cisco常用命令详解
cisco常用命令详解
作者：尹正杰
版权声明：原创作品，谢绝转载！否则将追究法律责任。
一.常用命令用法展示
1.命令行模式的来回切换
yinzhengjie>enable #从用户模式切换到特权模式，权限最低，可以说是无功能，啥也不能做。
yinzhengjie# #特权模式，可以进行查看端口的IP配置信息，查看主机表等，重启路由器等等操作。 yinzhengjie#configure terminal #从特权模式切换到全局配置模式，权限最高，可以在这里配置vlan等等
Enter configuration commands, one per line. End with CNTL/Z.
yinzhengjie(config)# yinzhengjie(config)#exit #从全局配置模式切换到特权模式，如果想要切换到用户模式继续敲击exit即可。
yinzhengjie#
%SYS--CONFIG_I: Configured from console by console
3种模式的来回切换
2.修改主机名
(config)#hostname yinzhengjie #注意：需要在全局配置模式下敲击哟
yinzhengjie(config)#
全局配置模式下修改主机名
3.配置用户切换至特权模式的密码
yinzhengjie(config)#enable password yinzhengjie #配置在用户模式进入特权模式的密码是：yinzhengjie， 但是这种配置方法可以通过show run来进行查看
yinzhengjie(config)# yinzhengjie>enable #验证过程,注意，
Password:
yinzhengjie# #可以在特权模式下查看你做了哪些配置
yinzhengjie#show run
Building configuration... Current configuration : bytes
!
version 12.2
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname yinzhengjie
!
!
!
enable password yinzhengjie #这个就是进入特权模式的密码
明文加密特权模式密码
yinzhengjie(config)#enable secret yinzhengjie #配置用户模式进入特权模式的密码，且是密文形式的，不会被show run看出来密码。
yinzhengjie(config)#exit
yinzhengjie#
%SYS--CONFIG_I: Configured from console by console yinzhengjie#show run
Building configuration... Current configuration : bytes
!
version 12.2
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname yinzhengjie
!
!
!
enable secret $$mERr$m71c3Gjeqb4tpumB3.jHY. #这种加密是无法被看到的哟
密文加密特权模式密码
4.查看命令用法
yinzhengjie#show hosts #查看主机表
Default Domain is not set
Name/address lookup uses domain service
Name servers are 255.255.255.255 Codes: UN - unknown, EX - expired, OK - OK, ?? - revalidate
temp - temporary, perm - permanent
NA - Not Applicable None - Not defined Host Port Flags Age Type Address(es)
yinzhengjie# yinzhengjie#show ip interface #查看端口的IP配置信息
FastEthernet0/ is administratively down, line protocol is down (disabled)
Internet protocol processing disabled
FastEthernet0/ is administratively down, line protocol is down (disabled)
Internet protocol processing disabled
yinzhengjie#
常用查询命令
5.VLAN的创建与删除
yinzhengjie#vlan data #进入VLAN配置模式
% Warning: It is recommended to configure VLAN from config mode,
as VLAN database mode is being deprecated. Please consult user
documentation for configuring VTP/VLAN in config mode. yinzhengjie(vlan)#vlan name test_1 #创建VLAN10并其名称为test_1
VLAN added: #输出信息，创建VLAN10
Name: test_1 #输出信息，名称为test_1
yinzhengjie(vlan)#vlan name test_2 #创建VLAN20
VLAN added:
Name: test_2
yinzhengjie(vlan)#vlan name test_3 #创建VLAN30
VLAN added:
Name: test_3
yinzhengjie(vlan) 思科VLAN的创建
VLAN的添加
yinzhengjie#show vlan brief #查看VLAN信息 VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
default active Fa0/, Fa0/, Fa0/, Fa0/
Fa0/, Fa0/, Fa0/, Fa0/
Fa0/, Fa0/, Fa0/, Fa0/
Fa0/, Fa0/, Fa0/, Fa0/
Fa0/, Fa0/, Fa0/, Fa0/
Fa0/, Fa0/, Fa0/, Fa0/
test_1 active #之前已经存在的VLAN
test_2 active #之前已经存在的VLAN
test_3 active #之前已经存在的VLAN
fddi-default active
token-ring-default active
fddinet-default active
trnet-default active
yinzhengjie#
yinzhengjie#vlan database #进入VLAN的配置模式
% Warning: It is recommended to configure VLAN from config mode,
as VLAN database mode is being deprecated. Please consult user
documentation for configuring VTP/VLAN in config mode. yinzhengjie(vlan)#no vlan #删除VLAN10
Deleting VLAN ...
yinzhengjie(vlan)#no vlan #删除VLAN20
Deleting VLAN ...
yinzhengjie(vlan)#exit
APPLY completed.
Exiting....
yinzhengjie#show vlan brief VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
default active Fa0/, Fa0/, Fa0/, Fa0/
Fa0/, Fa0/, Fa0/, Fa0/
Fa0/, Fa0/, Fa0/, Fa0/
Fa0/, Fa0/, Fa0/, Fa0/
Fa0/, Fa0/, Fa0/, Fa0/
Fa0/, Fa0/, Fa0/, Fa0/
test_3 active #只剩下VLAN30了，10和20都被删除了
fddi-default active
token-ring-default active
fddinet-default active
trnet-default active
yinzhengjie#
VLAN的删除
6.将交换机的接口添加或删除到VLAN之中
yinzhengjie#show vlan brief #查看VLAN信息 VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
default active Fa0/, Fa0/, Fa0/, Fa0/
Fa0/, Fa0/, Fa0/, Fa0/
Fa0/, Fa0/, Fa0/, Fa0/
Fa0/, Fa0/, Fa0/, Fa0/
Fa0/, Fa0/, Fa0/, Fa0/
Fa0/, Fa0/, Fa0/, Fa0/
test_3 active #当前VLAN30是没用任何的接口在这个VLAN之中的
fddi-default active
token-ring-default active
fddinet-default active
trnet-default active
yinzhengjie#configure terminal
Enter configuration commands, one per line. End with CNTL/Z. yinzhengjie(config)#interface fastEthernet / #只进入f0/1接口
yinzhengjie(config-if)#switchport access vlan #将该接口下允许VLAN30通过
yinzhengjie(config-if)#exit #退出当前接口
yinzhengjie(config)#interface range fastEthernet /- #同时进入f0/2到f0/5的接口
yinzhengjie(config-if-range)#switchport access vlan #允许vlan30通过
yinzhengjie(config-if-range)#exit
yinzhengjie(config)#exit #退到特权模式中
yinzhengjie#
%SYS--CONFIG_I: Configured from console by console
yinzhengjie#show vlan brief VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
default active Fa0/, Fa0/, Fa0/, Fa0/
Fa0/, Fa0/, Fa0/, Fa0/
Fa0/, Fa0/, Fa0/, Fa0/
Fa0/, Fa0/, Fa0/, Fa0/
Fa0/, Fa0/, Fa0/
test_3 active Fa0/, Fa0/, Fa0/, Fa0/
Fa0/ #观察发现，f0/1到f0/5都从vlan1中跑到了vlan30中去了
fddi-default active
token-ring-default active
fddinet-default active
trnet-default active
yinzhengjie#
配置access口
yinzhengjie#show vlan brief VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
default active Fa0/, Fa0/, Fa0/, Fa0/
Fa0/, Fa0/, Fa0/, Fa0/
Fa0/, Fa0/, Fa0/, Fa0/
Fa0/, Fa0/, Fa0/, Fa0/
Fa0/, Fa0/, Fa0/
test_3 active Fa0/, Fa0/, Fa0/, Fa0/
Fa0/ #当前VLAN存在着5个接口
fddi-default active
token-ring-default active
fddinet-default active
trnet-default active
yinzhengjie#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
yinzhengjie(config)#interface range fastEthernet /- #同时进入f0/1到f0/5的接口之中
yinzhengjie(config-if-range)#no switchport access vlan #不允许vlan30通过
yinzhengjie(config-if-range)#exit
yinzhengjie(config)#exit
yinzhengjie#
%SYS--CONFIG_I: Configured from console by console yinzhengjie#show vlan brief VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
default active Fa0/, Fa0/, Fa0/, Fa0/
Fa0/, Fa0/, Fa0/, Fa0/
Fa0/, Fa0/, Fa0/, Fa0/
Fa0/, Fa0/, Fa0/, Fa0/
Fa0/, Fa0/, Fa0/, Fa0/
Fa0/, Fa0/, Fa0/, Fa0/
test_3 active #该VLAN的接口全部被清空了，默认被情况的接口又回到了VLAN1中去了
fddi-default active
token-ring-default active
fddinet-default active
trnet-default active
yinzhengjie#
删除access口
7.配置vlan的管理IP
yinzhengjie(config)#interface vlan #在全局配置模式进入vlan接口
yinzhengjie(config-if)#
%LINK--CHANGED: Interface Vlan10, changed state to up %LINEPROTO--UPDOWN: Line protocol on Interface Vlan10, changed state to up yinzhengjie(config-if)#ip add 192.168.10.1 255.255.255.0 #配置管理IP
yinzhengjie(config-if)#
配置管理IP
interface Vlan1
no ip address
shutdown
!
interface Vlan5
ip address 192.168.5.1 255.255.255.0
!
interface Vlan10
ip address 192.168.10.1 255.255.255.0 #我们查看当前是有IP地址的
!
line con
!
line vty
login
line vty
login
!
!
end
yinzhengjie#configure terminal #进入全局配置模式
Enter configuration commands, one per line. End with CNTL/Z.
yinzhengjie(config)#interface vlan #进入VLAN10的接口
yinzhengjie(config-if)#no ip address #情况当前vlan中的IP地址
yinzhengjie(config-if)#exit
yinzhengjie(config)#exit
yinzhengjie#
%SYS--CONFIG_I: Configured from console by console
s
% Ambiguous command: "s"
yinzhengjie#
yinzhengjie#show run #查看当前配置
Building configuration... Current configuration : bytes
!
version 12.1
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname yinzhengjie
!
!
spanning-tree mode pvst
!
interface FastEthernet0/
switchport access vlan
switchport mode trunk
!
interface FastEthernet0/
switchport access vlan
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface Vlan1
no ip address
shutdown
!
interface Vlan5
ip address 192.168.5.1 255.255.255.0
!
interface Vlan10
no ip address #此时我们发现IP被清空了
!
!
line con
!
line vty
login
line vty
login
!
!
end yinzhengjie#
删除管理IP
二.简单网络配置练习
小试牛刀：好了，学了以上的命令，我们一起来做一个简单的练习：
1.在交换机上划分vlan,将PC1、PC3加入到vlan2,PC2、PC4加入vlan3,并实现跨交换机的同vlan之间的通讯，如图－1所示：
pc0的cmd窗口测试结果如下：
PC>ipconfig FastEthernet0 Connection:(default port)
Link-local IPv6 Address.........: FE80::20B:BEFF:FEC2:A4BD
IP Address......................: 192.168.5.10
Subnet Mask.....................: 255.255.255.0
Default Gateway.................: 192.168.5.1 PC>ping 192.168.5.1 #网关地址 Pinging 192.168.5.1 with bytes of data: Reply from 192.168.5.1: bytes= time=0ms TTL=
Reply from 192.168.5.1: bytes= time=0ms TTL= Ping statistics for 192.168.5.1:
Packets: Sent = , Received = , Lost = (% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms Control-C
^C
PC>ping 192.168.5.2 #右边的交换机 Pinging 192.168.5.2 with bytes of data: Reply from 192.168.5.2: bytes= time=0ms TTL= Ping statistics for 192.168.5.2:
Packets: Sent = , Received = , Lost = (% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms Control-C
^C
PC>ping 192.168.5.20 #右边的PC机器 Pinging 192.168.5.20 with bytes of data: Reply from 192.168.5.20: bytes= time=0ms TTL= Ping statistics for 192.168.5.20:
Packets: Sent = , Received = , Lost = (% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms Control-C
^C
PC>ping 192.168.10.1 Pinging 192.168.10.1 with bytes of data: Ping statistics for 192.168.10.1:
Packets: Sent = , Received = , Lost = (% loss), Control-C
^C
PC>ping 192.168.10.10 Pinging 192.168.10.10 with bytes of data: Ping statistics for 192.168.10.10:
Packets: Sent = , Received = , Lost = (% loss), Control-C
^C
PC>
PC0测试结果
pc1的cmd窗口测试结果如下：
PC>
PC>ipconfig FastEthernet0 Connection:(default port)
Link-local IPv6 Address.........: FE80:::A3FF:FE0D:B465
IP Address......................: 192.168.10.10
Subnet Mask.....................: 255.255.255.0
Default Gateway.................: 192.168.10.1 PC>ping 192.168.10.1 #网关地址 Pinging 192.168.10.1 with bytes of data: Reply from 192.168.10.1: bytes= time=0ms TTL=
Reply from 192.168.10.1: bytes= time=0ms TTL= Ping statistics for 192.168.10.1:
Packets: Sent = , Received = , Lost = (% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms Control-C
^C
PC>ping 192.168.10.2 #右边交换机的网关地址 Pinging 192.168.10.2 with bytes of data: Reply from 192.168.10.2: bytes= time=1ms TTL= Ping statistics for 192.168.10.2:
Packets: Sent = , Received = , Lost = (% loss),
Approximate round trip times in milli-seconds:
Minimum = 1ms, Maximum = 1ms, Average = 1ms Control-C
^C
PC>ping 192.168.10.20 Pinging 192.168.10.20 with bytes of data: Reply from 192.168.10.20: bytes= time=0ms TTL=
Reply from 192.168.10.20: bytes= time=0ms TTL=
Reply from 192.168.10.20: bytes= time=0ms TTL=
Reply from 192.168.10.20: bytes= time=1ms TTL= Ping statistics for 192.168.10.20:
Packets: Sent = , Received = , Lost = (% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 1ms, Average = 0ms PC>
PC>ping 192.168.5.1 Pinging 192.168.5.1 with bytes of data: Ping statistics for 192.168.5.1:
Packets: Sent = , Received = , Lost = (% loss), Control-C
^C
PC>ping 192.168.5.2 Pinging 192.168.5.2 with bytes of data: Ping statistics for 192.168.5.2:
Packets: Sent = , Received = , Lost = (% loss), Control-C
^C
PC>ping 192.168.5.20 Pinging 192.168.5.20 with bytes of data: Ping statistics for 192.168.5.20:
Packets: Sent = , Received = , Lost = (% loss), Control-C
^C
PC>
pc1测试结果
左边交换机的配置如下：
Switch#show run
Building configuration... Current configuration : bytes
!
version 12.1
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname Switch
!
!
spanning-tree mode pvst
!
interface FastEthernet0/
!
interface FastEthernet0/
switchport access vlan
!
interface FastEthernet0/
switchport access vlan
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
switchport mode trunk
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface Vlan1
no ip address
shutdown
!
interface Vlan2
ip address 192.168.5.1 255.255.255.0
!
interface Vlan3
ip address 192.168.10.1 255.255.255.0
!
!
line con
!
line vty
login
line vty
login
!
!
end Switch#
switch3配置信息
右边交换机的配置如下：
Switch#show running-config
Building configuration... Current configuration : bytes
!
version 12.1
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname Switch
!
!
spanning-tree mode pvst
!
interface FastEthernet0/
!
interface FastEthernet0/
switchport access vlan
!
interface FastEthernet0/
switchport access vlan
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
switchport mode trunk
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface FastEthernet0/
!
interface Vlan1
no ip address
shutdown
!
interface Vlan2
ip address 192.168.5.2 255.255.255.0
!
interface Vlan3
ip address 192.168.10.2 255.255.255.0
!
interface Vlan10
no ip address
!
interface Vlan20
no ip address
!
!
line con
!
line vty
login
line vty
login
!
!
end Switch#
switch1配置信息
实现过程其实很简单只需要分别在2个交换机上创建相同的vlan，然后讲两个交换机相连的口设置为trunk口，将pc机遇交换机的直连的端口设置为access口即可。这样就实现了2个交换机中相同VLAN可以互通不同VLAM不能互通的功能，但是如果你非要让同一个交换机中的2个VLAN互通的话其实也可以的，需要在三层交换机上开启路由功能，注意：这个功能傻瓜交换机是不支持的哟！所以你要在实际生产环境中要考虑你的设备是否支持该功能哟。再去考虑交互机VLAN互通的问题。
2.配置DHCP服务器
在路由器上配置DHCP服务为客户端自动分配IP地址架构图如下：
我是在路由器上做的配置，让路由器当DHCP服务器，配置过程如下：
yinzhengjie>en #进入特权模式
yinzhengjie#configure terminal #进入全局配置模式
Enter configuration commands, one per line. End with CNTL/Z.
yinzhengjie(config)#interface fastEthernet 0/0 #进入接入的网口地址
yinzhengjie(config-if)#ip address 172.16.1.254 255.255.255.0 #为该网口配置一个网管地址
yinzhengjie(config-if)#no shutdown #开启这个端口 yinzhengjie(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up yinzhengjie(config)#ip dhcp pool wancheng #添加一个地址池起别名为“wancheng”
yinzhengjie(dhcp-config)#network 172.16.1.0 255.255.255.0 #分配地址池
yinzhengjie(dhcp-config)#default-router 172.16.1.254 #指定分配地址的网关地址
yinzhengjie(dhcp-config)#dns-server 219.141.136.10 #配置DNS服务器
yinzhengjie(dhcp-config)#exit #退出DHCP配置模式
yinzhengjie(config)#ip dhcp excluded-address 172.16.1.1 172.16.1.100 #配置预留的IP，意思是从172.16.1.1~172.16.1.100都不分配
yinzhengjie(config)#
路由器的配置过程
测试结果如下：
pc0:
pc1:
在路由器上查看目前分配IP地址的情况如下：
yinzhengjie#show run #查看配置
Building configuration... Current configuration : 602 bytes
!
version 12.2
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname yinzhengjie
!
!
!
!
ip dhcp excluded-address 172.16.1.1 172.16.1.100
!
ip dhcp pool wancheng #DHCP配置信息
network 172.16.1.0 255.255.255.0
default-router 172.16.1.254
dns-server 219.141.136.10
!
!
!
!
!
!
!
!
!
!
!
!
!
interface FastEthernet0/0
ip address 172.16.1.254 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
duplex auto
speed auto
shutdown
!
ip classless
!
!
!
!
!
!
!
line con 0
!
line aux 0
!
line vty 0 4
login
!
!
!
end yinzhengjie#show ip dhcp binding #查看当前地址的在线情况
IP address Client-ID/ Lease expiration Type
Hardware address
172.16.1.101 00E0.A357.0E96 -- Automatic
172.16.1.102 0009.7C6D.C274 -- Automatic
yinzhengjie#
查看当前地址的在线情况
3.单臂路由配置
要求VLAN20和VLAN30可以互相访问，需要在交换机设置access口（与pc机器相连）和trunk口(与路由相连)
pc0测试环境如下：
PC>ipconfig #查看本机地址 FastEthernet0 Connection:(default port)
Link-local IPv6 Address.........: FE80::2D0:BAFF:FEE4:777E
IP Address......................: 192.168.20.1
Subnet Mask.....................: 255.255.255.0
Default Gateway.................: 192.168.20.254 PC>ping 192.168.20.2 #vlan20的另外一台pc1 Pinging 192.168.20.2 with 32 bytes of data: Reply from 192.168.20.2: bytes=32 time=0ms TTL=128
Reply from 192.168.20.2: bytes=32 time=0ms TTL=128
Reply from 192.168.20.2: bytes=32 time=0ms TTL=128
Reply from 192.168.20.2: bytes=32 time=0ms TTL=128 Ping statistics for 192.168.20.2:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms PC>ping 172.16.30.254 #vlan30的网关地址 Pinging 172.16.30.254 with 32 bytes of data: Reply from 172.16.30.254: bytes=32 time=1ms TTL=255
Reply from 172.16.30.254: bytes=32 time=1ms TTL=255
Reply from 172.16.30.254: bytes=32 time=0ms TTL=255
Reply from 172.16.30.254: bytes=32 time=0ms TTL=255 Ping statistics for 172.16.30.254:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 1ms, Average = 0ms PC>ping 172.16.30.1 #VLAN30的机器 Pinging 172.16.30.1 with 32 bytes of data: Request timed out.
Reply from 172.16.30.1: bytes=32 time=0ms TTL=127
Reply from 172.16.30.1: bytes=32 time=0ms TTL=127
Reply from 172.16.30.1: bytes=32 time=0ms TTL=127 Ping statistics for 172.16.30.1:
Packets: Sent = 4, Received = 3, Lost = 1 (25% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms PC>
pc0测试结果
交换机配置如下：
yinzhengjie>en
yinzhengjie#vlan database
% Warning: It is recommended to configure VLAN from config mode,
as VLAN database mode is being deprecated. Please consult user
documentation for configuring VTP/VLAN in config mode. yinzhengjie(vlan)#vlan 20 name test_1
VLAN 20 added:
Name: test_1
yinzhengjie(vlan)#vlan 30 name test_2
VLAN 30 added:
Name: test_2
yinzhengjie(vlan)#exit
APPLY completed.
Exiting....
yinzhengjie#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
yinzhengjie(config)#interface range fastEthernet 0/1-2
yinzhengjie(config-if-range)#switchport access vlan 20
yinzhengjie(config-if-range)#exit
yinzhengjie(config)#interface range fastEthernet 0/3-4
yinzhengjie(config-if-range)#switchport access vlan 30
yinzhengjie(config-if-range)#exit
yinzhengjie(config)#interface fastEthernet 0/10
yinzhengjie(config-if)#switchport mode trunk yinzhengjie(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/10, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/10, changed state to up yinzhengjie(config-if)#
yinzhengjie(config-if)#
yinzhengjie(config-if)#
交换机配置过程
yinzhengjie#show run
Building configuration... Current configuration : 1107 bytes
!
version 12.1
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname yinzhengjie
!
!
spanning-tree mode pvst
!
interface FastEthernet0/1
switchport access vlan 20
!
interface FastEthernet0/2
switchport access vlan 20
!
interface FastEthernet0/3
switchport access vlan 30
!
interface FastEthernet0/4
switchport access vlan 30
!
interface FastEthernet0/5
!
interface FastEthernet0/6
!
interface FastEthernet0/7
!
interface FastEthernet0/8
!
interface FastEthernet0/9
!
interface FastEthernet0/10
switchport mode trunk
!
interface FastEthernet0/11
!
interface FastEthernet0/12
!
interface FastEthernet0/13
!
interface FastEthernet0/14
!
interface FastEthernet0/15
!
interface FastEthernet0/16
!
interface FastEthernet0/17
!
interface FastEthernet0/18
!
interface FastEthernet0/19
!
interface FastEthernet0/20
!
interface FastEthernet0/21
!
interface FastEthernet0/22
!
interface FastEthernet0/23
!
interface FastEthernet0/24
!
interface Vlan1
no ip address
shutdown
!
!
line con 0
!
line vty 0 4
login
line vty 5 15
login
!
!
end yinzhengjie#
交换机的配置信息
路由器配置如下：
yinzhengjie#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
yinzhengjie(config)#interface fastEthernet 0/0
yinzhengjie(config-if)#no shutdown
yinzhengjie(config-if)#exit
yinzhengjie(config)#interface fastEthernet 0/0.1
yinzhengjie(config-subif)#encapsulation dot1Q 20 #配置trunk的封装协议，如果不配置会无法配置成功IP地址的哟~
yinzhengjie(config-subif)#ip address 192.168.20.254 255.255.255.0
yinzhengjie(config-subif)#exit
yinzhengjie(config)#interface fastEthernet 0/0.2
yinzhengjie(config-subif)#encapsulation dot1Q 30
yinzhengjie(config-subif)#ip address 172.16.30.254 255.255.255.0
yinzhengjie(config-subif)#exit
yinzhengjie(config)#exit
yinzhengjie#
%SYS-5-CONFIG_I: Configured from console by console yinzhengjie#show run
Building configuration... Current configuration : 528 bytes
!
version 12.2
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname yinzhengjie
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface FastEthernet0/0
no ip address
duplex auto
speed auto
!
interface FastEthernet0/0.1
encapsulation dot1Q 20
ip address 192.168.20.254 255.255.255.0
!
interface FastEthernet0/0.2
encapsulation dot1Q 30
ip address 172.16.30.254 255.255.255.0
!
ip classless
!
!
!
!
!
!
!
line con 0
!
line aux 0
!
line vty 0 4
login
!
!
!
end yinzhengjie# ‘’‘
扩充：
1:在路由器上配置trunk的封装协议的命令：
encapsulation [isl/dot1q] vlan＃
2:上面的路由器配置了dot1q中继封装,20是vlan 20。
3:Trunk的封装类型一共有 ISL和802.1Q两种，而802.1Q在输入的时候则为dot1q ’‘’
路由器配置过程
yinzhengjie#show run
Building configuration... Current configuration : 528 bytes
!
version 12.2
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname yinzhengjie
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface FastEthernet0/0
no ip address
duplex auto
speed auto
!
interface FastEthernet0/0.1
encapsulation dot1Q 20
ip address 192.168.20.254 255.255.255.0
!
interface FastEthernet0/0.2
encapsulation dot1Q 30
ip address 172.16.30.254 255.255.255.0
!
ip classless
!
!
!
!
!
!
!
line con 0
!
line aux 0
!
line vty 0 4
login
!
!
!
end yinzhengjie#
路由器的配置信息
4.如下图所示，通过动态路由RIP实现三个路由器之间的全网互通。
pc0测试结果如下：
PC>
PC>ping 192.168.1.254 #网关地址 Pinging 192.168.1.254 with 32 bytes of data: Reply from 192.168.1.254: bytes=32 time=1ms TTL=255
Reply from 192.168.1.254: bytes=32 time=1ms TTL=255
Reply from 192.168.1.254: bytes=32 time=0ms TTL=255
Reply from 192.168.1.254: bytes=32 time=1ms TTL=255 Ping statistics for 192.168.1.254:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 1ms, Average = 0ms PC>ping 192.168.2.1 #路由器0/1地址 Pinging 192.168.2.1 with 32 bytes of data: Reply from 192.168.2.1: bytes=32 time=1ms TTL=255
Reply from 192.168.2.1: bytes=32 time=0ms TTL=255
Reply from 192.168.2.1: bytes=32 time=0ms TTL=255
Reply from 192.168.2.1: bytes=32 time=0ms TTL=255 Ping statistics for 192.168.2.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 1ms, Average = 0ms PC>ping 192.168.3.1 #中间路由地址 Pinging 192.168.3.1 with 32 bytes of data: Reply from 192.168.3.1: bytes=32 time=1ms TTL=254
Reply from 192.168.3.1: bytes=32 time=0ms TTL=254
Reply from 192.168.3.1: bytes=32 time=2ms TTL=254
Reply from 192.168.3.1: bytes=32 time=0ms TTL=254 Ping statistics for 192.168.3.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 2ms, Average = 0ms PC>ping 192.168.4.1 #pc1机器地址 Pinging 192.168.4.1 with 32 bytes of data: Reply from 192.168.4.1: bytes=32 time=11ms TTL=125
Reply from 192.168.4.1: bytes=32 time=1ms TTL=125
Reply from 192.168.4.1: bytes=32 time=0ms TTL=125
Reply from 192.168.4.1: bytes=32 time=0ms TTL=125 Ping statistics for 192.168.4.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 11ms, Average = 3ms PC>
pc测试结果
路由器配置信息
yinzhengjie(config)#interface fastEthernet 0/0
yinzhengjie(config-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
yinzhengjie(config-if)#ip address 192.168.1.254 255.255.255.0
yinzhengjie(config-if)#exit
yinzhengjie(config)#interface fastEthernet 0/1
yinzhengjie(config-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
yinzhengjie(config-if)#ip address 192.168.2.1 255.255.255.0
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
yinzhengjie(config-if)#ex
yinzhengjie(config)#router rip #进入动态路由配置模式
yinzhengjie(config-router)#version 2
yinzhengjie(config-router)#no auto-summary
yinzhengjie(config-router)#network 192.168.1.0 #与路由直连网段
yinzhengjie(config-router)#network 192.168.2.0 #与路由直连网段
yinzhengjie#show run
Building configuration... Current configuration : 538 bytes
!
version 12.2
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname yinzhengjie
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface FastEthernet0/0
ip address 192.168.1.254 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
ip address 192.168.2.1 255.255.255.0
duplex auto
speed auto
!
router rip
version 2
network 192.168.1.0
network 192.168.2.0
no auto-summary
!
ip classless
!
!
!
!
!
!
!
line con 0
!
line aux 0
!
line vty 0 4
login
!
!
!
end yinzhengjie#
Route0配置过程
Router>en
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface fastEthernet 0/0
Router(config-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router(config-if)#ip address 192.168.2.2 255.255.255.0
Router(config-if)#exit
Router(config)#interface fastEthernet 0/1
Router(config-if)#no shutdown Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
Router(config-if)#ip address 192.168.3.1 255.255.255.0
Router(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up Router(config-if)#ex
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#no auto-summary
Router(config-router)#network 192.168.2.0
Router(config-router)#network 192.168.3.0
Router(config-router)#
Route1配置过程
yinzhengjie(config)#interface fastEthernet 0/0
yinzhengjie(config-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
yinzhengjie(config-if)#ip address 192.168.3.2 255.255.255.0
yinzhengjie(config-if)#exit
yinzhengjie(config)#interface fastEthernet 0/1
yinzhengjie(config-if)#no shutdown
yinzhengjie(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
yinzhengjie(config-if)#ip address 192.168.4.254 255.255.255.0
yinzhengjie(config-if)#exit
yinzhengjie(config)#router rip
yinzhengjie(config-router)#version 2
yinzhengjie(config-router)#no auto-summary
yinzhengjie(config-router)#network 192.168.3.0
yinzhengjie(config-router)#network 192.168.4.0
yinzhengjie(config-router)#
Route2配置过程
cisco常用命令详解的更多相关文章
- hbase shell基础和常用命令详解(转)
HBase shell的基本用法 hbase提供了一个shell的终端给用户交互.使用命令hbase shell进入命令界面.通过执行 help可以看到命令的帮助信息. 以网上的一个学生成绩表的例子来 ...
- samtools常用命令详解（转）
转自:samtools常用命令详解 samtools的说明文档:http://samtools.sourceforge.net/samtools.shtml samtools是一个用于操作sam和ba ...
- H3C常用命令详解
H3C常用命令详解 作者:尹正杰 版权声明:原创作品,谢绝转载!否则将追究法律责任. 1.关闭后台日志输出 <yinzhengjie>sys [yinzhengjie]undo info- ...
- hbase shell基础和常用命令详解
HBase是Google Bigtable的开源实现,它利用Hadoop HDFS作为其文件存储系统,利用Hadoop MapReduce来处理HBase中的海量数据,利用Zookeeper作为协同服 ...
- Tmux 的常用命令详解
Tmux 的常用命令详解 常用命令: tmux #开启tmux tmux ls #显示已有tmux列表(C-b s) tmux attach-session -t 数字 #选择tmux C-b c ...
- Hexo系列(三) 常用命令详解
Hexo 框架可以帮助我们快速创建一个属于自己的博客网站,熟悉 Hexo 框架提供的命令有利于我们管理博客 1.hexo init hexo init 命令用于初始化本地文件夹为网站的根目录 $ he ...
- 【转载】windbg 常用命令详解
windbg 常用命令详解 https://blog.csdn.net/chenyujing1234/article/details/7743460 vertarget 显示当前进程的大致信息 lmv ...
- DOS常用命令详解
DOS常用命令详解 dir 列文件名 deltree 删除目录树 cls 清屏 cd 改变当前目录 copy 拷贝文件 diskcopy 复制磁盘 del 删除文件 format 格式化磁盘 edit ...
- Kubernetes,kubectl常用命令详解
kubectl概述 祭出一张图,转载至 kubernetes-handbook/kubectl命令概述 ,可以对命令族有个整体的概念. 环境准备 允许master节点部署pod,使用命令如下: kub ...
随机推荐
- <编写有效用例>读书笔记3
<编写有效用例>读书笔记3 第三部分主要内容是对忙于编写用例的人的提示第20章:对每个用例的提示1.每个用例都是一篇散文:这个提示提醒我们将注意力集中与文字而不是图画上,同时帮助了解将要遇 ...
- Leetcode——171.Excel表列序号【水题】
@author: ZZQ @software: PyCharm @file: leetcode171_Excel表列序号.py @time: 2018/11/22 15:29 要求: 给定一个Exce ...
- Socket、Session、Option和Pipe
消息队列NetMQ 原理分析4-Socket.Session.Option和Pipe 消息队列NetMQ 原理分析4-Socket.Session.Option和Pipe 前言 介绍 目的 Soc ...
- TCP的TIME_WAIT
http://www.cnblogs.com/dadonggg/p/8778318.html http://www.firefoxbug.com/index.php/archives/2795/ ht ...
- Activiti For Eclipse(Mars）插件配置
Activiti BPMN 2.0 designer : http://www.activiti.org/designer/update/
- [转帖]以Windows服务方式运行ASP.NET Core程序
以Windows服务方式运行ASP.NET Core程序 原作者blog: https://www.cnblogs.com/guogangj/p/9198031.htmlaspnet的blog 需要持 ...
- flask+mako+peewee(下)(解决了Error 2006: MySQL server has gone away)
这篇主要介绍在这次项目中使用的peewee 文档地址:http://peewee.readthedocs.org/en/latest/index.html 首先我们要初始化一个数据库连接对象.这里我使 ...
- PostgreSQL之连接数修改
当前总共正在使用的连接数 select count(1) from pg_stat_activity; 显示系统允许的最大连接数 show max_connections; 显示系统保留的用户数 sh ...
- Delphi中封装ADO之我重学习记录
delphi adodataset ctstatic 数据是缓存在服务器端还是客户端 答:客户端,开启本地缓存功能后,就能数据在本地批量修改后,再批量提交,减少了网络传送 原创,专业,图文 Del ...
- face detection，landmark, recognition with deeplearning
人脸特征点定位 Joint Face Detection and Alignment using Multi-task Cascaded Convolutional Neural Networks c ...