centos6.5安装zookeeper教程(三)
1. 下载安装文件zookeeper-3.4.6.tar.gz
2. 还是copy到虚拟机的centos系统桌面
3. 新建/usr/loca/zookeeper文件夹
[root@localhost ~]# mkdir -pv /usr/local/zookeeper
4.拷贝文件到指定文件夹
[root@localhost ~]# cd /root/Desktop/
[root@localhost ~]# cp ./zookeeper-3.4.6.tar.gz /usr/local/zookeeper
5. 解压
[root@localhost ~]# tar -zxvf jdk-8u121-linux-x64.tar.gz
6. 配置环境变量
[root@localhost ~]#cd /etc/
[root@localhost ~]#cp ./profile ./profile.bak -- 把文件备份一下
[root@localhost ~]#vi /etc/profile -- 编辑此配置文件
在文件末尾添加此段内容: -- 开始和--中间的一段.(注意,尽量保持环境变量名全大写,下划线隔开. 保持规范)
-- 开始
export ZOOKEEPER_INSTALL=/usr/local/zookeeper/zookeeper-3.4.6/
export PATH=$PATH:$ZOOKEEPER_INSTALL/bin
-- 结束
7. 配置文件修改
[root@localhost zookeeper-3.4.6]# cd /usr/local/zookeeper/zookeeper-3.4.6/conf/ -- 进入文件所在路径
[root@localhost conf]# cp zoo_sample.cfg zoo.cfg -- 将zoo.sample.cfg拷贝出一份zoo.cfg出来. 文件名强制
8. 文件内容如下:
[root@localhost conf]# vi zoo.cfg -- 按i进入编辑模式. 修改完成之后, esc退出编辑模式, 大写字母Z双击即可保存.
# The number of milliseconds of each tick
tickTime=2000
# The number of ticks that the initial
# synchronization phase can take
initLimit=10
# The number of ticks that can pass between
# sending a request and getting an acknowledgement
syncLimit=5
# the directory where the snapshot is stored.
# do not use /tmp for storage, /tmp here is just
# example sakes.
dataDir=/tmp/zookeeper -- 这里要设置一下文件路径 路径必须存在,不存在的话就新建一个呗
dataLogDir=/tmp/zookeeper/log -- 日志路径 路径必须存在,不存在的话就新建一个呗
# the port at which the clients will connect
clientPort=2181 -- 如果是多机器的话,在clientPort处添加服务器的ip
# the maximum number of client connections.
# increase this if you need to handle more clients
#maxClientCnxns=60
#
# Be sure to read the maintenance section of the
# administrator guide before turning on autopurge.
#
# http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance
#
# The number of snapshots to retain in dataDir
#autopurge.snapRetainCount=3
# Purge task interval in hours
# Set to "0" to disable auto purge feature
#autopurge.purgeInterval=1
修改完之后 通过 > # cat zoo.cfg 查看.
9. 开启服务,关闭服务, 查看
[root@localhost bin]# cd /usr/local/zookeeper/zookeeper.3.4.6/bin/
[root@localhost bin]# ./zkServer.sh stop -- 停止服务
JMX enabled by default
Using config: /usr/local/zookeeper/zookeeper-3.4.6/bin/../conf/zoo.cfg
Stopping zookeeper ... STOPPED
[root@localhost bin]# ./zkServer.sh start -- 开启服务
JMX enabled by default
Using config: /usr/local/zookeeper/zookeeper-3.4.6/bin/../conf/zoo.cfg
Starting zookeeper ... STARTED
[root@localhost bin]# ./zkServer.sh status -- 查看状态
JMX enabled by default
Using config: /usr/local/zookeeper/zookeeper-3.4.6/bin/../conf/zoo.cfg
Mode: standalone
[root@localhost bin]#
[root@localhost bin]# ./zkCli.sh -- 客户端启动, 可以查看启动状态和日志
Connecting to localhost:2181
2017-03-08 06:15:26,918 [myid:] - INFO [main:Environment@100] - Client environment:zookeeper.version=3.4.6-1569965, built on 02/20/2014 09:09 GMT
2017-03-08 06:15:26,923 [myid:] - INFO [main:Environment@100] - Client environment:host.name=localhost
2017-03-08 06:15:26,923 [myid:] - INFO [main:Environment@100] - Client environment:java.version=1.8.0_121
2017-03-08 06:15:26,925 [myid:] - INFO [main:Environment@100] - Client environment:java.vendor=Oracle Corporation
2017-03-08 06:15:26,926 [myid:] - INFO [main:Environment@100] - Client environment:java.home=/usr/local/java/jdk1.8.0_121/jre
2017-03-08 06:15:26,926 [myid:] - INFO [main:Environment@100] - Client environment:java.class.path=/usr/local/zookeeper/zookeeper-3.4.6/bin/../build/classes:/usr/local/zookeeper/zookeeper-3.4.6/bin/../build/lib/*.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../lib/slf4j-log4j12-1.6.1.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../lib/slf4j-api-1.6.1.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../lib/netty-3.7.0.Final.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../lib/log4j-1.2.16.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../lib/jline-0.9.94.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../zookeeper-3.4.6.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../src/java/lib/*.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../conf:.:/usr/local/java/jdk1.8.0_121/lib/dt.jar:/usr/local/java/jdk1.8.0_121/lib/tools.jar:/usr/local/java/jdk1.8.0_121/jre/lib:.:/usr/local/java/jdk1.8.0_121/lib/dt.jar:/usr/local/java/jdk1.8.0_121/lib/tools.jar:/usr/local/java/jdk1.8.0_121/jre/lib:.:/usr/local/java/jdk1.8.0_121/lib/dt.jar:/usr/local/java/jdk1.8.0_121/lib/tools.jar:/usr/local/java/jdk1.8.0_121/jre/lib:
2017-03-08 06:15:26,926 [myid:] - INFO [main:Environment@100] - Client environment:java.library.path=/usr/java/packages/lib/amd64:/usr/lib64:/lib64:/lib:/usr/lib
2017-03-08 06:15:26,926 [myid:] - INFO [main:Environment@100] - Client environment:java.io.tmpdir=/tmp
2017-03-08 06:15:26,926 [myid:] - INFO [main:Environment@100] - Client environment:java.compiler=<NA>
2017-03-08 06:15:26,930 [myid:] - INFO [main:Environment@100] - Client environment:os.name=Linux
2017-03-08 06:15:26,930 [myid:] - INFO [main:Environment@100] - Client environment:os.arch=amd64
2017-03-08 06:15:26,930 [myid:] - INFO [main:Environment@100] - Client environment:os.version=2.6.32-431.el6.x86_64
2017-03-08 06:15:26,931 [myid:] - INFO [main:Environment@100] - Client environment:user.name=root
2017-03-08 06:15:26,931 [myid:] - INFO [main:Environment@100] - Client environment:user.home=/root
2017-03-08 06:15:26,931 [myid:] - INFO [main:Environment@100] - Client environment:user.dir=/usr/local/zookeeper/zookeeper-3.4.6/bin
2017-03-08 06:15:26,940 [myid:] - INFO [main:ZooKeeper@438] - Initiating client connection, connectString=localhost:2181 sessionTimeout=30000 watcher=org.apache.zookeeper.ZooKeeperMain$MyWatcher@277050dc
Welcome to ZooKeeper!
2017-03-08 06:15:27,039 [myid:] - INFO [main-SendThread(localhost:2181):ClientCnxn$SendThread@975] - Opening socket connection to server localhost/0:0:0:0:0:0:0:1:2181. Will not attempt to authenticate using SASL (unknown error)
JLine support is enabled
2017-03-08 06:15:27,290 [myid:] - INFO [main-SendThread(localhost:2181):ClientCnxn$SendThread@852] - Socket connection established to localhost/0:0:0:0:0:0:0:1:2181, initiating session
[zk: localhost:2181(CONNECTING) 0] 2017-03-08 06:15:27,445 [myid:] - INFO [main-SendThread(localhost:2181):ClientCnxn$SendThread@1235] - Session establishment complete on server localhost/0:0:0:0:0:0:0:1:2181, sessionid = 0x15aae45f1330000, negotiated timeout = 30000
WATCHER::
WatchedEvent state:SyncConnected type:None path:null
root@localhost bin]# ps -ef | grep zookeeper -- 查看zookeeper的服务进程. 看样子还是挺嗨的.
root 9779 9774 0 05:26 pts/0 00:00:09 /usr/local/java/jdk1.8.0_121/bin/java -Dzookeeper.log.dir=. -Dzookeeper.root.logger=INFO,CONSOLE -cp /usr/local/zookeeper/zookeeper-3.4.6/bin/../build/classes:/usr/local/zookeeper/zookeeper-3.4.6/bin/../build/lib/*.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../lib/slf4j-log4j12-1.6.1.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../lib/slf4j-api-1.6.1.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../lib/netty-3.7.0.Final.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../lib/log4j-1.2.16.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../lib/jline-0.9.94.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../zookeeper-3.4.6.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../src/java/lib/*.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../conf:.:/usr/local/java/jdk1.8.0_121/lib/dt.jar:/usr/local/java/jdk1.8.0_121/lib/tools.jar:/usr/local/java/jdk1.8.0_121/jre/lib:.:/usr/local/java/jdk1.8.0_121/lib/dt.jar:/usr/local/java/jdk1.8.0_121/lib/tools.jar:/usr/local/java/jdk1.8.0_121/jre/lib:.:/usr/local/java/jdk1.8.0_121/lib/dt.jar:/usr/local/java/jdk1.8.0_121/lib/tools.jar:/usr/local/java/jdk1.8.0_121/jre/lib: org.apache.zookeeper.ZooKeeperMain
root 10188 10183 0 06:14 pts/0 00:00:00 /usr/local/java/jdk1.8.0_121/bin/java -Dzookeeper.log.dir=. -Dzookeeper.root.logger=INFO,CONSOLE -cp /usr/local/zookeeper/zookeeper-3.4.6/bin/../build/classes:/usr/local/zookeeper/zookeeper-3.4.6/bin/../build/lib/*.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../lib/slf4j-log4j12-1.6.1.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../lib/slf4j-api-1.6.1.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../lib/netty-3.7.0.Final.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../lib/log4j-1.2.16.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../lib/jline-0.9.94.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../zookeeper-3.4.6.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../src/java/lib/*.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../conf:.:/usr/local/java/jdk1.8.0_121/lib/dt.jar:/usr/local/java/jdk1.8.0_121/lib/tools.jar:/usr/local/java/jdk1.8.0_121/jre/lib:.:/usr/local/java/jdk1.8.0_121/lib/dt.jar:/usr/local/java/jdk1.8.0_121/lib/tools.jar:/usr/local/java/jdk1.8.0_121/jre/lib:.:/usr/local/java/jdk1.8.0_121/lib/dt.jar:/usr/local/java/jdk1.8.0_121/lib/tools.jar:/usr/local/java/jdk1.8.0_121/jre/lib: org.apache.zookeeper.ZooKeeperMain
root 10230 1 0 06:15 pts/1 00:00:01 /usr/local/java/jdk1.8.0_121/bin/java -Dzookeeper.log.dir=. -Dzookeeper.root.logger=INFO,CONSOLE -cp /usr/local/zookeeper/zookeeper-3.4.6/bin/../build/classes:/usr/local/zookeeper/zookeeper-3.4.6/bin/../build/lib/*.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../lib/slf4j-log4j12-1.6.1.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../lib/slf4j-api-1.6.1.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../lib/netty-3.7.0.Final.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../lib/log4j-1.2.16.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../lib/jline-0.9.94.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../zookeeper-3.4.6.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../src/java/lib/*.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../conf:.:/usr/local/java/jdk1.8.0_121/lib/dt.jar:/usr/local/java/jdk1.8.0_121/lib/tools.jar:/usr/local/java/jdk1.8.0_121/jre/lib: -Dcom.sun.management.jmxremote -Dcom.sun.management.jmxremote.local.only=false org.apache.zookeeper.server.quorum.QuorumPeerMain /usr/local/zookeeper/zookeeper-3.4.6/bin/../conf/zoo.cfg
root 10282 10277 0 06:15 pts/0 00:00:01 /usr/local/java/jdk1.8.0_121/bin/java -Dzookeeper.log.dir=. -Dzookeeper.root.logger=INFO,CONSOLE -cp /usr/local/zookeeper/zookeeper-3.4.6/bin/../build/classes:/usr/local/zookeeper/zookeeper-3.4.6/bin/../build/lib/*.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../lib/slf4j-log4j12-1.6.1.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../lib/slf4j-api-1.6.1.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../lib/netty-3.7.0.Final.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../lib/log4j-1.2.16.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../lib/jline-0.9.94.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../zookeeper-3.4.6.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../src/java/lib/*.jar:/usr/local/zookeeper/zookeeper-3.4.6/bin/../conf:.:/usr/local/java/jdk1.8.0_121/lib/dt.jar:/usr/local/java/jdk1.8.0_121/lib/tools.jar:/usr/local/java/jdk1.8.0_121/jre/lib:.:/usr/local/java/jdk1.8.0_121/lib/dt.jar:/usr/local/java/jdk1.8.0_121/lib/tools.jar:/usr/local/java/jdk1.8.0_121/jre/lib:.:/usr/local/java/jdk1.8.0_121/lib/dt.jar:/usr/local/java/jdk1.8.0_121/lib/tools.jar:/usr/local/java/jdk1.8.0_121/jre/lib: org.apache.zookeeper.ZooKeeperMain
root 10314 8885 0 06:18 pts/0 00:00:00 grep zookeeper
[root@localhost bin]#
10 到此, zookeeper的单机版安装完成.
centos6.5安装zookeeper教程(三)的更多相关文章
- Centos6.7安装Cacti教程
Centos6.7安装Cacti教程# link:http://docs.cacti.net/plugins/ blog地址:http://www.cnblogs.com/caoguo 一.基本环境安 ...
- Centos6.7 安装Naigos教程
Centos6.7 安装Naigos教程参考文档:https://assets.nagios.com/downloads/nagioscore/docs/nagioscore/4/en/quickst ...
- 阿里云CentOS6.3 安装MongoDB教程
安装说明 系统环境:Centos-6.3安装软件:mongodb-linux-x86_64-2.2.2.tgz下载地址:http://www.mongodb.org/downloads安装机器:192 ...
- 170426、centos6.5安装 Zookeeper注册中心
注册中心服务器(192.168.3.71)配置,安装 Zookeeper: 1. 修改操作系统的/etc/hosts 文件中添加: # zookeeper servers 192.168.3.71 r ...
- Linux系统下安装zookeeper教程
环境: 1.VMware® Workstation 12 Pro 2.CentOS7 3.zookeeper-3.4.6 安装步骤 1.下载zookeeper 本文使用的zookeeper下载地址如下 ...
- Centos6.5安装JDK8教程(一)
[原] 转载请注明原文地址, 保持对知识基本尊重,谢谢! Win7宿主系统 VmWareWorkstation 11应用下的 Centos6.5系统. /******************* ...
- liunx centOS6.5安装jdk教程
第一步:mkdir /usr/java/ --在/usr目录下新建一个java目录 第二步:cp jdk-7u25-linux-x64.rpm /usr/java/ --将JDK文件复制到/usr/j ...
- CentOS6.5 安装Zookeeper集群
1.下载解压 2.配置环境变量:vi ~/.bashrc 或者 vi /etc/profile [hadoopuser@Linux01 ~]$ vi ~/.bashrc # zookeeper ...
- Linux环境CentOS6.9安装配置Elasticsearch6.2.2最全详细教程
Linux环境CentOS6.9安装配置Elasticsearch6.2.2最全详细教程 前言 第一步:下载Elasticsearch6.2.2 第二步:创建应用程序目录 第四步:创建Elastics ...
随机推荐
- R语言set.seed()函数介绍
set.seed(),该命令的作用是设定生成随机数的种子,种子是为了让结果具有重复性.如果不设定种子,生成的随机数无法重现.这个函数的主要目的,是让你的模拟能够可重复出现,因为很多时候我们需要取随机数 ...
- UML建模：学习笔记(1)
UML:学习笔记(1) 事物 结构事物 类: 接口: 协作:(定义元素之间的相互作用) 用例:(在系统外部和系统交互的人) 组件:(描述物理系统的一部分) 节点:(一个节点可以被定义为运行时存在的物理 ...
- 项目中对模板和js，css文件进行压缩的处理类
我们知道,在html的页面中,所有空格和换行符其实都会占据一定的空间,即使使用了gzip压缩,在传输过程中依然会浪费用户的流量和我们自己服务器的带宽,此脚本就是为了解决这个问题而诞生的. 请自行下载G ...
- MySQL 创建索引(Create Index)的方法和语法结构及例子
MySQL 创建索引(Create Index)的方法和语法结构及例子 MySQL 创建索引(Create Index)的方法和语法结构及例子 CREATE INDEX Syntax CREATE ...
- Android 蓝牙实例【转】
本文转自:http://www.yiibai.com/android/android_bluetooth.html 在很多方面,蓝牙是一种能够发送或接受两个不同的设备之间传输的数据. Android平 ...
- ios 微信发送位置
@interface GroupReportViewController () <BMKMapViewDelegate,BMKLocationServiceDelegate,BMKGeoCode ...
- scikit-learn笔记之初次接触
一.加载数据: 然后看一下有多少个特征和类别以及它们的名字: 二.数据可视化:: 由于该套数据集有4个特征,所以只能选取2个特征进行显示. 可见红色和绿色的点混在一起,所以再选择其他特征作为坐标轴: ...
- Luogu-1381 单词背诵
先将n个单词插入哈希表,记录左右端点,每次右端点往后移动,读入一个新的单词并记录下它的哈希值,如果这个单词之前没出现过那么更新\(ans\)和\(minl\),如果左端点的单词出现了不止一次则可以往右 ...
- Struts 2简介
Struts 2简介 Struts 2 编辑 同义词 Struts2一般指Struts 2 Struts2是一个基于MVC设计模式的Web应用框架,它本质上相当于一个servlet,在MVC设计模式中 ...
- 分享知识-快乐自己：N及分类（双重循环、递归）实现
实现多级分类: 1.双重 for 循环实现 N 及分类 /*** * 执行遍历 * * @param menus * 所有权限列表集合 * @param list * 指定角色查询到的 权限Id * ...