系统启动时需要加载的配置文件

/etc/profile、/root/.bash_profile
/etc/bashrc、/root/.bashrc
/etc/profile.d/*.sh、/etc/profile.d/lang.sh
/etc/sysconfig/i18n、/etc/rc.local(/etc/rc.d/rc.local)

一、修改开机启动文件:/etc/rc.local(或者/etc/rc.d/rc.local)

# .编辑rc.local文件
[root@localhost ~]# vi /etc/rc.local

# .修改rc.local文件,在 exit 前面加入以下命令。保存并退出。
/etc/init.d/mysqld start # mysql开机启动
/etc/init.d/nginx start # nginx开机启动
supervisord -c /etc/supervisor/supervisord.conf # supervisord开机启动
/bin/bash /server/scripts/test.sh >/dev/null >/dev/null

# .最后修改rc.local文件的执行权限
[root@localhost ~]# chmod +x /etc/rc.local
[root@localhost ~]# chmod /etc/rc.local

二、自己写一个shell脚本

将写好的脚本(.sh文件)放到目录 /etc/profile.d/ 下,系统启动后就会自动执行该目录下的所有shell脚本。

三、通过chkconfig命令设置

# .将(脚本)启动文件移动到 /etc/init.d/或者/etc/rc.d/init.d/目录下。(前者是后者的软连接)
mv /www/wwwroot/test.sh /etc/rc.d/init.d

# .启动文件前面务必添加如下三行代码,否侧会提示chkconfig不支持。
#!/bin/sh 告诉系统使用的shell,所以的shell脚本都是这样
#chkconfig: 分别代表运行级别,启动优先权,关闭优先权,此行代码必须
#description: http server 自己随便发挥!!!,此行代码必须
/bin/echo $(/bin/date +%F_%T) >> /tmp/test.log

# .增加脚本的可执行权限
chmod +x /etc/rc.d/init.d/test.sh

# .添加脚本到开机自动启动项目中。添加到chkconfig,开机自启动。
[root@localhost ~]# cd /etc/rc.d/init.d
[root@localhost ~]# chkconfig --add test.sh
[root@localhost ~]# chkconfig test.sh on

# .关闭开机启动
[root@localhost ~]# chkconfig test.sh off

# .从chkconfig管理中删除test.sh
[root@localhost ~]# chkconfig --del test.sh

# .查看chkconfig管理
[root@localhost ~]# chkconfig --list test.sh

四、自定义服务文件,添加到系统服务,通过Systemctl管理

1.写服务文件:如nginx.service、redis.service、supervisord.service

[Unit]:服务的说明
Description:描述服务
After:描述服务类别 [Service]服务运行参数的设置
Type=forking 是后台运行的形式
ExecStart 为服务的具体运行命令
ExecReload 为服务的重启命令
ExecStop 为服务的停止命令
PrivateTmp=True 表示给服务分配独立的临时空间
注意:启动、重启、停止命令全部要求使用绝对路径 [Install] 服务安装的相关设置,可设置为多用户
WantedBy=multi-user.target

2.文件保存在目录下:以754的权限。目录路径:/usr/lib/systemd/system。如上面的supervisord.service文件放在这个目录下面。

[root@localhost ~]# cat /usr/lib/systemd/system/nginx.service
[root@localhost ~]# cat /usr/lib/systemd/system/supervisord.service

3.设置开机自启动(任意目录下执行)。如果执行启动命令报错,则执行:systemctl daemon-reload

设置开机自启动
[root@localhost ~]# systemctl enable nginx.service
[root@localhost ~]# systemctl enable supervisord

停止开机自启动
[root@localhost ~]# systemctl disable nginx.service
[root@localhost ~]# systemctl disable supervisord 验证一下是否为开机启动
[root@localhost ~]# systemctl is-enabled nginx
[root@localhost ~]# systemctl is-enabled supervisord

4.其他命令

启动nginx服务
[root@localhost ~]# systemctl start nginx.service

停止nginx服务
[root@localhost ~]# systemctl start nginx.service

重启nginx服务
[root@localhost ~]# systemctl restart nginx.service

查看nginx服务当前状态
[root@localhost ~]# systemctl status nginx.service

查看所有已启动的服务
[root@localhost ~]# systemctl list-units --type=service

5.服务文件示例:

# supervisord.service进程管理服务文件
[Unit]
Description=Process Monitoring and Control Daemon # 内容自己定义:Description=Supervisor daemon
After=rc-local.service nss-user-lookup.target [Service]
Type=forking
ExecStart=/usr/bin/supervisord -c /etc/supervisor/supervisord.conf
ExecStop= /usr/bin/supervisorctl shutdown 
ExecReload=/usr/bin/supervisorctl reload
Restart=on-failure
RestartSec=42s
KillMode=process 
[Install]
WantedBy=multi-user.target
# nginx.service服务文件
[Unit]
Description=nginx - high performance web server
After=network.target remote-fs.target nss-lookup.target

[Service]
Type=forking
ExecStart=/usr/local/nginx/sbin/nginx -c /usr/local/nginx/conf/nginx.conf
ExecReload=/usr/local/nginx/sbin/nginx -s reload
ExecStop=/usr/local/nginx/sbin/nginx -s stop

[Install]
WantedBy=multi-user.target
# redis.service服务文件
[Unit]
Description=Redis
After=network.target remote-fs.target nss-lookup.target

[Service]
Type=forking
ExecStart=/usr/local/bin/redis-server /etc/redis.conf
ExecStop=kill -INT `cat /tmp/redis.pid`
User=www
Group=www

[Install]
WantedBy=multi-user.target

https://www.cnblogs.com/zwcry/p/9602756.html

https://www.jianshu.com/p/e1442913eb0e

Linux—添加开机启动(服务/脚本)的更多相关文章

  1. (转) CentOS 7添加开机启动服务/脚本

    CentOS 7添加开机启动服务/脚本 原文:http://blog.csdn.net/wang123459/article/details/79063703 一.添加开机自启服务 在CentOS 7 ...

  2. 【centos7】添加开机启动服务/脚本

    一.添加开机自启服务 在centos7中添加开机自启服务非常方便,只需要两条命令(以Jenkins为例): systemctl enable jenkins.service #设置jenkins服务为 ...

  3. centos7之添加开机启动服务/脚本

    一.添加开机启动脚本 #!/bin/bash # THIS FILE IS ADDED FOR COMPATIBILITY PURPOSES # # It is highly advisable to ...

  4. centos7如何添加开机启动服务/脚本

    一.添加开机自启服务 在centos7中添加开机自启服务非常方便,只需要两条命令(以Jenkins为例): systemctl enable jenkins.service #设置jenkins服务为 ...

  5. CentOS7添加开机启动服务/脚本(延用CentOS6方法)

    一.添加开机自启服务 在centos7中添加开机自启服务非常方便,只需要两条命令(以Jenkins为例): systemctl enable jenkins.service #设置jenkins服务为 ...

  6. CentOS 7添加开机启动服务/脚本

    一.添加开机自启服务 在CentOS 7中添加开机自启服务非常方便,只需要两条命令(以 jenkins 为例):systemctl enable jenkins.service #设置jenkins服 ...

  7. CentOS 7添加开机启动服务脚本

    一.添加开机自启服务 在CentOS 7中添加开机自启服务非常方便,只需要两条命令(以Jenkins为例): systemctl enable jenkins.service #设置jenkins服务 ...

  8. linux自定义开机启动服务和chkconfig使用方法

    linux自定义开机启动服务和chkconfig使用方法 1. 服务概述在linux操作系统下,经常需要创建一些服务,这些服务被做成shell脚本,这些服务需要在系统启动的时候自动启动,关闭的时候自动 ...

  9. (转)linux自定义开机启动服务和chkconfig使用方法

    原文:https://www.cnblogs.com/jimeper/archive/2013/03/12/2955687.html linux自定义开机启动服务和chkconfig使用方法 1. 服 ...

随机推荐

  1. 一种简单的REST API接口加密实现,只允许自己的产品调用后台,防止接口被刷

    在项目上线后,后台接口很容易通过抓包工具看到, 难免被人为构造恶意请求攻击我们的系统,相信大家都或多或少都遇到过短信验证码被刷.疯狂留言灌水.数据被恶意爬取等问题,这种直接抓接口然后写个循环调用的行为 ...

  2. Android ndk 加载简单的gif 图像

    首先获取一个安卓权限 <uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE"> ...

  3. 【Nginx】安装&环境配置

    安装依赖包 安装make:yum -y install gcc automake autoconf libtool make 安装g++:yum -y install gcc gcc-c++ 安装pc ...

  4. 25个JavaScript数组方法代码示例

    摘要: 通过代码掌握数组方法. 原文:通过实现25个数组方法来理解及高效使用数组方法(长文,建议收藏) 译者:前端小智 Fundebug经授权转载,版权归原作者所有. 要在给定数组上使用方法,只需要通 ...

  5. 通过官网模板轻松实现Grafana的可视化界面配置(以MySQL监控项为例)

    我们知道可视化是监控的一个重要环节,所以往往我们这个环节花费大量的时间和精力.可是如果可以借鉴前辈的经验和成果,可以事半功倍.Grafana 有着非常漂亮的图表和布局展示,功能齐全的度量仪表盘和图形编 ...

  6. 小程序npm(初级篇)

    小程序npm NPM是随同NodeJS一起安装的包管理工具,能解决NodeJS代码部署上的很多问题,常见的使用场景有以下几种: 允许用户从NPM服务器下载别人编写的第三方包到本地使用. 允许用户从NP ...

  7. Python:判断列表中含有字符串且组成新的列表打印输出-Dotest董浩

    '''题一:判断列表中含有字符串且组成新的列表打印输出知识点:列表.列表的增删改查.for循环.if判断'''#@Author:Dotest软件测试#@QQ:1274057839names = ['D ...

  8. 机器学习实战之KNN

    KNN也称K-近邻算法,简单来说,KNN采用测量不同特征值之间的距离的方法进行分类. 优点:精度高,对异常值不敏感,无数据输入假定. 确定:时间复杂度.空间复杂度较高 适用数据范围:数值型和标称型 工 ...

  9. 201871010113-刘兴瑞《面向对象程序设计(java)》第十周学习总结

    项目 内容 这个作业属于哪个课程 <任课教师博客主页链接> https://www.cnblogs.com/nwnu-daizh/ 这个作业的要求在哪里 <作业链接地址>htt ...

  10. mock 模拟数据在框架中的简单使用

    首先在框架中需要安装mock模块 cnpm i mockjs -S 其次在src文件夹下新建mock文件夹,在mock文件夹中新建一个index.js文件 代码如下: const Mock = req ...