导读 如果你经常使用 Linux 命令行,那么使用 history(历史)命令可以有效地提升你的效率,本文将通过实例的方式向你介绍 history 命令的 15 个用法。

使用 HISTTIMEFORMAT 显示时间戳

当你从命令行执行 history 命令后,通常只会显示已执行命令的序号和命令本身,如果你想要查看命令历史的时间戳,那么可以执行:

# export HISTTIMEFORMAT='%F %T '
# history | more
1 2008-08-05 19:02:39 service network restart
2 2008-08-05 19:02:39 exit
3 2008-08-05 19:02:39 id
4 2008-08-05 19:02:39 cat /etc/redhat-release

注意:这个功能只能用在当 HISTTIMEFORMAT 这个环境变量被设置之后的那些新执行的 bash 命令才会被打上正确的时间戳。在此之前的所有命令,都将会显示成设置 HISTTIMEFORMAT 变量的时间。

使用 Ctrl+R 搜索历史

Ctrl+R 是我经常使用的一个快捷键,此快捷键让你对命令历史进行搜索,对于想要重复执行某个命令的时候非常有用。当找到命令后,通常再按回车键就可以执行pre该命令,如果想对找到的命令进行调整后再执行,则可以按一下左或右方向键。

# [Press Ctrl+R from the command prompt, which will display the reverse-i-search prompt]
(reverse-i-search)`red‘: cat /etc/redhat-release
[Note: Press enter when you see your command, which will execute the command from the history]
# cat /etc/redhat-release
Fedora release 9 (Sulphur)
快速重复执行上一条命令

有 4 种方法可以重复执行上一条命令:

1.使用上方向键,并回车执行。
2.按 !! 并回车执行。
3.输入 !-1 并回车执行。
4.按 Ctrl+P 并回车执行。

从命令历史中执行一个指定的命令

在下面的例子中,如果你想重复执行第 4 条命令,那么可以执行 !4:

# history | more
1 service network restart
2 exit
3 id
4 cat /etc/redhat-release
# !4
cat /etc/redhat-release
Fedora release 9 (Sulphur)
通过指定关键字来执行以前的命令

在下面的例子,输入 !ps 并回车,将执行以 ps 打头的命令:

# !ps
ps aux | grep yp
root 16947 0.0 0.1 36516 1264 ? Sl 13:10 0:00 ypbind
root 17503 0.0 0.0 4124 740 pts/0 S+ 19:19 0:00 grep yp
使用 HISTSIZE 控制历史命令记录的总行数

将下面两行内容追加到 .bash_profile 文件并重新登录 bash shell,命令历史的记录数将变成 450 条:

# vi ~/.bash_profile
HISTSIZE=450
HISTFILESIZE=450
使用 HISTFILE 更改历史文件名称

默认情况下,命令历史存储在 ~/.bash_history 文件中,添加下列内容到 .bash_profile 文件并重新登录 bash shell,将使用 .commandline_warrior 来存储命令历史:

# vi ~/.bash_profile
HISTFILE=/root/.commandline_warrior
使用 HISTCONTROL 从命令历史中剔除连续重复的条目

在下面的例子中,pwd 命令被连续执行了三次。执行 history 后你会看到三条重复的条目,要剔除这些重复的条目,你可以将 HISTCONTROL 设置为 ignoredups:

# pwd
# pwd
# pwd
# history | tail -4
44 pwd
45 pwd
46 pwd [Note that there are three pwd commands in history, after executing pwd 3 times as shown above]
47 history | tail -4
# export HISTCONTROL=ignoredups
# pwd
# pwd
# pwd
# history | tail -3
56 export HISTCONTROL=ignoredups
57 pwd [Note that there is only one pwd command in the history, even after executing pwd 3 times as shown above]
58 history | tail -4
使用 HISTCONTROL 清除整个命令历史中的重复条目

上例中的 ignoredups 只能剔除连续的重复条目,要清除整个命令历史中的重复条目,可以将 HISTCONTROL 设置成 erasedups:

# export HISTCONTROL=erasedups
# pwd
# service httpd stop
# history | tail -3
38 pwd
39 service httpd stop
40 history | tail -3
# ls -ltr
# service httpd stop
# history | tail -6
35 export HISTCONTROL=erasedups
36 pwd
37 history | tail -3
38 ls -ltr
39 service httpd stop
[Note that the previous service httpd stop after pwd got erased]
40 history | tail -6
使用 HISTCONTROL 强制 history 不记住特定的命令

将 HISTCONTROL 设置为 ignorespace,并在不想被记住的命令前面输入一个空格:

# export HISTCONTROL=ignorespace
# ls -ltr
# pwd
# service httpd stop [Note that there is a space at the beginning of service, to ignore this command from history]
# history | tail -3
67 ls -ltr
68 pwd
69 history | tail -3
使用 -c 选项清除所有的命令历史

如果你想清除所有的命令历史,可以执行:

# history -c
命令替换

在下面的例子里,!!:$ 将为当前的命令获得上一条命令的参数:

# ls anaconda-ks.cfg
anaconda-ks.cfg
# vi !!:$
vi anaconda-ks.cfg

补充:使用 !$ 可以达到同样的效果,而且更简单。下例中,!^ 从上一条命令获得第一项参数:

# cp anaconda-ks.cfg anaconda-ks.cfg.bak
anaconda-ks.cfg
# vi -5 !^
vi anaconda-ks.cfg
为特定的命令替换指定的参数

在下面的例子,!cp:2 从命令历史中搜索以 cp 开头的命令,并获取它的第二项参数:

# cp ~/longname.txt /really/a/very/long/path/long-filename.txt
# ls -l !cp:2
ls -l /really/a/very/long/path/long-filename.txt

下例里,!cp:$ 获取 cp 命令的最后一项参数:

# ls -l !cp:$
ls -l /really/a/very/long/path/long-filename.txt
使用 HISTSIZE 禁用 history

如果你想禁用 history,可以将 HISTSIZE 设置为 0:

# export HISTSIZE=0
# history
# [Note that history did not display anything]
使用 HISTIGNORE 忽略历史中的特定命令

下面的例子,将忽略 pwd、ls、ls -ltr 等命令:

# export HISTIGNORE=”pwd:ls:ls -ltr:”
# pwd
# ls
# ls -ltr
# service httpd stop
# history | tail -3
79 export HISTIGNORE=”pwd:ls:ls -ltr:”
80 service httpd stop
81 history
[Note that history did not record pwd, ls and ls -ltr]

免费提供最新Linux技术教程书籍,为开源技术爱好者努力做得更多更好:https://www.linuxprobe.com/

History(历史)命令用法15例的更多相关文章

  1. [转] Linux History(历史)命令用法 15 例

    [From]https://linuxtoy.org/archives/history-command-usage-examples.html 如果你经常使用 Linux 命令行,那么使用 histo ...

  2. History(历史)命令用法 15 例

    如果你经常使用 Linux 命令行,那么使用 history(历史)命令可以有效地提升你的效率.本文将通过实例的方式向你介绍 history 命令的 15 个用法. 使用 HISTTIMEFORMAT ...

  3. History命令用法15例

    以下内容为转载: 如果你经常使用 Linux 命令行,那么使用 history(历史)命令可以有效地提升你的效率.本文将通过实例的方式向你介绍 history 命令的 15 个用法. 使用 HISTT ...

  4. 【转】Linux中history历史命令使用方法详解

    原文网址:http://os.51cto.com/art/201205/335040.htm 当你在玩Linux的时候,如果你经常使用命令行来控制你的Linux系统,那么有效地使用命令历史机制将会使效 ...

  5. Linux中history历史命令使用方法详解

    当你在玩Linux的时候,如果你经常使用命令行来控制你的Linux系统,那么有效地使用命令历史机制将会使效率获得极大提升.事实上,一旦你掌 握了我在下面给出的15个有关Linux history历史命 ...

  6. linux 历史命令用法(转)

    许多使用过Linux一段时间的人通过一些基础操作已经能够把Linux各方面基本玩转,但是如果没有经过系统学习的话就容易缺乏一些实战技巧.这系列文章介绍一些关于bash的能够提高效率的技巧,主要是关于历 ...

  7. wmic命令用法小例

    wmic就是wmic.exe,位于windows目录底下,是一个命令行程序.WMIC可以以两种模式执行:交互模式(Interactive mode)和非交互模式(Non-Interactive mod ...

  8. Linux修改History历史命令数量

    ****打开  vim  /etc/profile vim  /etc/profile 追加配置 # /etc/profile: system-wide .profile file for the B ...

  9. History(历史)命令用法

    如果你经常使用 Linux 命令行,那么使用 history(历史)命令可以有效地提升你的效率.本文将通过实例的方式向你介绍 history 命令的用法. 使用 HISTTIMEFORMAT 显示时间 ...

随机推荐

  1. 【boost】BOOST_LOCAL_FUNCTION体验

    c++11里支持使用lambda在函数内定义本地嵌套函数,将一些算法的判断式定义为本地函数可以使代码更加清晰,同时声明和调用靠近也使得更容易维护.遗憾的是公司开发平台任然停留在vs2008,使用boo ...

  2. EF selection expression 与 Linq备忘

    一.左连接查询 var query = people.GroupJoin(pets, person => person, pet => pet.Owner, (person, petCol ...

  3. 第三百二十四天 how can I 坚持

    下午去打了会篮球,好累,又把android开发环境搭建起来了,明天把天气应用搞起来. 今天老妈打电话说昨晚梦到我小时候了.. 是啊,都这么大了,不能让他们老操心了. 过两天买根鱼竿去钓鱼. 睡觉.

  4. 关于Ext.NET Demo程序在IIS7.5部署出现"Ext未定义"的解决方案

    有以下三点 1.应用程序池请用ASP.NET4.0经典模式 2.安装ASP.NET   控制面板-->程序和功能-->打开或关闭WIndows功能-->Internet信息服务--& ...

  5. Live m3u8播放3个文件自动停止问题

    Live m3u8播放3个文件自动停止问题 1.问题描述 最近做一个转码切片播放测试,使用HLS(HTTP Live Streaming)来做直播, 每个TS分片时间为10s,根据TS分片文件生成以下 ...

  6. (博弈论)hdoj 1079 Calendar Game

    题目链接:http://acm.hdu.edu.cn/showproblem.php?pid=1079 题解:题目大意,两个人Adam和Eve一块儿玩游戏,游戏规则是从1900年1月1日到2001年1 ...

  7. Java读取Properties文件的六种方法

    使用J2SE API读取Properties文件的六种方法 1.使用java.util.Properties类的load()方法示例: InputStream in = lnew BufferedIn ...

  8. .Net项目版本号的生成

    给.Net项目编译的程序集加入版本号的方式有许多种,包括: 1. 默认的方式,在每个项目的AssemblyInfo.cs文件中指定版本号: // Version information for an ...

  9. mysql修改用户密码 新增用户

    修改密码: mysql> grant all privileges on *.* to yongfu_b@'192.168.1.%' identified by 'my_password_new ...

  10. 71道经典Android面试题和答案

    ,,面试题1.        下列哪些语句关于内存回收的说明是正确的? (b ) A. 程序员必须创建一个线程来释放内存  B.内存回收程序负责释放无用内存   C.内存回收程序允许程序员直接释放内存 ...