头文件/usr/include/asm-generic/errno-base.h定义错误码:
#ifndef _ASM_GENERIC_ERRNO_BASE_H
#define _ASM_GENERIC_ERRNO_BASE_H #define EPERM 1 /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Argument list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#define EAGAIN 11 /* Try again */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */ #endif

头文件/usr/include/asm-generic/errno.h定义错误码:

#ifndef _ASM_GENERIC_ERRNO_H
#define _ASM_GENERIC_ERRNO_H #include <asm-generic/errno-base.h&gt #define EDEADLK 35 /* Resource deadlock would occur */
#define ENAMETOOLONG 36 /* File name too long */
#define ENOLCK 37 /* No record locks available */
#define ENOSYS 38 /* Function not implemented */
#define ENOTEMPTY 39 /* Directory not empty */
#define ELOOP 40 /* Too many symbolic links encountered */
#define EWOULDBLOCK EAGAIN /* Operation would block */
#define ENOMSG 42 /* No message of desired type */
#define EIDRM 43 /* Identifier removed */
#define ECHRNG 44 /* Channel number out of range */
#define EL2NSYNC 45 /* Level 2 not synchronized */
#define EL3HLT 46 /* Level 3 halted */
#define EL3RST 47 /* Level 3 reset */
#define ELNRNG 48 /* Link number out of range */
#define EUNATCH 49 /* Protocol driver not attached */
#define ENOCSI 50 /* No CSI structure available */
#define EL2HLT 51 /* Level 2 halted */
#define EBADE 52 /* Invalid exchange */
#define EBADR 53 /* Invalid request descriptor */
#define EXFULL 54 /* Exchange full */
#define ENOANO 55 /* No anode */
#define EBADRQC 56 /* Invalid request code */
#define EBADSLT 57 /* Invalid slot */ #define EDEADLOCK EDEADLK #define EBFONT 59 /* Bad font file format */
#define ENOSTR 60 /* Device not a stream */
#define ENODATA 61 /* No data available */
#define ETIME 62 /* Timer expired */
#define ENOSR 63 /* Out of streams resources */
#define ENONET 64 /* Machine is not on the network */
#define ENOPKG 65 /* Package not installed */
#define EREMOTE 66 /* Object is remote */
#define ENOLINK 67 /* Link has been severed */
#define EADV 68 /* Advertise error */
#define ESRMNT 69 /* Srmount error */
#define ECOMM 70 /* Communication error on send */
#define EPROTO 71 /* Protocol error */
#define EMULTIHOP 72 /* Multihop attempted */
#define EDOTDOT 73 /* RFS specific error */
#define EBADMSG 74 /* Not a data message */
#define EOVERFLOW 75 /* Value too large for defined data type */
#define ENOTUNIQ 76 /* Name not unique on network */
#define EBADFD 77 /* File descriptor in bad state */
#define EREMCHG 78 /* Remote address changed */
#define ELIBACC 79 /* Can not access a needed shared library */
#define ELIBBAD 80 /* Accessing a corrupted shared library */
#define ELIBSCN 81 /* .lib section in a.out corrupted */
#define ELIBMAX 82 /* Attempting to link in too many shared libraries */
#define ELIBEXEC 83 /* Cannot exec a shared library directly */
#define EILSEQ 84 /* Illegal byte sequence */
#define ERESTART 85 /* Interrupted system call should be restarted */
#define ESTRPIPE 86 /* Streams pipe error */
#define EUSERS 87 /* Too many users */
#define ENOTSOCK 88 /* Socket operation on non-socket */
#define EDESTADDRREQ 89 /* Destination address required */
#define EMSGSIZE 90 /* Message too long */
#define EPROTOTYPE 91 /* Protocol wrong type for socket */
#define ENOPROTOOPT 92 /* Protocol not available */
#define EPROTONOSUPPORT 93 /* Protocol not supported */
#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT 96 /* Protocol family not supported */
#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
#define EADDRINUSE 98 /* Address already in use */
#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
#define ENETDOWN 100 /* Network is down */
#define ENETUNREACH 101 /* Network is unreachable */
#define ENETRESET 102 /* Network dropped connection because of reset */
#define ECONNABORTED 103 /* Software caused connection abort */
#define ECONNRESET 104 /* Connection reset by peer */
#define ENOBUFS 105 /* No buffer space available */
#define EISCONN 106 /* Transport endpoint is already connected */
#define ENOTCONN 107 /* Transport endpoint is not connected */
#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS 109 /* Too many references: cannot splice */
#define ETIMEDOUT 110 /* Connection timed out */
#define ECONNREFUSED 111 /* Connection refused */
#define EHOSTDOWN 112 /* Host is down */
#define EHOSTUNREACH 113 /* No route to host */
#define EALREADY 114 /* Operation already in progress */
#define EINPROGRESS 115 /* Operation now in progress */
#define ESTALE 116 /* Stale file handle */
#define EUCLEAN 117 /* Structure needs cleaning */
#define ENOTNAM 118 /* Not a XENIX named type file */
#define ENAVAIL 119 /* No XENIX semaphores available */
#define EISNAM 120 /* Is a named type file */
#define EREMOTEIO 121 /* Remote I/O error */
#define EDQUOT 122 /* Quota exceeded */ #define ENOMEDIUM 123 /* No medium found */
#define EMEDIUMTYPE 124 /* Wrong medium type */
#define ECANCELED 125 /* Operation Canceled */
#define ENOKEY 126 /* Required key not available */
#define EKEYEXPIRED 127 /* Key has expired */
#define EKEYREVOKED 128 /* Key has been revoked */
#define EKEYREJECTED 129 /* Key was rejected by service */ /* for robust mutexes */
#define EOWNERDEAD 130 /* Owner died */
#define ENOTRECOVERABLE 131 /* State not recoverable */ #define ERFKILL 132 /* Operation not possible due to RF-kill */ #define EHWPOISON 133 /* Memory page has hardware error */ #endif

Linux编程之错误代码的更多相关文章

  1. 牛人整理分享的面试知识:操作系统、计算机网络、设计模式、Linux编程,数据结构总结 转载

    基础篇:操作系统.计算机网络.设计模式 一:操作系统 1. 进程的有哪几种状态,状态转换图,及导致转换的事件. 2. 进程与线程的区别. 3. 进程通信的几种方式. 4. 线程同步几种方式.(一定要会 ...

  2. 【转】牛人整理分享的面试知识:操作系统、计算机网络、设计模式、Linux编程,数据结构总结

    基础篇:操作系统.计算机网络.设计模式 一:操作系统 1. 进程的有哪几种状态,状态转换图,及导致转换的事件. 2. 进程与线程的区别. 3. 进程通信的几种方式. 4. 线程同步几种方式.(一定要会 ...

  3. Linux 编程中的API函数和系统调用的关系【转】

    转自:http://blog.chinaunix.net/uid-25968088-id-3426027.html 原文地址:Linux 编程中的API函数和系统调用的关系 作者:up哥小号 API: ...

  4. linux编程获取本机网络相关参数

    getifaddrs()和struct ifaddrs的使用,获取本机IP 博客分类: Linux C编程   ifaddrs结构体定义如下: struct ifaddrs { struct ifad ...

  5. 面试知识:操作系统、计算机网络、设计模式、Linux编程,数据结构总结

    基础篇:操作系统.计算机网络.设计模式 一:操作系统 1. 进程的有哪几种状态,状态转换图,及导致转换的事件. 2. 进程与线程的区别. 3. 进程通信的几种方式. 4. 线程同步几种方式.(一定要会 ...

  6. Linux编程简介

    Linux编程可以分为Shell(如BASH.TCSH.GAWK.Perl.Tcl和Tk等)编程和高级语言(C语言,C++语言,java语言等)编程,Linux程序需要首先转化为低级机器语言即所谓的二 ...

  7. Linux编程return与exit区别

    Linux编程return与exit区别 exit  是用来结束一个程序的执行的,而return只是用来从一个函数中返回. return return 表示从被调函数返回到主调函数继续执行,返回时可附 ...

  8. linux 编程技术

    linux 编程技术No.1前期准备工作 GCC的编译过程分为预处理.生成汇编代码.生成目标代码和链接成可执行文件等4个步骤. 使用vim编写C 文件 : [lining@localhost prog ...

  9. Linux编程之给你的程序开后门

    这里说的"后门"并不是教你做坏事,而是让你做好事,搭建自己的调试工具更好地进行调试开发.我们都知道,当程序发生异常错误时,我们需要定位到错误,有时我们还想,我们在不修改程序的前提下 ...

随机推荐

  1. double,long double及各变量数组内存开销

    IEEE754浮点数的表示方法.C语言里对float类型数据的表示范围为-3.4*10^38-+3.4*10^38.double为-1.7*10^-308~1.7*10^308,long double ...

  2. Jmeter 04 JMeter 负载与监听

    1. 场景设计 2. 场景设置 3. JMeter性能参数配置 4. 测试监听

  3. 【BZOJ2081】[Poi2010]Beads hash+调和级数

    [BZOJ2081][Poi2010]Beads Description Zxl有一次决定制造一条项链,她以非常便宜的价格买了一长条鲜艳的珊瑚珠子,她现在也有一个机器,能把这条珠子切成很多块(子串), ...

  4. Smarty模板的逻辑运算符号稍微做一下总结

    对Smarty模板的逻辑运算符号稍微做一下总结,以备后用. eq    equal : 相等neq    not equal:不等于gt    greater than:大于lt    less th ...

  5. SAP后台作业记录操作

    [转http://blog.163.com/liang_ce_521@126/blog/static/709202152013073376596/]后台作业信息存储在透明表TBTCP(批作业步骤概述) ...

  6. ABAP服务器文件操作

    转自http://blog.itpub.net/547380/viewspace-876667/ 在程序设计开发过程中,很多要对文件进行操作,这又分为对本地文件操作和服务器文件操作.对本地文件操作使用 ...

  7. Django——auth用户认证

    之前我们在进行用户校验的时候,总是从数据库中获取数据,然后再进行对比,就像如下这样: def login(request): if request.method == "POST" ...

  8. CI 框架下执行CLI(命令行)

    1.可以按照Ci官方文件的指导来进行操作 让我们先创建一个简单的控制器,打开你的文本编辑器,新建一个文件并命名为 Tools.php,然后输入如下的代码: <?php class Tools e ...

  9. struts2核心和工作原理

    转至:http://blog.csdn.net/laner0515/article/details/27692673 在学习struts2之前,首先我们要明白使用struts2的目的是什么?它能给我们 ...

  10. 【leetcode刷题笔记】Reverse Integer

    Reverse digits of an integer. Example1: x = 123, return 321Example2: x = -123, return -321 解题:设定一个变量 ...