NX二次开发-UFUN创建圆锥UF_MODL_create_cone1

     NX11+VS2013

     #include <uf.h>
     #include <uf_modl.h>

     UF_initialize();

     //创建圆锥
     UF_FEATURE_SIGN Sign = UF_NULLSIGN;//设置布尔
     double Origin[] = { 0.0, 0.0, 0.0 };//原点
     char *Height = "";//高度
     char *Diam[] = { "", "" };//顶部直径，底部直径
     double Dirction[] = { 0.0, 0.0, 1.0 };//矢量方向
     tag_t ConeTag = NULL_TAG;
     UF_MODL_create_cone1(Sign, Origin, Height, Diam, Dirction, &ConeTag);

     //创建圆锥
     UF_FEATURE_SIGN Sign1 = UF_NULLSIGN;//设置布尔
     double Origin1[] = { 0.0, 100.0, 0.0 };//原点
     char *Height1 = "";//高度
     char *Diam1[] = { "", "" };//顶部直径，底部直径
     double Dirction1[] = { 0.0, 0.0, 1.0 };//矢量方向
     tag_t ConeTag1 = NULL_TAG;
     UF_MODL_create_cone1(Sign1, Origin1, Height1, Diam1, Dirction1, &ConeTag1);

     UF_terminate();