LVS DR模型RS端修改配置脚本

 #!/bin/bash
 vip=x.x.x.x
 case $ in
 start)
     echo  > /proc/sys/net/ipv4/conf/all/arp_ignore
     echo  > /proc/sys/net/ipv4/conf/ethX/arp_ignore
     echo  > /proc/sys/net/ipv4/conf/all/arp_announce
     echo  > /proc/sys/net/ipv4/conf/ethX/arp_announce
     ifconfig lo: $vip netmask 255.255.255.255 broadcast $vip up
     ;;
 stop)
     ifconfig lo: down
     echo  > /proc/sys/net/ipv4/conf/all/arp_ignore
     echo  > /proc/sys/net/ipv4/conf/ethX/arp_ignore
     echo  > /proc/sys/net/ipv4/conf/all/arp_announce
     echo  > /proc/sys/net/ipv4/conf/ethX/arp_announce
     ;;
 esac

ethX为director端添加的RS地址的物理接口，请对应更改即可。