https://blog.csdn.net/weixin_42350212/article/details/81123932

Nginx 处理的每个请求均有相应的超时设置。如果做好这些超时时间的限定,判定超时后资源被释放,用来处理其他的请求,以此提升 Nginx 的性能。

keepalive_timeout

HTTP 是一种无状态协议,客户端向服务器发送一个 TCP 请求,服务端响应完毕后断开连接。

如果客户端向服务器发送多个请求,每个请求都要建立各自独立的连接以传输数据。

HTTP 有一个 KeepAlive 模式,它告诉 webserver 在处理完一个请求后保持这个 TCP 连接的打开状态。若接收到来自客户端的其它请求,服务端会利用这个未被关闭的连接,而不需要再建立一个连接。

KeepAlive 在一段时间内保持打开状态,它们会在这段时间内占用资源。占用过多就会影响性能。

Nginx 使用 keepalive_timeout 来指定 KeepAlive 的超时时间(timeout)。指定每个 TCP 连接最多可以保持多长时间。Nginx 的默认值是 75 秒,有些浏览器最多只保持 60 秒,所以可以设定为 60 秒。若将它设置为 0,就禁止了 keepalive 连接。

1

2

# 配置段: http, server, location

keepalive_timeout 60s;

client_body_timeout

指定客户端与服务端建立连接后发送 request body 的超时时间。如果客户端在指定时间内没有发送任何内容,Nginx 返回 HTTP 408(Request Timed Out)。

1

2

# 配置段: http, server, location

client_body_timeout 20s;

client_header_timeout

客户端向服务端发送一个完整的 request header 的超时时间。如果客户端在指定时间内没有发送一个完整的 request header,Nginx 返回 HTTP 408(Request Timed Out)。

?

1

2

# 配置段: http, server, location

client_header_timeout 10s;

send_timeout

服务端向客户端传输数据的超时时间。

1

2

# 配置段: http, server, location

send_timeout 30s;

客户度连接nginx超时, 建议5s内

接收客户端header超时, 默认60s, 如果60s内没有收到完整的http包头, 返回408

1

2

3

4

5

6

Syntax: client_header_timeout time;

Default: 

client_header_timeout 60s;

Context:  http, server

Defines a timeout for reading client request header. If a client does not transmit the entire header within this time,

the 408 (Request Time-out) error is returned to the client.

接收客户端body超时, 默认60s, 如果连续的60s内没有收到客户端的1个字节, 返回408

1

2

3

4

5

6

7

Syntax: client_body_timeout time;

Default: 

client_body_timeout 60s;

Context:  http, server, location

Defines a timeout for reading client request body. The timeout is set only for a period between two successive read operations, not for the transmission of the whole request body.

If a client does not transmit anything within this time,

the 408 (Request Time-out) error is returned to the client.

keepalive时间,默认75s,通常keepalive_timeout应该比client_body_timeout大

1

2

3

4

5

6

Syntax: keepalive_timeout timeout [header_timeout];

Default: 

keepalive_timeout 75s;

Context:  http, server, location

The first parameter sets a timeout during which a keep-alive client connection will stay open on the server side. The zero value disables keep-alive client connections.

The optional second parameter sets a value in the “Keep-Alive: timeout=time” response header field. Two parameters may differ.

The “Keep-Alive: timeout=time” header field is recognized by Mozilla and Konqueror. MSIE closes keep-alive connections by itself in about 60 seconds.

可以理解为TCP连接关闭时的SO_LINGER延时设置,默认5s

1

2

3

4

5

6

7

Syntax: lingering_timeout time;

Default: 

lingering_timeout 5s;

Context:  http, server, location

When lingering_close is in effect, this directive specifies the maximum waiting time for more client data to arrive. If data are not received during this time,

the connection is closed. Otherwise, the data are read and ignored, and nginx starts waiting for more data again.

The “wait-read-ignore” cycle is repeated, but no longer than specified by the lingering_time directive.

域名解析超时,默认30s

1

2

3

4

5

6

Syntax: resolver_timeout time;

Default: 

resolver_timeout 30s;

Context:  http, server, location

Sets a timeout for name resolution, for example:

resolver_timeout 5s;

发送数据至客户端超时, 默认60s, 如果连续的60s内客户端没有收到1个字节, 连接关闭

1

2

3

4

5

6

Syntax: send_timeout time;

Default: 

send_timeout 60s;

Context:  http, server, location

Sets a timeout for transmitting a response to the client. The timeout is set only between two successive write operations,

not for the transmission of the whole response. If the client does not receive anything within this time, the connection is closed.

nginx与upstream server的连接超时时间

1

2

3

4

5

Syntax: proxy_connect_timeout time;

Default: 

proxy_connect_timeout 60s;

Context:  http, server, location

Defines a timeout for establishing a connection with a proxied server. It should be noted that this timeout cannot usually exceed 75 seconds.

nginx接收upstream server数据超时, 默认60s, 如果连续的60s内没有收到1个字节, 连接关闭

1

2

3

4

5

6

Syntax: proxy_read_timeout time;

Default: 

proxy_read_timeout 60s;

Context:  http, server, location

Defines a timeout for reading a response from the proxied server. The timeout is set only between two successive read operations,

not for the transmission of the whole response. If the proxied server does not transmit anything within this time, the connection is closed.

nginx发送数据至upstream server超时, 默认60s, 如果连续的60s内没有发送1个字节, 连接关闭

1

2

3

4

5

6

Syntax: proxy_send_timeout time;

Default: 

proxy_send_timeout 60s;

Context:  http, server, location

Sets a timeout for transmitting a request to the proxied server. The timeout is set only between two successive write operations,

not for the transmission of the whole request. If the proxied server does not receive anything within this time, the connection is closed.

转:Nginx的超时keeplive_timeout配置详解的更多相关文章

  1. [转帖]Nginx的超时keeplive_timeout配置详解

    Nginx的超时keeplive_timeout配置详解 https://blog.csdn.net/weixin_42350212/article/details/81123932   Nginx  ...

  2. Nginx的超时timeout配置详解

    Nginx的超时timeout配置详解 本文介绍 Nginx 的 超时(timeout)配置. Nginx 处理的每个请求均有相应的超时设置.如果做好这些超时时间的限定,判定超时后资源被释放,用来处理 ...

  3. Nginx + Tomcat 负载均衡配置详解

    Nginx常用操作指南一.Nginx 与 Tomcat 安装.配置及优化1. 检查和安装依赖项 yum -y install gcc pcre pcre-devel zlib zlib-devel o ...

  4. nginx安装升级及配置详解

    1.简介 2.安装配置 3.配置文件介绍 4.启动.停止.平滑重启.升级 一.Nginx简介 Nginx(engine x)是俄罗斯人Igor Sysoev编写的一款高性能的http和反向代理服务器. ...

  5. 学习计划 nginx 中 php的配置详解

    本章只看一个刚下载的nginx是如何支持php的 -- location ~ \.php$ { root html; fastcgi_pass 127.0.0.1:9000; fastcgi_inde ...

  6. nginx 源码安装配置详解(./configure)

    在"./configure"配置中,"--with"表示启用模块,也就是说这些模块在编译时不会自动构建,"--without"表示禁用模块, ...

  7. Nginx实现跨域配置详解

    主要给大家介绍了关于Nginx跨域使用字体文件的相关内容,分享出来供大家参考学习,下面来一起看看详细的介绍: 问题描述 今天在使用子域名访问根域名的CSS时,发现字体无法显示,在确保CSS和Font字 ...

  8. nginx在linux上的安装与配置详解(一)

    Nginx的安装与配置详解 (1)nginx简介     nginx概念: Nginx是一款轻量级的Web 服务器/反向代理服务器及电子邮件(IMAP/POP3)代理服务器,并在一个BSD-like ...

  9. Nginx配置文件(nginx.conf)配置详解(2)

    Nginx的配置文件nginx.conf配置详解如下: user nginx nginx ; Nginx用户及组:用户 组.window下不指定 worker_processes 8; 工作进程:数目 ...

随机推荐

  1. Spring Security教程(二):自定义数据库查询

    Spring Security教程(二):自定义数据库查询   Spring Security自带的默认数据库存储用户和权限的数据,但是Spring Security默认提供的表结构太过简单了,其实就 ...

  2. 5_2 木块问题(UVa101)<vector的使用>

    [背景] 在计算机科学中的很多地方都会使用简单,抽象的方法来做分析和实验验究.比如在早期的规划学和机器人学的人工智能研究就利用一个积木世界,让机械臂执行操作积木的任务. 在这个问题中,你将在确定的规则 ...

  3. Vue 项目中使用less

    首先 你得有 完整的 Vue开发环境第一步 安装less 依赖 npm install less less-loader --save 第二步 修改webpack.config.js文件,配置load ...

  4. CSS水平垂直居中常见方法总结

    1.元素水平居中 当然最好使的是: margin: 0 auto; 居中不好使的原因: 1.元素没有设置宽度,没有宽度怎么居中嘛! 2.设置了宽度依然不好使,你设置的是行内元素吧,行内元素和块元素的区 ...

  5. Python学习第二十四课——Mysql 外键约束

    外键:主要是关联两个表的 举个栗子:在建表中创建外键 -- 添加外键例子 CREATE TABLE teacher( id TINYINT PRIMARY KEY auto_increment, na ...

  6. IDEA & MAVEN配置代理(没用)

    1. IDEA配置代理: 2. maven配置代理: 在maven中配置代理,主要配置编辑~/.m2/settings.xml文件的<proxies> socks5类型: <id&g ...

  7. Update(Stage4):sparksql:第1节 SparkSQL_使用场景_优化器_Dataset & 第2节 SparkSQL读写_hive_mysql_案例

    目标 SparkSQL 是什么 SparkSQL 如何使用 Table of Contents 1. SparkSQL 是什么 1.1. SparkSQL 的出现契机 1.2. SparkSQL 的适 ...

  8. inode节点使用率过大处理

    当发现某个分区下的inode使用率过大时,需要找到该分区下的某些目录里有哪些文件可以清理. 查找某个目录下一个月或两个月之前的文件,然后删除# find . -type f -mtime +30 |w ...

  9. 解决springmvc拦截器拦截静态资源的两种方式

    1.是采用<mvc:default-servlet-handler />,(一般Web应用服务器默认的Servlet名称是"default",所以这里我们激活Tomca ...

  10. IDEA工具java开发之 代码重构Refactor 重命名 删除移动复制 生成变量 抽取方法

    一.重命名 用shift + F6 或者右键单击 二.抽取方法 .三.生成变量 . 四.文件移动复制和删除 可以右键