配置docker官方源并用yum安装docker

一、docker的官方安装文档：

https://docs.docker.com/engine/installation/linux/centos/

由docker给的文档可以看出它也只是去配置了一个docker的yum源、然后就通过这个源来安装docker了；在这个文档下我们采用手工配置

的方式

二、配置一个docker用的源：

　　1、为docker 增加一个新的yum配置文件；touch /etc/yum.repos.d/docker.repo

touch /etc/yum.repos.d/docker.repo

　　2、docker.repo的内容如下

[docker-ce-stable]
name=Docker CE Stable - $basearch
baseurl=https://download.docker.com/linux/centos/7/$basearch/stable
enabled=1
gpgcheck=0
gpgkey=https://download.docker.com/linux/centos/gpg

[docker-ce-stable-debuginfo]
name=Docker CE Stable - Debuginfo $basearch
baseurl=https://download.docker.com/linux/centos/7/debug-$basearch/stable
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg

[docker-ce-stable-source]
name=Docker CE Stable - Sources
baseurl=https://download.docker.com/linux/centos/7/source/stable
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg

[docker-ce-edge]
name=Docker CE Edge - $basearch
baseurl=https://download.docker.com/linux/centos/7/$basearch/edge
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg

[docker-ce-edge-debuginfo]
name=Docker CE Edge - Debuginfo $basearch
baseurl=https://download.docker.com/linux/centos/7/debug-$basearch/edge
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg

[docker-ce-edge-source]
name=Docker CE Edge - Sources
baseurl=https://download.docker.com/linux/centos/7/source/edge
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg

[docker-ce-test]
name=Docker CE Test - $basearch
baseurl=https://download.docker.com/linux/centos/7/$basearch/test
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg

[docker-ce-test-debuginfo]
name=Docker CE Test - Debuginfo $basearch
baseurl=https://download.docker.com/linux/centos/7/debug-$basearch/test
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg

[docker-ce-test-source]
name=Docker CE Test - Sources
baseurl=https://download.docker.com/linux/centos/7/source/test
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg

三、安装docker:

sudo yum install docker-ce
Loaded plugins: fastestmirror, langpacks
Loading mirror speeds from cached hostfile
Resolving Dependencies
--> Running transaction check
---> Package docker-ce.x86_64 0:17.03.1.ce-1.el7.centos will be installed
--> Processing Dependency: docker-ce-selinux >= 17.03.1.ce-1.el7.centos for package: docker-ce-17.03.1.ce-1.el7.centos.x86_64
--> Running transaction check
---> Package docker-ce-selinux.noarch 0:17.03.1.ce-1.el7.centos will be installed
--> Finished Dependency Resolution

Dependencies Resolved

=====================================================================================================================================
Package Arch Version Repository Size
=====================================================================================================================================
Installing:
docker-ce x86_64 17.03.1.ce-1.el7.centos docker-ce-stable 19 M
Installing for dependencies:
docker-ce-selinux noarch 17.03.1.ce-1.el7.centos docker-ce-stable 28 k

Transaction Summary
=====================================================================================================================================
Install 1 Package (+1 Dependent package)

Total download size: 19 M
Installed size: 19 M
Is this ok [y/d/N]: y

四、直接下载rpm包的方式来安装：

　　1、我在安装docker的时候发现下载的速度只有3kB/s 然而文件大小有19M；就在我感觉安装无望的时候、我机智的想到了自己直接把rpm下载下来

　　看了下docker.repo 、发现centos7的源地址是 https://download.docker.com/linux/centos/7/$basearch/stable 所以我只要去

https://download.docker.com/linux/centos/7/x86_64/stable/Packages/

　　用迅雷(我是会员有加速)把rpm包下载下来就行了

　　下载如下文件：

docker-ce-17.03.0.ce-1.el7.centos.x86_64.rpm
docker-ce-selinux-17.03.0.ce-1.el7.centos.noarch.rpm

五、安装docker:

ll
total 19096
-rwxrwxrwx 1 jianglexing jianglexing 19521288 May 30 20:05 docker-ce-17.03.0.ce-1.el7.centos.x86_64.rpm
-rw-r--r-- 1 jianglexing jianglexing 29108 May 30 20:15 docker-ce-selinux-17.03.0.ce-1.el7.centos.noarch.rpm
[root@workstudio docker]# yum localinstall *
Loaded plugins: fastestmirror, langpacks
Examining docker-ce-17.03.0.ce-1.el7.centos.x86_64.rpm: docker-ce-17.03.0.ce-1.el7.centos.x86_64
Marking docker-ce-17.03.0.ce-1.el7.centos.x86_64.rpm to be installed
Examining docker-ce-selinux-17.03.0.ce-1.el7.centos.noarch.rpm: docker-ce-selinux-17.03.0.ce-1.el7.centos.noarch
Marking docker-ce-selinux-17.03.0.ce-1.el7.centos.noarch.rpm to be installed
Resolving Dependencies
--> Running transaction check
---> Package docker-ce.x86_64 0:17.03.0.ce-1.el7.centos will be installed
---> Package docker-ce-selinux.noarch 0:17.03.0.ce-1.el7.centos will be installed
--> Finished Dependency Resolution

Dependencies Resolved

=====================================================================================================================================
Package Arch Version Repository Size
=====================================================================================================================================
Installing:
docker-ce x86_64 17.03.0.ce-1.el7.centos /docker-ce-17.03.0.ce-1.el7.centos.x86_64 65 M
docker-ce-selinux noarch 17.03.0.ce-1.el7.centos /docker-ce-selinux-17.03.0.ce-1.el7.centos.noarch 43 k

Transaction Summary
=====================================================================================================================================
Install 2 Packages

Total size: 65 M
Installed size: 65 M
Is this ok [y/d/N]: y
Downloading packages:
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : docker-ce-selinux-17.03.0.ce-1.el7.centos.noarch 1/2
setsebool: SELinux is disabled.
libsemanage.semanage_direct_install_info: Overriding docker module at lower priority 100 with module at priority 400.
Installing : docker-ce-17.03.0.ce-1.el7.centos.x86_64 2/2
Verifying : docker-ce-17.03.0.ce-1.el7.centos.x86_64 1/2
Verifying : docker-ce-selinux-17.03.0.ce-1.el7.centos.noarch 2/2

Installed:
docker-ce.x86_64 0:17.03.0.ce-1.el7.centos docker-ce-selinux.noarch 0:17.03.0.ce-1.el7.centos

Complete!

六、启动docker:

[root@workstudio docker]# systemctl start docker
[root@workstudio docker]# ps -ef | grep docker
root 4458 1 1 20:22 ? 00:00:00 /usr/bin/dockerd
root 4465 4458 0 20:22 ? 00:00:00 docker-containerd -l unix:///var/run/docker/libcontainerd/docker-containerd.sock --metrics-interval=0 --start-timeout 2m --state-dir /var/run/docker/libcontainerd/containerd --shim docker-containerd-shim --runtime docker-runc
root 4589 4333 0 20:22 pts/1 00:00:00 grep --color=auto docker

七、测试docker是否能成功运行：

[root@workstudio docker]# docker run hello-world
Unable to find image 'hello-world:latest' locally
latest: Pulling from library/hello-world
78445dd45222: Pull complete
Digest: sha256:c5515758d4c5e1e838e9cd307f6c6a0d620b5e07e6f927b07d05f6d12a1ac8d7
Status: Downloaded newer image for hello-world:latest

Hello from Docker!
This message shows that your installation appears to be working correctly.

To generate this message, Docker took the following steps:
1. The Docker client contacted the Docker daemon.
2. The Docker daemon pulled the "hello-world" image from the Docker Hub.
3. The Docker daemon created a new container from that image which runs the
executable that produces the output you are currently reading.
4. The Docker daemon streamed that output to the Docker client, which sent it
to your terminal.

To try something more ambitious, you can run an Ubuntu container with:
$ docker run -it ubuntu bash

Share images, automate workflows, and more with a free Docker ID:
https://cloud.docker.com/

For more examples and ideas, visit:
https://docs.docker.com/engine/userguide/

如下是第一次运行hello-world 这个docker-image 由于它还不存在于本地、所以要下载它、这可能要用一点时间！

八、添加docker 中国官方源：

vi  /etc/docker/daemon.json

加入下面的源:

{
"registry-mirrors":["https://registry.docker-cn.com"]
}

重新加载源并重启docker :

systemctl daemon-reload
systemctl restart docker

九、开启ip_forward, 让容器能够访问互联网

如果仅仅是想临时启用IP路由转发功能：

1) #echo 1 > /proc/sys/net/ipv4/ip_forward

2) #sysctl -w net.ipv4.ip_forward=1

以上两种方法都可能立即开启路由功能，但如果系统重启，或执行了

# service network restart

命令，所设置的值即会丢失，如果想永久保留配置，可以修改/etc/sysctl.conf文件

将 net.ipv4.ip_forward=0改为net.ipv4.ip_forward=1