实例的端口号

    1. SQL Server配置管理器,双击“TCP/IP” 2. TCP/IP设置 确定后重启SQL Server服务,打开SQL Server Management Studio,服务器名称输入12 ...

  4. Jenkins 2.x版本修改启动端口号（Windows）

    可能有一些原因,8080端口被占用了,无法使用时需要修改jenkins的启动端口号. 如果首次安装,建议先停止原有系统的8080端口占用,等jenkins安装完成后,再进行修改,然后该回8080的原系 ...

  5. C# 获取随机可用端口号

    TCP与UDP段结构中端口地址都是16比特,可以有在0---65535范围内的端口号.对于这65536个端口号有以下的使用规定: (1)端口号小于256的定义为常用端口,服务器一般都是通过常用端口号来 ...

  6. C#随机取得可用端口号

    TCP与UDP段结构中端口地址都是16比特,可以有在0---65535范围内的端口号.对于这65536个端口号有以下的使用规定: (1)端口号小于256的定义为常用端口,服务器一般都是通过常用端口号来 ...

  7. windows下安装mysql数据库修改端口号

    Window版本 卸载原本的mysql sc delete MySQL //删除mysql 1.下载 1 2 3 MySQL   https://dev.mysql.com/downloads/ins ...

  8. 团队项目系列博客 —— 在路上（之wampserver 修改根目录以及配置多站点以及修改端口号）

    团队项目系列博客 -- 在路上(之wampserver 修改根目录以及配置多站点以及修改端口号) 标签(空格分隔): wampserver php 参考:参考文献1.慕课网.知乎.github 一.w ...

  9. [C#]使用 C# 代码实现拓扑排序 dotNet Core WEB程序使用 Nginx反向代理 C#里面获得应用程序的当前路径 关于Nginx设置端口号，在Asp.net 获取不到的，解决办法 .Net程序员 初学Ubuntu ，配置Nignix 夜深了，写了个JQuery的省市区三级级联效果

    [C#]使用 C# 代码实现拓扑排序   目录 0.参考资料 1.介绍 2.原理 3.实现 4.深度优先搜索实现 回到顶部 0.参考资料 尊重他人的劳动成果,贴上参考的资料地址,本文仅作学习记录之用. ...

随机推荐

  1. 用openvswitch配置跨节点的docker网络环境

    在一篇随笔中,我们已经尝试了在不依赖工具的情况下设置docker的ip,连我都想吐槽,MD单机都这么麻烦,在多机的环境中岂不是要了我的小命! 本文就是为了多机环境中各个节点的容器通信而做的,网络拓朴如 ...

  2. 查看regulator的信息

    例如,查看ldo6 /sys/devices/soc.0/qcom,rpm-smd.35/rpm-regulator-ldoa6.85/regulator-l6.110/regulator/regul ...

  3. wcf序列化大对象时报错：读取 XML 数据时，超出最大

    错误为: 访问服务异常:格式化程序尝试对消息反序列化时引发异常: 尝试对参数 http://tempuri.org/ 进行反序列化时出 错: request.InnerException 消息是“反序 ...

  4. AS3 从外部SWF中获取资源的方法（ApplicationDomain的使用）

    package { import flash.display.Bitmap; import flash.display.BitmapData; import flash.display.Loader; ...

  5. VC++6.0 配置CppUTest测试环境

    最近看<软件项目成功之道>,书中无数次提及到“单元测试”对于项目成败的重要性,看到同事将CppUTest用于Linux动态库测试,于是在VC++6.0环境下搭建一个基于CppUTest的单 ...

  6. Ibatis.net总是报：【ExecuteStoreCommand SqlParameterCollection 中已包含 SqlParameter】（转）

    今天很奇怪调用EF的ExecuteStoreCommand 出现了个这样的错误,怎么也调试不过,痛定思痛 原来 command被连着调用了而没有销毁掉   public static DataTabl ...

  7. 在SQL2008配置数据库镜像1418错误的处理

    在SQL2008配置数据库镜像错误一般都由以下原因造成 1.主体.镜像服务器SQL SERVER选择本账号切保持一致 2.在数据库镜像配置向导中的“服务账号”选项中请选择需要同步数据库的登陆名,例如数 ...

  8. QTP操作excel文档

    对于QTP操作excel的大前提是,保证组建服务里的DCOM配置里存在 microsoft excel application ,具体的查看方式是,在运行框中输入dcomcnfg,然后会打开组件服务的 ...

  9. matlab函数_连通区域

    1. matlab函数bwareaopen──删除小面积对象格式:BW2 = bwareaopen(BW,P,conn)作用:删除二值图像BW中面积小于P的对象,默认情况下使用8邻域.算法:(1)De ...

  10. linux shell 常用表达式汇总

    1. linux shell 逻辑运算符.逻辑表达式详解: http://www.cnblogs.com/chengmo/archive/2010/10/01/1839942.html