Set-DnsServerGlobalQueryBlockList
Set-DnsServerGlobalQueryBlockList
Updated: May 4, 2015
Set-DnsServerGlobalQueryBlockList
Syntax
Parameter Set: Set1
Set-DnsServerGlobalQueryBlockList [[-List] <String[]> ] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-Enable <Boolean> ] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]
Detailed Description
The Set-DnsServerGlobalQueryBlockList cmdlet changes settings of a global query block list on a Domain Name System (DNS) server. This cmdlet replaces all names in the list of names that the DNS server does not resolve with the names that you specify.
If you need the DNS server to resolve names such as ISATAP and WPAD, remove these names from the list. Web Proxy Automatic Discovery Protocol (WPAD) and Intra-site Automatic Tunnel Addressing Protocol (ISATAP) are two commonly deployed protocols that are particularly vulnerable to hijacking.
Parameters
-CimSession<CimSession[]>
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSessioncmdlet. The default is the current session on the local computer.
Aliases |
Session |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-ComputerName<String>
Specifies a remote DNS server. You can specify an IP address or any value that resolves to an IP address, such as a fully qualified domain name (FQDN), host name, or NETBIOS name.
Aliases |
Cn |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-Enable<Boolean>
Specifies whether the server enables support for the global query block list that blocks name resolution for names in the list. The DNS Server service creates and enables the global query block list by default the first time that the service starts.
When you disable the global query block list, the DNS Server service responds to queries for names in the block list. When you enable the global query block list, the DNS Server service does not respond to queries for names in the block list.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
True (ByPropertyName) |
Accept Wildcard Characters? |
false |
-InformationAction<System.Management.Automation.ActionPreference>
Aliases |
infa |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-InformationVariable<System.String>
Aliases |
iv |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-List<String[]>
Specifies an array of host names.
This cmdlet replaces the current global query block list with a list of the names that you specify. To add a name to the list, you must also include all existing names in the list. If you do not specify any names, the cmdlet clears the block list.
By default, the global query block list contains the following items: ISATAP and WPAD. The DNS Server service removes these names when it starts the first time if it finds these names in an existing zone. If you need the DNS server to resolve names such as ISATAP and WPAD, remove them from the list.
Aliases |
none |
Required? |
false |
Position? |
2 |
Default Value |
none |
Accept Pipeline Input? |
True (ByPropertyName) |
Accept Wildcard Characters? |
false |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-ThrottleLimit<Int32>
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0
is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-Confirm
Prompts you for confirmation before running the cmdlet.
Required? |
false |
Position? |
named |
Default Value |
false |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? |
false |
Position? |
named |
Default Value |
false |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
<CommonParameters>
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
<WorkflowParameters>
This cmdlet supports the following workflow common parameters: -PSParameterCollection, -PSComputerName, -PSCredential, -PSConnectionRetryCount, -PSConnectionRetryIntervalSec, -PSRunningTimeoutSec, -PSElapsedTimeoutSec, -PSPersist, -PSAuthentication, -PSAuthenticationLevel, -PSApplicationName, -PSPort, -PSUseSSL, -PSConfigurationName, -PSConnectionURI, -PSAllowRedirection, -PSSessionOption, -PSCertificateThumbprint, -PSPrivateMetadata, -AsJob, -JobName, and –InputObject. For more information, see about_WorkflowCommonParameters.
Inputs
The input type is the type of the objects that you can pipe to the cmdlet.
{
boolean EnableGlobalQueryBlockList; //Enables or disables support for the global query block list that blocks name resolution for names in the list. The DNS Server service creates and enables the global query block list by default when the service starts the first time.
string[] Names; //Replaces the current global query block list with a list of the names that you specify. If you do not specify any names, this command clears the block list.
}
Outputs
The output type is the type of the objects that the cmdlet emits.
Examples
Example 1: Replace the names in a global query block list
This command replaces the existing host names in a global query block list that has the host name Isatap.
PS C:\> Set-DnsServerGlobalQueryBlockList -List "Isatap" -PassThru -Verbose
Related topics
Set-DnsServerGlobalQueryBlockList的更多相关文章
随机推荐
- codevs 原创抄袭题 5969 [AK]刻录光盘
题目描述 Description • 在FJOI2010夏令营快要结束的时候,很多营员提出来要把整个夏令营期间的资料刻录成一张光盘给大家,以便大家回去后继续学习.组委会觉得这个主意不错!可是组委会一时 ...
- css 选择器 & UI元素的伪类选择器 & 伪元素选择器
UI元素的伪类选择器 1. :focus 用来选取获取焦点事件 2. :enabled 用来指定当元素处于可用状态时的样式 3. :disable 用来指定元素处于不可用时的状态 表单里应用 ...
- 实现Hbase的分页
作者:R星月 出处:http://www.cnblogs.com/rxingyue 欢迎转载,也请保留这段声明.谢谢! 做一个项目中由于数据量比较大,并且需要定时增量分析,做了hbase的分页.项目中 ...
- python __getattr__ __setattr__
class Rectangle: def __init__(self): self.width = 0 self.height = 0 def __setattr__(self, key, value ...
- SQLyog点击“测试连接”后,报2058错误
问题:安装MySQL和SQLyog之后,在SQLyog中点击“测试连接”时,报2058错误. 解决:这里要确定两个问题:1 MySQL是否配置了环境变量:2 如果配置了MySQL环境变量,那么需要在c ...
- 1207: [HNOI2004]打鼹鼠
Time Limit: 10 Sec Memory Limit: 162 MBSubmit: 4154 Solved: 1997[Submit][Status][Discuss] Descript ...
- leetcode笔记(一)309. Best Time to Buy and Sell Stock with Cooldown
题目描述 (原题目链接) Say you have an array for which the ith element is the price of a given stock on day i. ...
- JDK和CGLIB动态代理原理区别
JDK和CGLIB动态代理原理区别 https://blog.csdn.net/yhl_jxy/article/details/80635012 2018年06月09日 18:34:17 阅读数:65 ...
- Mysql--数据定义语言(DDL)
DDL(Data Definition languages)数据定义语言,这些语句主要定义了不同的数据段,数据表.列.索引等操作,主要关键字有create.drop.alter. 一. 数据库的操作 ...
- 短信验证码js
var isSmsSend = false; function clickButtona(obj){ var obj = $(obj); var mobile=$("input[name=m ...