[root@]# smartctl --all /dev/sda
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-3.10.0-957.1.3.el7.x86_64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

Smartctl open device: /dev/sda failed: DELL or MegaRaid controller, please try adding '-d megaraid,N'
您在 /var/spool/mail/root 中有新邮件
[root@]# smartctl --all /dev/sda -d megaraid,N
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-3.10.0-957.1.3.el7.x86_64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/sda: Unknown device type 'megaraid,N'
=======> VALID ARGUMENTS ARE: ata, scsi, nvme[,NSID], sat[,auto][,N][+TYPE], usbcypress[,X], usbjmicron[,p][,x][,N], usbprolific, usbsunplus, marvell, areca,N/E, 3ware,N, hpt,L/M/N, megaraid,N, aacraid,H,L,ID, cciss,N, auto, test <=======

Use smartctl -h to get a usage summary

[root@]# smartctl --all /dev/sda -d megaraid,1
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-3.10.0-957.1.3.el7.x86_64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST4000NM0295
Revision:             DT31
Compliance:           SPC-4
User Capacity:        4,000,787,030,016 bytes [4.00 TB]
Logical block size:   512 bytes
Formatted with type 2 protection
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500a6e471cf
Serial number:        ZC18D33J
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Wed Jan 30 09:57:47 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Disabled or Not Supported

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     34 C
Drive Trip Temperature:        60 C

Manufactured in week 37 of year 2018
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  92
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  173
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 2489504015
  Blocks received from initiator = 153743775
  Blocks read from cache and sent to initiator = 910904678
  Number of read and write commands whose size <= segment size = 24681636
  Number of read and write commands whose size > segment size = 33

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 2046.82
  number of minutes until next internal SMART test = 51

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   130201873        6         0  130201879          6       8009.468           0
write:         0        0         2         2          2       6781.538           0
verify: 2675483919       19         0  2675483938         19      44652.884           0

Non-medium error count:        3

SMART Self-test log
Num  Test              Status                 segment  LifeTime  LBA_first_err [SK ASC ASQ]
     Description                              number   (hours)
# 1  Reserved(7)       Completed                  64       3                 - [-   -    -]
# 2  Background short  Completed                  96       1                 - [-   -    -]

Long (extended) Self Test duration: 28041 seconds [467.4 minutes]

centos linux查看硬盘型号的更多相关文章

  1. Linux查看硬盘型号

    Linux查看硬盘型号 -- :: 分类: 服务器与存储 请先确定服务器是否有配 RAID. 如果有RAID,请通过对应的RAID管理(监控)工具查看,例如LSI的MegaCli: # /opt/Me ...

  2. linux查看主板型号、CPU、显卡、硬盘等信息

    系统 uname -a # 查看内核/操作系统/CPU信息 head -n 1 /etc/issue # 查看操作系统版本 cat /proc/cpuinfo # 查看CPU信息 hostname # ...

  3. linux查看主板型号及内存硬件信息,及硬盘测速

    查看主板型号: sudo  dmidecode |grep -A16 "System Information$" 内存槽及内存条: sudo  dmidecode |grep -A ...

  4. Linux 查看CPU型号,内存大小,硬盘空间的命令

    1 查看CPU 1.1 查看CPU个数 # cat /proc/cpuinfo | grep "physical id" | uniq | wc -l 1.2 查看CPU核数 # ...

  5. Linux查看硬盘使用时间等信息

    查看硬盘信息的很多命令,都需要root权限,如果普通用户无法看到信息,请切换至root: 1.查看硬盘使用时间等信息 硬盘使用时间很重要,硬盘理论寿命是3万小时以上 $ sudo smartctl - ...

  6. CentOS Linux 加硬盘,分区和设置自动挂载

    sda 表示第1块SCSI硬盘hda 表示第1块IDE硬盘(即连接在第1个IDE接口的Master口上)scd0 表示第1个USB光驱当添加了新硬盘后,在/dev目录下会有相应的设备文件产生.ccis ...

  7. linux 查看硬盘使用情况

    在windows系统中,我们可以很容易的查看磁盘的使用情况,在linux系统中,我们可以使用命令来查看磁盘使用情况. 1.df命令 作用:用来查看硬盘的挂载点,以及对应的硬盘容量信息.包括硬盘的总大小 ...

  8. linux查看硬盘信息

    1. 通过内核查看硬盘信息 cat /sys/block/sda/device/model cat /sys/block/sda/device/vendor 2. 用过hdparm命令查看 hdpar ...

  9. CentOS 7 查看硬盘情况

    用命令: lsblk                                  查看分区和磁盘 df -h                                        查看整 ...

随机推荐

  1. 深入理解Java虚拟机(笔记)

    内存分配: 为对象分配内存有两种方式,第一种是“指针碰撞”,也就是把内存分为两边,一边是已使用区域,另一边是未分配区域,分界线用指针记录,当要分配内存时,只需把指针向未分配区域移动需要的空间即可,通常 ...

  2. vue里的渲染以及computed的好处

    如果vue里的某个methods函数执行,导致页面重新渲染,那么所有页面渲染相关的methods函数会重新执行以及时的渲染页面 但是大量函数的重新没有必要的执行会导致性能的下降, 此时如果把没有必要再 ...

  3. vscode添加vue格式化插件

    1.安装Vetur插件 2.ctrl+,打开用户设置,找到"vetur.format.defaultFormatter.html": "none",

  4. thinkphp 多图片上传 单图片上传

    不管是单图片上传还是多图片上传都必须要引用这两个js 下载地址 链接:http://pan.baidu.com/s/1eStkUt0 密码:asvo <script src="Publ ...

  5. Linux 中如何用源代码安装软件,以及如何卸载它

    https://www.linuxidc.com/Linux/2017-12/149839.htm http://www.openssh.com/ http://www.openssh.com/por ...

  6. odoo配置文件内容详解

    odoo常用openerp-server.conf配置参数详解 参数 说明 用法 addons_path addons模块的查找路径,多个路径用逗号分隔 addons_path = E:\GreenO ...

  7. SQL[Err] ORA-00979: not a GROUP BY expression

    Oracle中group by用法 not a GROUP BY expression异常产生是因为group by用法的问题. 在使用group by 时,有一个规则需要遵守,即出现在select列 ...

  8. 快速构建一个使用axios的vue应用程序(转)

    英文原文:https://www.sitepoint.com/fetching-data-third-party-api-vue-axios/ 译文:https://segmentfault.com/ ...

  9. webpack的externals的使用

    externals 官网文档解释的很清楚,就是webpack可以不处理应用的某些依赖库,使用externals配置后,依旧可以在代码中通过CMD.AMD或者window/global全局的方式访问. ...

  10. PHP Echarts Ajax Json柱形图示例

    <?php $server = '127.0.0.1'; $user = 'root'; $password = ''; $database = 'yiibaidb'; $conn = new ...