【工具安装】MAC 安装 netdiscover 使用教程

---

日期：2019-06-27 15:54:19
作者：Bay0net
介绍：在 mac os 下，如何安装 netdiscover 及基本使用方法

---

0x01、当前环境

MAC os 10.14.4
已安装 brew

0x02、安装方式

使用 brew 安装
brew install sidaf/pentest/netdiscover

安装后，在命令行直接使用 netdiscover 命令出错

查找一下其路径，发现是 /usr/local/sbin/netdiscover

将 /usr/local/sbin/ 加入到环境变量中

vi ~/.zshrc
# add this in the last line of the document
export PATH="/usr/local/sbin/:$PATH"

在 iTerm2 中重新打开个 tab 即可。

0x03、使用说明

Usage: netdiscover [-i device] [-r range | -p] [-s time] [-n node] [-c count] [-f] [-S]
  -i device: your network device
  -r range: scan a given range instead of auto scan. 192.168.6.0/24,/16,/8
  -p passive mode do not send anything, only sniff
  -s time: time to sleep between each arp request (miliseconds)
  -c count: number of times to send each arp reques (for nets with packet loss)
  -n node: last ip octet used for scanning (from 2 to 253)
  -S enable sleep time supression betwen each request (hardcore mode)
  -f enable fastmode scan, saves a lot of time, recommended for auto

Some Examples

# use eth0 scan 10.1.2.0/24
netdiscover -i eth0 -r 10.1.2.0/24

# passive mode
netdiscover -p