以下全部转载于  http://blog.csdn.net/lane_l/article/details/20235909

本人于今晚按照该文章使用centos 6.7 64bit安装成功,做个备份,就转过来了。

---------------------------------------------------------------

转载者语:

转载于:http://www.osyunwei.com/archives/2353.html

原文标题:CentOS 6.2yum安装配置lnmp服务器(Nginx+PHP+MySQL)

本人以CentOS6.5亲测成功.

以下是原文.

------------------------------------------------------------------------------------------------------------------------------------

准备篇:

1、配置防火墙,开启80端口、3306端口
vi /etc/sysconfig/iptables
-A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT(允许80端口通过防火墙)
-A INPUT -m state --state NEW -m tcp -p tcp --dport 3306 -j ACCEPT(允许3306端口通过防火墙)
特别提示:很多网友把这两条规则添加到防火墙配置的最后一行,导致防火墙启动失败,正确的应该是添加到默认的22端口这条规则的下面
添加好之后防火墙规则如下所示:
#########################################################
# Firewall configuration written by system-config-firewall
# Manual customization of this file is not recommended.
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
-A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
-A INPUT -p icmp -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT
-A INPUT -mstate --state NEW -m tcp -p tcp --dport 80 -j ACCEPT
-A INPUT -mstate --state NEW -m tcp -p tcp --dport 3306 -j ACCEPT
-A INPUT -j REJECT --reject-with icmp-host-prohibited
-A FORWARD -j REJECT --reject-with icmp-host-prohibited
COMMIT
#########################################################
/etc/init.d/iptables restart  #最后重启防火墙使配置生效

2、关闭SELINUX
vi /etc/selinux/config
#SELINUX=enforcing       #注释掉
#SELINUXTYPE=targeted    #注释掉
SELINUX=disabled         #增加

:wq  保存,关闭
shutdown -r now   #重启系统

3、配置CentOS 6.2第三方yum源(CentOS默认的标准源里没有nginx软件包)
yum install wget    #安装下载工具wget
wget http://www.atomicorp.com/installers/atomic  #下载atomic yum源
sh ./atomic   #安装
yum check-update  #更新yum软件包
#############################################################################
安装篇:

一、安装nginx
yum install nginx      #安装nginx,根据提示,输入Y安装即可成功安装
service nginx start    #启动
chkconfig nginx on    #设为开机启动
/etc/init.d/nginx  restart  #重启
rm -rf /usr/share/nginx/html/*  #删除ngin默认测试页

二、安装MySQL
1、安装mysql

yum install mysql mysql-server   #询问是否要安装,输入Y即可自动安装,直到安装完成
/etc/init.d/mysqld start   #启动MySQL
chkconfig mysqld on   #设为开机启动
cp /usr/share/mysql/my-medium.cnf   /etc/my.cnf  #拷贝配置文件(注意:如果/etc目录下面默认有一个my.cnf,直接覆盖即可)
shutdown -r now  #重启系统

2、为root账户设置密码
mysql_secure_installation

回车,根据提示输入Y

输入2次密码,回车

根据提示一路输入Y

最后出现:Thanks for using MySQL!

MySql密码设置完成,重新启动 MySQL:
/etc/init.d/mysqld stop   #停止
/etc/init.d/mysqld start  #启动
service mysqld restart    #重启

三、安装PHP
1、安装PHP
yum install php   #根据提示输入Y直到安装完成 
2、安装PHP组件,使PHP支持 MySQL、PHP支持FastCGI模式
yum install php-mysql php-gd libjpeg* php-imap php-ldap php-odbc php-pear php-xml php-xmlrpc php-mbstring php-mcrypt php-bcmath php-mhash libmcrypt libmcrypt-devel php-fpm          #根据提示输入Y回车
/etc/init.d/mysqld restart  #重启MySql
/etc/init.d/nginx  restart  #重启nginx
/etc/rc.d/init.d/php-fpm start  #启动php-fpm
chkconfig php-fpm on  #设置开机启动
#############################################################################
配置篇

一、配置nginx支持php
cp /etc/nginx/nginx.conf  /etc/nginx/nginx.confbak    #备份原有配置文件
vi /etc/nginx/nginx.conf  #编辑
user  nginx  nginx;  #修改nginx运行账号为:nginx组的nginx用户

:wq!    #保存退出

cp /etc/nginx/conf.d/default.conf /etc/nginx/conf.d/default.confbak   #备份原有配置文件
vi /etc/nginx/conf.d/default.conf   #编辑

index index.php index.html index.htm;   #增加index.php

# pass the PHPscripts to FastCGI server listening on 127.0.0.1:9000
 #
 location ~ \.php$ {
   root          html;
   fastcgi_pass   127.0.0.1:9000;
   fastcgi_index  index.php;
   fastcgi_param  SCRIPT_FILENAME  $document_root$fastcgi_script_name;
   include       fastcgi_params;
 }
#取消FastCGI server部分location的注释,并要注意fastcgi_param行的参数,改为$document_root$fastcgi_script_name,或者使用绝对路径

二、配置php

vi /etc/php.ini   #编辑

date.timezone= PRC     #在946行 把前面的分号去掉,改为date.timezone = PRC

disable_functions=passthru,exec,system,chroot,scandir,chgrp,chown,shell_exec

,proc_open,proc_get_status,ini_alter,ini_restore,dl,openlog,syslog,readlink

,symlink,popepassthru,stream_socket_server,escapeshellcmd,dll,popen

,disk_free_space,checkdnsrr,getservbyname,getservbyport,disk_total_space

,posix_ctermid,posix_get_last_error,posix_getcwd,posix_getegid,posix_geteuid,posix_getgid

,posix_getgrgid,posix_getgrnam,posix_getgroups,posix_getlogin,posix_getpgid,posix_getpgrp

,posix_getpid,posix_getppid,posix_getpwnam,posix_getpwuid,posix_getrlimit,posix_getsid

,posix_getuid,posix_isatty,posix_kill,posix_mkfifo,posix_setegid,posix_seteuid,posix_setgid

,posix_setpgid,posix_setsid,posix_setuid,posix_strerror,posix_times,posix_ttyname,posix_uname
#在386行 列出PHP可以禁用的函数,如果某些程序需要用到这个函数,可以删除,取消禁用。
expose_php = Off        #在432行 禁止显示php版本的信息
magic_quotes_gpc = On   #在745行 打开magic_quotes_gpc来防止SQL注入
open_basedir = .:/tmp/  #在380行,设置表示允许访问当前目录(即PHP脚本文件所在之目录)和/tmp/目录,可以防止php木马跨站,如果改了之后安装程序有问题,可注销此行,或者直接写上程序目录路径/var/www/html/www.osyunwei.com/:/tmp/

:wq! #保存退出

(转载者语:magic_quotes_gpc我的配置中是不存在的,open_basedir没有看懂也就跳过了,这两条并没有影响我配置成功,隐患...暂时还没找到或者还没理解)

三、配置php-fpm
cp /etc/php-fpm.d/www.conf   /etc/php-fpm.d/www.confbak   #备份原有配置文件
vi /etc/php-fpm.d/www.conf   #编辑
user = nginx   #修改用户为nginx
group = nginx   #修改组为nginx

/etc/init.d/mysqld restart  #重启MySql
/etc/init.d/nginx  restart  #重启nginx
/etc/rc.d/init.d/php-fpm  restart  #重启php-fpm
#############################################################################
测试篇
cd /usr/share/nginx/html/   #进入nginx默认网站根目录
vi  index.php   #新建index.php文件

<?php
     phpinfo();

?>

:wq! #保存

chown nginx.nginx /usr/share/nginx/html/ -R  #设置目录所有者

chmod 700  /usr/share/nginx/html/ -R   #设置目录权限

在客户端浏览器输入服务器IP地址,可以看到相关的配置信息!
#############################################################################

备注

nginx默认站点目录是:/usr/share/nginx/html/

权限设置:chown nginx.nginx/usr/share/nginx/html/ -R

MySQL数据库目录是:/var/lib/mysql

权限设置:chown mysql.mysql -R /var/lib/mysql

此教程目前(2012.2.14)安装Nginx+PHP+MySQL版本如下:

nginx version: nginx/1.0.12

php 5.3.10 (cli)

server version:5.5.20-cll MySQL Community Server (GPL) by Atomicorp

CentOS 6.5 yum安装配置lnmp服务器(Nginx+PHP+MySQL)的更多相关文章

  1. CentOS 6.4安装配置LNMP服务器(Nginx+PHP+MySQL)

    准备篇 1.配置防火墙,开启80端口.3306端口 vi /etc/sysconfig/iptables-A INPUT -m state --state NEW -m tcp -p tcp --dp ...

  2. CentOS yum安装配置lnmp服务器(Nginx+PHP+MySQL)

    1.配置防火墙,开启80端口.3306端口 vi /etc/sysconfig/iptables-A INPUT -m state --state NEW -m tcp -p tcp --dport  ...

  3. CentOS 6.5安装配置LNMP服务器(Nginx+PHP+MySQL)

    CentOS 6.5安装配置LNMP服务器(Nginx+PHP+MySQL) 一.准备篇: /etc/init.d/iptables stop #关闭防火墙 关闭SELINUX vi /etc/sel ...

  4. CentOS 6.6安装配置LAMP服务器(Apache+PHP5+MySQL)

    准备篇: CentOS 6.6系统安装配置图解教程 http://www.osyunwei.com/archives/8398.html 1.配置防火墙,开启80端口.3306端口 vi /etc/s ...

  5. CentOS 6.4安装配置LAMP服务器(Apache+PHP5+MySQL)

    这篇文章主要介绍了CentOS 6.4安装配置LAMP服务器(Apache+PHP5+MySQL)的方法,需要的朋友可以参考下 文章写的不错,很详细:IDO转载自网络: 准备篇: 1.配置防火墙,开启 ...

  6. 阿里云服务器CentOS 5.7(64位)安装配置LAMP服务器(Apache+PHP5+MySQL)

    一.快速安装Apache+PHP5+MySql ----------------------------------------------------- 补充:由于163的yum源上只有php5.1 ...

  7. CentOS 6.3安装配置LAMP服务器(Apache+PHP5+MySQL)

    准备篇: 1.配置防火墙,开启80端口.3306端口 vi /etc/sysconfig/iptables -A INPUT -m state --state NEW -m tcp -p tcp -- ...

  8. CentOS 6.5安装配置LAMP服务器(Apache+PHP5+MySQL)的方法

    CentOS 6.5安装配置LAMP服务器(Apache+PHP5+MySQL)的方法 准备篇: 1.配置防火墙,开启80端口.3306端口vi /etc/sysconfig/iptables-A I ...

  9. CentOS 5.11安装配置LAMP服务器(Apache+PHP5+MySQL)

    http://www.osyunwei.com/archives/8880.html 准备篇: CentOS 5.x系统安装配置图解教程 http://www.osyunwei.com/archive ...

随机推荐

  1. echarts 图表应用

    <!DOCTYPE html> <html lang="en"> <head> <meta charset="UTF-8&quo ...

  2. Mybatis传多个参数(三种解决方案)

    http://blog.csdn.net/liangyihuai/article/details/49965869 (zhuan)

  3. 什么是JAVAbean

    JavaBean 是一种JAVA语言写成的可重用组件.为写成JavaBean,类必须是具体的和公共的,并且具有无参数的构造器.JavaBean 通过提供符合一致性设计模式的公共方法将内部域暴露成员属性 ...

  4. tslib1.4编译

    准备工作:ubuntu14.04-64位+arm-linux-gcc(2014)+tslib.14 1.arm-linux-gcc下载地址:http://www.veryarm.com/arm-non ...

  5. MVC3 数据验证用法之密码验证设计思路

    描述:MVC数据验证使用小结 内容:display,Required,stringLength,Remote,compare,RegularExpression 本人最近在公司用mvc做了一个修改密码 ...

  6. 在jasp页面循环显示

    <% int h=3;//行数 int l=3;//列数 %> <table> <% for(int i=0;i<h;i++){ %> <tr> ...

  7. 下载app后自动安装程序

    其实很简单,只需要几行代码就好了,首先要到服务器下载apk,然后才能安装,当然不是傻子应该都知道,我这里用到的是Httputils去下载, 这里需要一些权限 <uses-permission a ...

  8. ImageView cannot be resolved to a type

    问题: ImageView cannot be resolved to a type 报这样的错误是没有加载MainActivity.java文件中加入 import android.widget.I ...

  9. Winform-DataGridView 实现如Excel的粘贴复制

    void AddDataGridView(DataGridView gridView, string s) { s = s.Replace("/", @"\") ...

  10. False 等效值

    False 等效值 下面这些值将被计算出 false (also known as Falsy values): false undefined null 0 NaN 空字符串 ("&quo ...