proftpd全称:Professional FTP daemon,是针对Wu-FTP的弱项而开发的,除了改进的安全性,还具备许多Wu-FTP没有的特点,能以Stand-alone、xinetd模式运行等。ProFTP已经成为继Wu-FTP之后最为流行的FTP服务器软件,越来越多的站点选用它构筑安全高效的FTP站点,ProFTP配置方便,并有MySQL和Quota模块可供选择,利用它们的完美结合可以实现非系统账号的管理和用户磁盘的限制。<摘抄百度百科>

本章通过下载源码的方式安装,可以到官网下载最新版本:http://www.proftpd.org/

1、首先安装lrzsz方便拷贝文件到要搭建服务器的linux路径下

yum install lrzsz

2、上传文件解压

将下载完成的proftpd-1.3.6.tar.gz文件上传到指定路径,使用tar zxvf proftpd-1.3.6.tar.gz解压

3、由于使用源码安装,所以需要安装gcc编译环境

yum install gcc gcc-c++ autoconf automake

3、配置并制定安装和配置文件路径

./configure --prefix=/usr/local/proftpd --sysconfdir=/usr/local/proftpd

4、安装

make&make install

5、修改配置文件,限制匿名用户可以上传下载,但是不能删除(本章暂不详细描述权限控制部分内容)

vi /usr/local/proftpd/proftpd.conf

# This is a basic ProFTPD configuration file (rename it to
# 'proftpd.conf' for actual use. It establishes a single server
# and a single anonymous login. It assumes that you have a user/group
# "nobody" and "ftp" for normal operation and anon. ServerName "Welcome to FTP Server"
ServerType standalone
DefaultServer on # Port 21 is the standard FTP port.
Port 21 # Don't use IPv6 support by default.
UseIPv6 off # Umask 022 is a good standard umask to prevent new dirs and files
# from being group and world writable.
Umask 022 # To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd).
MaxInstances 30 # Set the user and group under which the server will run.
User nobody
Group nobody # To cause every FTP user to be "jailed" (chrooted) into their home
# directory, uncomment this line.
#DefaultRoot ~ # Normally, we want files to be overwriteable.
AllowOverwrite on IdentLookups off
UseReverseDNS off # Bar use of SITE CHMOD by default
<Limit SITE_CHMOD>
AllowAll
</Limit> # A basic anonymous configuration, no upload directories. If you do not
# want anonymous users, simply delete this entire <Anonymous> section.
<Anonymous /home>
User ftp
Group ftp # We want clients to be able to login with "anonymous" as well as "ftp"
UserAlias anonymous ftp # Limit the maximum number of anonymous logins
MaxClients 50 # We want 'welcome.msg' displayed at login, and '.message' displayed
# in each newly chdired directory.
DisplayLogin welcome.msg
DisplayChdir .message # Limit WRITE everywhere in the anonymous chroot
<Limit DELE RMD>
DenyAll
</Limit>
</Anonymous>

6、关闭防火墙

systemctl stop firewalld.service

systemctl disable firewalld.service

7、启动服务器

/usr/local/proftpd/sbin/proftpd

查看进程是否已经启动

[root@localhost ~]# ps -ef |grep proftpd
nobody 1140 1 0 12:13 ? 00:00:00 proftpd: (accepting connections)
root 3182 2270 0 12:50 pts/0 00:00:00 grep --color=auto proftpd  

8、添加到启动项避免每次重启后都需要手动启动

vi /etc/rc.d/rc.local

#!/bin/bash
# THIS FILE IS ADDED FOR COMPATIBILITY PURPOSES
#
# It is highly advisable to create own systemd services or udev rules
# to run scripts during boot instead of using this file.
#
# In contrast to previous versions due to parallel execution during boot
# this script will NOT be run after all other services.
#
# Please note that you must run 'chmod +x /etc/rc.d/rc.local' to ensure
# that this script will be executed during boot. touch /var/lock/subsys/local
/usr/local/proftpd/sbin/proftpd

由于在centos7中/etc/rc.d/rc.local的权限被降低了,所以需要加上可执行的权限:

chmod +x /etc/rc.d/rc.local

CentOS 7下安装配置proftpd搭建ftp服务器的更多相关文章

  1. windows 下使用 Filezilla server 搭建 ftp 服务器

    windows 下使用 Filezilla server 搭建 ftp 服务器 1. Filezilla server 免费,开源, ftp 服务端 2. 下载安装, windows  https:/ ...

  2. CentOS.7下安装配置FTP和SFTP服务

    一: FTP Centos7中默认已经安装了sshd服务(sftp), vsftpd需要手动安装 1.安装并启动FTP服务 1.1 安装vsftpd 使用 yum 安装 vsftpd yum inst ...

  3. 详解CentOS7安装配置vsftp搭建FTP

    安装配置vsftpd做FTP服务,我们的Web应用使用git管理进行迭代,公共文件软件存储使用开源网盘Seafile来管理,基本够用.想不到FTP的使用的场景,感觉它好像老去了,虽然现在基本没有用到这 ...

  4. CentOS系统下安装配置ftp服务

    安装配置步骤: rpm -ivh /opt/bak/vsftpd-2.2.2-11.el6.x86_64.rpm --本地安装vsftpd ll /etc/vsftpd/  --查看vsftpd的配置 ...

  5. Kali Linux下安装配置ProFTPD实例

    1.安装ProFTPD 在ftp://ftp.proftpd.org/下能够找到官方公布的各个ProFTPD版本号,本人使用ftp://ftp.proftpd.org/historic/source/ ...

  6. Linux安装配置vsftp搭建FTP的详细配置

    这里主要是说vsftp的配置:基础的可以参考Linux中VSFTP的配置 转自:https://www.jb51.net/article/103904.htm 修改配置文件 配置文件/etc/vsft ...

  7. centos 7下安装配置Supervisor

    1.安装Supervisor centos下安装yum install supervisor 2. systemctl enable supervisord 开机自启 systemctl start ...

  8. ubuntu系统下安装pyspider:搭建pyspider服务器新手教程

    首先感谢“巧克力味腺嘌呤”的博客和Debian 8.1 安装配置 pyspider 爬虫,本人根据他们的教程在ubuntu系统中进行了实际操作,发现有一些不同,也出现了很多错误,因此做此教程,为新手服 ...

  9. CentOS 7下安装配置搭建jdk+tomcat+MariaDB环境

    1.JDK安装 注意:rpm与软件相关命令 相当于window下的软件助手 管理软件 步骤: 1)查看当前Linux系统是否已经安装java 输入 rpm -qa | grep java 2)卸载两个 ...

随机推荐

  1. Oracle10G各版本下载以及补丁地址

    Oracle Database 10g Release 2 (10.2.0.1.0) Enterprise/Standard Edition for Microsoft Windows (32-bit ...

  2. [Selenium] Selenium私房菜(新手入门教程)

    http://wenku.baidu.com/link?url=JrHF9o0mKWcpEsE-wijcZaneBWgpmAJPRwGyWXd7RvqzJCLLrsrsv5lf9bPRmgKUa_v- ...

  3. JQ的双向数据绑定

    把渲染页面封装在function里面 在修改后直接调用,但是如果有alert();一定要注意function的摆放位置,正常应该是在alert前面,应为如果在后面会影响重新渲染的效果

  4. Crontab Build_setting的定期检查

    一.脚本功能 (1)检查所有的builting_setting.h是否能够编译通过,并将编译结果写入 编译结果.h文件中. (2)将编译结果通过邮箱发送给相关负责人. (3)系统定期执行任务,检查bu ...

  5. 【转】构建Maven项目自动下载jar包

    原文地址:https://blog.csdn.net/gfd54gd5f46/article/details/54973954 使用Maven 自动下载jar包 右键单击项目,将项目 转换成Maven ...

  6. E20180404-hm

    reject vt. 拒绝; 排斥; 抛弃,扔掉; 吐出或呕吐; conditioner  n. 调节器,调节装置 fabric n. 织物; 布; 构造; (建筑物的) 结构(如墙.地面.屋顶):质 ...

  7. 介绍一下Extern “C”,它的作用是什么?

    Extern “C”是由C++提供的一个连接交换指定符号,用于告诉C++这段代码是C函数.这是因为C++编译后库中函数名会变得很长,与C生成的不一致,造成C++不能直接调用C函数,加上extren “ ...

  8. POJ2365【几何】

    因为给出的点已经是顺时针了, 整个长度=相邻点距离+一个圆周长: C++ac代码-G++wa-因为标准不一样.G++用f //#include <bits/stdc++.h> #inclu ...

  9. poj1312dfs基础

    就是很简单的DFS-因为数据偏小,上去就是干了 #include <stdio.h> #include <string.h> #include <math.h> # ...

  10. jQuery笔记之工具方法—Ajax 优化回调地狱

    在上一篇文我们说到了回调地狱不好的地方,今天我们看看怎么来优化它,让它可以运用到实际开发中. 什么是回调地狱?回调地狱就是一个函数里面嵌套了所有功能函数,然后缩略图形成一个三角形. 这样的代码可复用性 ...