NorFlash linux分区分析

一般情况下，与板卡相关的内容都在bsp中（即arch/arm/mach-xxx/board-xxx.c）中，但norflash的分区直接放在norflash驱动中。由于norflash应用基于mtd，所以驱动位于drivers/mtd/目录下，chips目录是norflash相关公用驱动，maps是不同板卡应用的的驱动，如at91sam9261.c。分区信息便在板卡norflash驱动文件中。

#define WINDOW_ADDR 0x10000000      /* physical properties of flash */

#define WINDOW_SIZE 0x800000

#define BUSWIDTH    2

#define MSG_PREFIX "SAM9261-NOR:"   /* prefix for our printk()'s */

#define MTDID      "sam9261-nor"    /* for mtdparts= partitioning */

static struct mtd_info *mymtd;

struct map_info sam9261nor_map = {

.name = "NOR flash on sam9261",

.size = WINDOW_SIZE,

.bankwidth = BUSWIDTH,

.phys = WINDOW_ADDR,

};

#ifdef CONFIG_MTD_PARTITIONS

/*

* MTD partitioning stuff

*/

static struct mtd_partition sam9261_partitions[] =

{

#if 1           /* New fs */

{   /* rootfs 2M */

.name = "rootfs",

.size = MTDPART_SIZ_FULL,

.offset = 0x380000,

},

#endif

};

驱动定义两个函数，用于加载卸载驱动：

static int __init init_sam9261nor(void);

static void __exit cleanup_sam9261nor(void);

module_init(init_sam9261nor);

module_exit(cleanup_sam9261nor);