$ ./config.sh
Unable to instantiate GUI, defaulting to console mode.

<------------------- Fusion Middleware Configuration Wizard ------------------>

Welcome:
--------

Choose between creating and extending a domain. Based on your selection,
the Configuration Wizard guides you through the steps to generate a new or
extend an existing domain.

->1|Create a new WebLogic domain
    |    Create a WebLogic domain in your projects directory.

2|Extend an existing WebLogic domain
    |    Use this option to add new components to an existing domain and modify     |configuration settings.

Enter index number to select OR [Exit][Next]>

<------------------- Fusion Middleware Configuration Wizard ------------------>

Select Domain Source:
---------------------

Select the source from which the domain will be created. You can create the
domain by selecting from the required components or by selecting from a
list of existing domain templates.

->1|Choose Weblogic Platform components
    |    You can choose the Weblogic component(s) that you want supported in
    |your domain.

2|Choose custom template
    |    Choose this option if you want to use an existing  template. This
    |could be a custom created template using the Template Builder.

Enter index number to select OR [Exit][Previous][Next]>

<------------------- Fusion Middleware Configuration Wizard ------------------>

Application Template Selection:
-------------------------------

Available Templates
    |_____Basic WebLogic Server Domain - 10.3.6.0 [wlserver_10.3]x
    |_____Basic WebLogic SIP Server Domain - 10.3.6.0 [wlserver_10.3] [2]
    |_____WebLogic Advanced Web Services for JAX-RPC Extension - 10.3.6.0 [wlserver_10.3] [3]
    |_____WebLogic Advanced Web Services for JAX-WS Extension - 10.3.6.0 [wlserver_10.3] [4]

Enter number exactly as it appears in brackets to toggle selection OR [Exit][Previous][Next]>

<------------------- Fusion Middleware Configuration Wizard ------------------>

Edit Domain Information:
------------------------

|  Name  |    Value    |
   _|________|_____________|
   1| *Name: | base_domain |

Enter value for "Name" OR [Exit][Previous][Next]> fasp_domain8001

<------------------- Fusion Middleware Configuration Wizard ------------------>

Edit Domain Information:
------------------------

|  Name  |      Value      |
   _|________|_________________|
   1| *Name: | fasp_domain8001 |

Use above value or select another option:
    1 - Modify "Name"
    2 - Discard Changes

Enter option number to select OR [Exit][Previous][Next]> 1

<------------------- Fusion Middleware Configuration Wizard ------------------>

Edit Domain Information:
------------------------

|  Name  |      Value      |
   _|________|_________________|
   1| *Name: | fasp_domain8001 |

Enter value for "Name" OR [Exit][Previous][Next]>

<------------------- Fusion Middleware Configuration Wizard ------------------>

Select the target domain directory for this domain:
---------------------------------------------------

"Target Location" = [Enter new value or use default
"/weblogic/Oracle/middleware/user_projects/domains"]

Enter new Target Location OR [Exit][Previous][Next]>

<------------------- Fusion Middleware Configuration Wizard ------------------>

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the
default administrator used to start development mode servers.

|          Name           |                  Value                  |
   _|_________________________|_________________________________________|
   1|         *Name:          |                weblogic                 |
   2|     *User password:     |                                         |
   3| *Confirm user password: |                                         |
   4|      Description:       | This user is the default administrator. |

Use above value or select another option:
    1 - Modify "Name"
    2 - Modify "User password"
    3 - Modify "Confirm user password"
    4 - Modify "Description"

Enter option number to select OR [Exit][Previous][Next]> 2

<------------------- Fusion Middleware Configuration Wizard ------------------>

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the
default administrator used to start development mode servers.

"*User password:" = []

Enter new *User password: OR [Exit][Reset][Accept]> weblogic1

<------------------- Fusion Middleware Configuration Wizard ------------------>

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the
default administrator used to start development mode servers.

|          Name           |                  Value                  |
   _|_________________________|_________________________________________|
   1|         *Name:          |                weblogic                 |
   2|     *User password:     |                *********                |
   3| *Confirm user password: |                                         |
   4|      Description:       | This user is the default administrator. |

Use above value or select another option:
    1 - Modify "Name"
    2 - Modify "User password"
    3 - Modify "Confirm user password"
    4 - Modify "Description"
    5 - Discard Changes

Enter option number to select OR [Exit][Previous][Next]> 3

<------------------- Fusion Middleware Configuration Wizard ------------------>

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the
default administrator used to start development mode servers.

"*Confirm user password:" = []

Enter new *Confirm user password: OR [Exit][Reset][Accept]> weblogic1

<------------------- Fusion Middleware Configuration Wizard ------------------>

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the
default administrator used to start development mode servers.

|          Name           |                  Value                  |
   _|_________________________|_________________________________________|
   1|         *Name:          |                weblogic                 |
   2|     *User password:     |                *********                |
   3| *Confirm user password: |                *********                |
   4|      Description:       | This user is the default administrator. |

Use above value or select another option:
    1 - Modify "Name"
    2 - Modify "User password"
    3 - Modify "Confirm user password"
    4 - Modify "Description"
    5 - Discard Changes

Enter option number to select OR [Exit][Previous][Next]>

<------------------- Fusion Middleware Configuration Wizard ------------------>

Domain Mode Configuration:
--------------------------

Enable Development or Production Mode for this domain.

->1|Development Mode

2|Production Mode

Enter index number to select OR [Exit][Previous][Next]>

<------------------- Fusion Middleware Configuration Wizard ------------------>

Java SDK Selection:
-------------------

->1|IBM SDK 1.6.0 @ /usr/java6
   2|Other Java SDK

Enter index number to select OR [Exit][Previous][Next]>

<------------------- Fusion Middleware Configuration Wizard ------------------>

Select Optional Configuration:
------------------------------

1|Administration Server [ ]
   2|Managed Servers, Clusters and Machines [ ]
   3|RDBMS Security Store [ ]

Enter index number to select OR [Exit][Previous][Next]> 1

<------------------- Fusion Middleware Configuration Wizard ------------------>

Select Optional Configuration:
------------------------------

1|Administration Server [x]
   2|Managed Servers, Clusters and Machines [ ]
   3|RDBMS Security Store [ ]

Enter index number to select OR [Exit][Previous][Next]>

<------------------- Fusion Middleware Configuration Wizard ------------------>

Configure the Administration Server:
------------------------------------

Each WebLogic Server domain must have one Administration Server. The
Administration Server is used to perform administrative tasks.

|       Name       |        Value        |
   _|__________________|_____________________|
   1|      *Name:      |     AdminServer     |
   2| *Listen address: | All Local Addresses |
   3|   Listen port:   |        7001         |
   4| SSL listen port: |         N/A         |
   5|   SSL enabled:   |        false        |

Use above value or select another option:
    1 - Modify "Name"
    2 - Modify "Listen address"
    3 - Modify "Listen port"
    4 - Modify "SSL enabled"

Enter option number to select OR [Exit][Previous][Next]> 1

<------------------- Fusion Middleware Configuration Wizard ------------------>

Configure the Administration Server:
------------------------------------

Each WebLogic Server domain must have one Administration Server. The
Administration Server is used to perform administrative tasks.

|       Name       |        Value        |
   _|__________________|_____________________|
   1|      *Name:      |     AdminServer     |
   2| *Listen address: | All Local Addresses |
   3|   Listen port:   |        7001         |
   4| SSL listen port: |         N/A         |
   5|   SSL enabled:   |        false        |

Enter value for "Name" OR [Exit][Previous][Next]> fasp_8001

<------------------- Fusion Middleware Configuration Wizard ------------------>

Configure the Administration Server:
------------------------------------

Each WebLogic Server domain must have one Administration Server. The
Administration Server is used to perform administrative tasks.

|       Name       |        Value        |
   _|__________________|_____________________|
   1|      *Name:      |      fasp_8001      |
   2| *Listen address: | All Local Addresses |
   3|   Listen port:   |        7001         |
   4| SSL listen port: |         N/A         |
   5|   SSL enabled:   |        false        |

Use above value or select another option:
    1 - Modify "Name"
    2 - Modify "Listen address"
    3 - Modify "Listen port"
    4 - Modify "SSL enabled"
    5 - Discard Changes

Enter option number to select OR [Exit][Previous][Next]> 3

<------------------- Fusion Middleware Configuration Wizard ------------------>

Configure the Administration Server:
------------------------------------

Each WebLogic Server domain must have one Administration Server. The
Administration Server is used to perform administrative tasks.

|       Name       |        Value        |
   _|__________________|_____________________|
   1|      *Name:      |      fasp_8001      |
   2| *Listen address: | All Local Addresses |
   3|   Listen port:   |        7001         |
   4| SSL listen port: |         N/A         |
   5|   SSL enabled:   |        false        |

Enter value for "Listen port" OR [Exit][Previous][Next]> 8001

<------------------- Fusion Middleware Configuration Wizard ------------------>

Configure the Administration Server:
------------------------------------

Each WebLogic Server domain must have one Administration Server. The
Administration Server is used to perform administrative tasks.

|       Name       |        Value        |
   _|__________________|_____________________|
   1|      *Name:      |      fasp_8001      |
   2| *Listen address: | All Local Addresses |
   3|   Listen port:   |        8001         |
   4| SSL listen port: |         N/A         |
   5|   SSL enabled:   |        false        |

Use above value or select another option:
    1 - Modify "Name"
    2 - Modify "Listen address"
    3 - Modify "Listen port"
    4 - Modify "SSL enabled"
    5 - Discard Changes

Enter option number to select OR [Exit][Previous][Next]>

<------------------- Fusion Middleware Configuration Wizard ------------------>

Creating Domain...

0%          25%          50%          75%          100%
[------------|------------|------------|------------]
[***************************************************]

**** Domain Created Successfully! ****

$

AIX 7命令行weblogic建域流水的更多相关文章

  1. netcore命令行部署|跨域问题

    1.在hosting中修改发布端口号,如遇见不识别IP则改成*再用命令行运行 { "server.url": "http://*:8089"} 3.给接口开外网 ...

  2. 通过MYSQL命令行直接建数据库

    因为同事要求,在进行MYSQLDUMP的导入库时,加一个日期标签, BUT,MYSQLDUMP的前提是数据库中要存在数据库名, 于是通过-e 参数执行命令. 这让我想起了前不久请教同事,如果AWK传变 ...

  3. mysql命令行查看建表语句

    命令如下: SHOW CREATE TABLE tbl_name 例子: mysql> SHOW CREATE TABLE t\G . row ************************* ...

  4. Windows Server 2016-Wbadmin命令行备份域控制器

    在上一章我们讲到Windows Server 2016-图形化备份域控制器的方法,本章我们聊聊如何通过命令行Wbadmin对域控制器进行备份.在Windows Server Active Direct ...

  5. Linux应用server搭建手冊—Weblogic服务域的创建与部署

         前一篇谈到了Weblogic的安装,接下来整理weblogic服务域的创建及项目的部署      一.webLogic服务域创建          使用root用户登录后使用命令:#su W ...

  6. WebLogic 12c Linux 命令行 静默安装

    CentOS 6.3安装配置Weblogic 10  http://www.linuxidc.com/Linux/2014-02/96918.htm Oracle WebLogic 11g 安装部署文 ...

  7. 转使用chrome命令行:disable-web-security 实现浏览器跨域

    注意chrome 48 版本后此方法就不能用了 推荐一个新方式来实现本地跨域调试线上资源,搜索chrome插件 Allow-Control-Allow-Origin: *.https://chrome ...

  8. Chrome 浏览器跨域和安全访问问题 使用 chrome的命令行标记:disable-web-security 参数联调线上数据

    做前端的,用Ajax获取数据,是常有的事情,同域下自然没问题了,如果是不同域获取数据,浏览器就有个同源策略的限制. 如图: Origin * is not allowed by Access-Cont ...

  9. 【AIX】采用vi语法编辑命令行

    AIX中不能像centos那样移动方向键上.下来查询历史键入的命令行记录 可以通过一条命令采用vim的语法编辑命令行,查询历史记录. # set -o vi 在命令行输入上述命令后就可以: ESC+k ...

随机推荐

  1. Dubbo -- 系统学习 笔记 -- 示例 -- 静态服务

    Dubbo -- 系统学习 笔记 -- 目录 示例 想完整的运行起来,请参见:快速启动,这里只列出各种场景的配置方式 静态服务 有时候希望人工管理服务提供者的上线和下线,此时需将注册中心标识为非动态管 ...

  2. Docker background

    什么是 Docker? Docker 提供了一个可以运行你的应用程序的封套(envelope),或者说容器.它原本是 dotCloud 启动的一个业余项目,并在前些时候开源了.它吸引了大量的关注和讨论 ...

  3. composer 更新指定包

    1)网上搜了大半天都不知道怎么更新 componser 包,update upgrade 命令根本不知道怎么用!! 2)其实用 require 命令就可以更新包(它会判断包存不存在,不存在就安装,存在 ...

  4. Explaining Delegates in C# - Part 7 (Asynchronous Callback - Way 4)

    This is the final part of the series that started with... Callback and Multicast delegatesOne more E ...

  5. 嵌入式ROOTFS transplantation

    作一个嵌入式Linux rootfs,并且实现 web 服务 1. 文件系统简介 •理论上说一个嵌入式设备如果内核能够运行起来,且不需要运行用户进程的话,是不需要文件系统的,文件系统简单的说就是一种目 ...

  6. 《C++标准程序库》笔记之三

    本篇博客笔记顺序大体按照<C++标准程序库(第1版)>各章节顺序编排. ---------------------------------------------------------- ...

  7. 在wepy里面使用redux

    wepy 框架本身是支持 Redux 的,我们在构建项目的时候,将 是否安装 Redux 选择 y 就好了,会自动安装依赖,运行项目后看官方给的 demo 确实是可以做到的,但是官方文档里却对这一块只 ...

  8. 保存对象时碰到的问题-列名 'Discriminator' 无效

    今天保存对象时碰到问题: {"列名 'Discriminator' 无效.\r\n列名 'Discriminator' 无效."}  百度了一下,百度找到的一个解决: http:/ ...

  9. open-falcon之HBS

    功能 处理agent心跳请求,并将agent信息(ip.hostname.agent_version.plugin_version)等信息入库(portal库) 为agent提供执行run api的白 ...

  10. Git学习之Git 暂存区

    ============================= 修改文件后是否可以直接提交 ============================ (1) 向文件中追加一行内容  $ echo &quo ...