EVE-NG FAQ

EVE-NG FAQ

How to install EVE on bare box using Ubuntuoriginal ISO distro.

Get Ubuntu ISO:

https://www.ubuntu.com/download/server/thank-you?version=16.04.1&architecture=amd64

and install Ubuntu server till you reachUNL installation using bellow guide:

http://www.unetlab.com/2015/08/installing-unetlab-on-a-physical-server/#main

1.      Login with your user as root:

sudo su

Enter your user password

2.      Change root passw

Type: sudo passwd root

root@unl01:~# sudo passwdroot

Enternew UNIX password: eve

Retypenew UNIX password: eve

passwd: password updatedsuccessfully

3.      Change hostname if need

nano /etc/hostname and

nano/etc/hosts

4.      Allow access to use root userssh

From cli:

nano/etc/ssh/sshd_config

change this line:

PermitRootLogin without-password

to

PermitRootLogin yes

And restart the SSHserver:

sudo service ssh restart

5.      After first boot ssh to serverand modify:

sed -i-e's/GRUB_CMDLINE_LINUX=""/GRUB_CMDLINE_LINUX="net.ifnames=0"/'  /etc/default/grub

update-grub

 

reboot server

6.      It can be skipped ifyou have already IP configured per your needs

 

That step showswhere to configure IP

 

Type nano/etc/network/interfaces

Do adding’s and necessarychanges for this file below:

nano/etc/network/interfaces

# This file describes thenetwork interfaces available on your system

# and how to activatethem. For more information, see interfaces(5).

# The loopback networkinterface

auto lo

iface lo inet loopback

# The primary networkinterface

autoeth0

ifaceeth0 inet dhcp

 

It can also be staticIP, not necessary DHCP

7.      wget -O -http://everbx.podzone.net/repo/eczema@ecze.com.gpg.key | sudo apt-key add -

8.      apt-get update

9.      sudo add-apt-repository"deb [arch=amd64] http://everbx.podzone.net/repo xenial main"

10.  apt-get update

11.  DEBIAN_FRONTEND=noninteractiveapt-get -y install eve-ng

12.  su -

# answer to question …...

来源： http://bbs.hh010.com/thread-500335-1-1.html

 

问：在HTML5控制台中，我单击断开连接并进入鳄梨酱登录页面，现在无法获取任何会话。恐慌。
A：退出/从/到前夕登录，以便能够再次打开html控制台。

问：如何升级我的EVE？

观看视频 
A：运行以下命令：
        apt-get update
        apt-get upgrade

重要提示：更新您的EVE VM后，请使用F5重启您的EVE VM和CLEAR浏览器缓存并刷新浏览器。

问：如何从UNL迁移到EVE？是upgarde可能吗？
A：不是。唯一的办法是备份UNL的所有图像，实验室等，从ISO或OVA安装新的EVE，并将备份从UNL移动到EVE。

问：为什么我的wireshark不工作？（
A：您需要编辑C：\ Program Files \ UNetLab \ wireshark_wrapper.bat文件，并更改root密码以匹配您使用的密码

。Q：启动更多，然后10个CSR给CPU HOG做什么？
A：UKSM是好的对于10个CSR，如果要启动超过10个CSR，请禁用UKSM

问：如何修复权限？
A：从cli 
        / opt / unetlab / wrappers / unl_wrapper -a修复漏洞运行命令

：Q：如何检查从CLI运行的EVE-NG版本？
A：从cli         dpkg -l eve-ng 运行这些命令

问：我的空间不足，我如何向虚拟机添加更多的存储空间？

观看视频 
A：确保您正在运行2.0.2-23 EVE版本或更高版本
        关闭VM 
        将新磁盘添加到具有所需大小
        的虚拟机启动VM

问：EVE-NG的默认用户名和密码是什么？
A：CLI - root / eve 
    WEB - admin / eve

问：如何将多个节点连接到同一网络？
A：将网络对象添加到实验室拓扑中，并将多个节点连接到它。

问：什么是CPU限制状态？
A：它限制每个节点的CPU过载，但它不涉及公共CPU利用率。

问：我的IOL节点升级到v2.0.3-53后在NVRAM中丢失配置:(
A：正确，如果实验室是在版本v2.0.2-23之前创建的，IOL使用旧代码与在以后的版本中修复的bug）new版本需要重新运行节点，将为您的IOL创建新的NVRAM解决方案保持您的配置：最好的方式如果你已经expoerted这些配置使用export cfg功能然后你可以启动节点NVRAM擦拭与您的配置在新版本前夕。

来源： http://www.unetlab.com/index.php/faq

 

Dynamips (Cisco IOS emulation)

• c7200-adventerprisek9-mz.152-4.S6 (supported cards: PA-FE-TX, PA-4E, PA-8E)
• c3725-adventerprisek9-mz.124-15.T14 (supported cards: NM-1FE-TX, NM-16ESW)
• c1710-bk9no3r2sy-mz.124-23
• Other images from the above series should work too

IOL (IOS on Linux also known as IOU)

• L2-ADVENTERPRISE-M-15.1-20131216.bin
• L2-ADVENTERPRISE-M-15.1-20140814.bin
• L2-IPBASEK9-M-15.1-20130726.bin
• L3-ADVENTERPRISEK9-M-15.4-1T.bin
• L3-ADVENTERPRISEK9-M-15.4-2T.bin
• L3-ADVIPSERVICES-M-15.1-2.9S.bin
• And others

Qemu

• Cisco ACS 5.6, 5.8.1.4
• Cisco ISE 1.2, 1.4
• Cisco ISE 2.1
• Cisco ASA 8.0.2 (Singe and Multi Context)
• Cisco ASA 8.4 Multicontext Support
• Cisco ASA 9.1.5 Multicontext Support
• Cisco ASAv 9.6.2, 9.7.1 or earlier
• Cisco IPS 7.1
• Cisco Firepower 6.1, 6.2 Management centre (FMC)
• Cisco Firepower 6.1, 6.2 Treat defence ASAv (FTD)
• Cisco Firepower 6.1, 6.2 NGIPSv
• Cisco Firepower 5.4 (NGIPS, FMC)
• Cisco CSR 3.16, 3,17
• Cisco CSR 16.03 Denali
• Cisco CSR 16.0.4 Everest
• Cisco vIOS L3 15.5, 15.6.2T
• Cisco vIOS L2 15.2
• Cisco ESA 9.7, 9.8, Email Security Appliance
• Cisco WSA 8.6, 9.2 10.0 Web Security Appliance
• Cisco CDA 1.0 Context Delivery Agent
• Cisco NXOS Titanium 7.1.0.3
• Cisco NXOSk9 (require source of 2xCPU and 8G RAM for single node)
• Cisco XRv 5.2.2, 5.3.2, 6.0.1, 6.0.2
• Cisco XRvK9 6.0.1, 6.1.2 (require source of 4xCPU and 16G RAM for single node)
• Cisco vWLC, 7.4. 8.0.100, 8.2.X, 8.3.X
• Cisco vNAM Virtual Network Analysis Module 6.2.x
• Cisco vWAAS 200.5.5
• Cisco CUCM 11.5.1.11900-26

• Juniper vSRX 12.1.47D
• Juniper Olive M series
• Juniper vSRX NG 15.1x49-D40.6
• Juniper vXRX NG 15.1X49-D70.3
• Juniper vMX 14.1.4R8
• Juniper vMX 16.1R3.10 VCP (control plane node)
• Juniper vMX 16.1R3.10 VFP (forwarding plane node)
• Juniper vMX 17.1 VCP (control plane node)
• Juniper vMX 17.1 VFP (forwarding plane node)
• Juniper vQFX 10K VRE (routing engine)
• Juniper vQFX 10K VFE (forwarding engine)
• Junos Sphere 16.1

• Alcatel 7750SR: 13.0.R3
• A10, vThunder 2.7.1
• Aruba: Clearpass 6.4.X
• Arista vEOS 4,17.2F and earlier versions
• Barracuda NGFW
• Brocade vADX 3.01.1
• Checkpoint FW: R77-20, R77-30
• Citrix Netscaler 11.0.62
• Dell SonicWall 11.3.0
• CumulusVX 2.5.3
• ExtremeOS 21.1.14
• F5 BIG-IP 12.0.0 Supports LTM, GTM HA
• Fortinet Manager v5
• Fortinet Mail 53
• Fortinet FGT v5.X
• Fortinet 5.2.3
• HP VSR 1000 7.10
• Mikrotik 6.30.2
• PaloAlto FW 7.0, 7.1
• pfSense FW 2.3
• S-Terra FW, Gate 4.1,
• S-Terra CSP-VPN gate 3.1
• VyOS 1.1.6

• Windows XP
• Windows 7
• Windows 10
• Windows Server 2003
• Windows Server 2008R2
• Windows Server 2012 R2
• Windows Server 2016

• Linux TinyCore 6.4
• Linux Slax 7.08
• Linux Mint 18
• Linux Kali x64 Full
• Linux Kali x386 light
• Linux Mint 18
• Linux Ubuntu Desktop 16.04
• Linux DSL 4.4.10
• Linus Ubuntu Server 16.04 Webmin
• Linux NETem: NETem bandwidth limitation, delay, jitter and packet loss.
• Ostinato traffic generator 0.7, 0.8
  来源： http://www.unetlab.com/index.php/documentation/supported-images

 

使用例如FileZilla或WinSCP将下载的映像上传到EVE 。然后使用SSH协议以root身份登录并解压缩：

mkdir tmp
cd tmp
tar -xzvf ../NSVPX-KVM-10.5-54.9008.e_nc.tgz

将vmdk文件转换为兼容QEMU的格式：

/ opt / qemu / bin / qemu-img convert -f raw -O qcow2 NSVPX-KVM-10.5-54.9008.e_nc.raw virtioa.qcow2

创建HDD图像的文件夹并移动它：

mkdir -p /opt/unetlab/addons/qemu/nsvpx-10.5.54.9008
mv megasasa.qcow2 /opt/unetlab/addons/qemu/nsvpx-10.5.54.9008/virtioa.qcow2

清理并修复权限：

cd ..
rm -rf tmp
/ opt / unetlab / wrappers / unl_wrapper -a fixpermissions

来源： http://www.unetlab.com/index.php/documentation/howto-s/71-howto-add-citrix-netscaler

======================= End