背景

Linux的错误码包含在/usr/include/asm-generic/errno-base.h和/usr/include/asm-generic/errno.h 这两个文件内。

可用于查询、排查驱动或应用层开发中遇到的问题。

errno-base.h

/usr/include/asm-generic/errno-base.h

#ifndef _ASM_GENERIC_ERRNO_BASE_H
#define _ASM_GENERIC_ERRNO_BASE_H #define EPERM 1 /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Argument list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#define EAGAIN 11 /* Try again */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */

errno.h

/usr/include/asm-generic/errno.h

#endif
#ifndef _ASM_GENERIC_ERRNO_H
#define _ASM_GENERIC_ERRNO_H #include <asm-generic/errno-base.h> #define EDEADLK 35 /* Resource deadlock would occur */
#define ENAMETOOLONG 36 /* File name too long */
#define ENOLCK 37 /* No record locks available */
#define ENOSYS 38 /* Function not implemented */
#define ENOTEMPTY 39 /* Directory not empty */
#define ELOOP 40 /* Too many symbolic links encountered */
#define EWOULDBLOCK EAGAIN /* Operation would block */
#define ENOMSG 42 /* No message of desired type */
#define EIDRM 43 /* Identifier removed */
#define ECHRNG 44 /* Channel number out of range */
#define EL2NSYNC 45 /* Level 2 not synchronized */
#define EL3HLT 46 /* Level 3 halted */
#define EL3RST 47 /* Level 3 reset */
#define ELNRNG 48 /* Link number out of range */
#define EUNATCH 49 /* Protocol driver not attached */
#define ENOCSI 50 /* No CSI structure available */
#define EL2HLT 51 /* Level 2 halted */
#define EBADE 52 /* Invalid exchange */
#define EBADR 53 /* Invalid request descriptor */
#define EXFULL 54 /* Exchange full */
#define ENOANO 55 /* No anode */
#define EBADRQC 56 /* Invalid request code */
#define EBADSLT 57 /* Invalid slot */ #define EDEADLOCK EDEADLK #define EBFONT 59 /* Bad font file format */
#define ENOSTR 60 /* Device not a stream */
#define ENODATA 61 /* No data available */
#define ETIME 62 /* Timer expired */
#define ENOSR 63 /* Out of streams resources */
#define ENONET 64 /* Machine is not on the network */
#define ENOPKG 65 /* Package not installed */
#define EREMOTE 66 /* Object is remote */
#define ENOLINK 67 /* Link has been severed */
#define EADV 68 /* Advertise error */
#define ESRMNT 69 /* Srmount error */
#define ECOMM 70 /* Communication error on send */
#define EPROTO 71 /* Protocol error */
#define EMULTIHOP 72 /* Multihop attempted */
#define EDOTDOT 73 /* RFS specific error */
#define EBADMSG 74 /* Not a data message */
#define EOVERFLOW 75 /* Value too large for defined data type */
#define ENOTUNIQ 76 /* Name not unique on network */
#define EBADFD 77 /* File descriptor in bad state */
#define EREMCHG 78 /* Remote address changed */
#define ELIBACC 79 /* Can not access a needed shared library */
#define ELIBBAD 80 /* Accessing a corrupted shared library */
#define ELIBSCN 81 /* .lib section in a.out corrupted */
#define ELIBMAX 82 /* Attempting to link in too many shared libraries */
#define ELIBEXEC 83 /* Cannot exec a shared library directly */
#define EILSEQ 84 /* Illegal byte sequence */
#define ERESTART 85 /* Interrupted system call should be restarted */
#define ESTRPIPE 86 /* Streams pipe error */
#define EUSERS 87 /* Too many users */
#define ENOTSOCK 88 /* Socket operation on non-socket */
#define EDESTADDRREQ 89 /* Destination address required */
#define EMSGSIZE 90 /* Message too long */
#define EPROTOTYPE 91 /* Protocol wrong type for socket */
#define ENOPROTOOPT 92 /* Protocol not available */
#define EPROTONOSUPPORT 93 /* Protocol not supported */
#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT 96 /* Protocol family not supported */
#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
#define EADDRINUSE 98 /* Address already in use */
#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
#define ENETDOWN 100 /* Network is down */
#define ENETUNREACH 101 /* Network is unreachable */
#define ENETRESET 102 /* Network dropped connection because of reset */
#define ECONNABORTED 103 /* Software caused connection abort */
#define ECONNRESET 104 /* Connection reset by peer */
#define ENOBUFS 105 /* No buffer space available */
#define EISCONN 106 /* Transport endpoint is already connected */
#define ENOTCONN 107 /* Transport endpoint is not connected */
#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS 109 /* Too many references: cannot splice */
#define ETIMEDOUT 110 /* Connection timed out */
#define ECONNREFUSED 111 /* Connection refused */
#define EHOSTDOWN 112 /* Host is down */
#define EHOSTUNREACH 113 /* No route to host */
#define EALREADY 114 /* Operation already in progress */
#define EINPROGRESS 115 /* Operation now in progress */
#define ESTALE 116 /* Stale file handle */
#define EUCLEAN 117 /* Structure needs cleaning */
#define ENOTNAM 118 /* Not a XENIX named type file */
#define ENAVAIL 119 /* No XENIX semaphores available */
#define EISNAM 120 /* Is a named type file */
#define EREMOTEIO 121 /* Remote I/O error */
#define EDQUOT 122 /* Quota exceeded */ #define ENOMEDIUM 123 /* No medium found */
#define EMEDIUMTYPE 124 /* Wrong medium type */
#define ECANCELED 125 /* Operation Canceled */
#define ENOKEY 126 /* Required key not available */
#define EKEYEXPIRED 127 /* Key has expired */
#define EKEYREVOKED 128 /* Key has been revoked */
#define EKEYREJECTED 129 /* Key was rejected by service */ /* for robust mutexes */
#define EOWNERDEAD 130 /* Owner died */
#define ENOTRECOVERABLE 131 /* State not recoverable */ #define ERFKILL 132 /* Operation not possible due to RF-kill */ #define EHWPOISON 133 /* Memory page has hardware error */ #endif

Linux 错误码的更多相关文章

  1. linux错误码

    1.通过代码输出错误码以及其代表的含义  具体可以参考errno和os模块 errno.errorcode os.strerror(n) # -*- coding:utf8 -*- import os ...

  2. Linux错误码的含义

    C Name Value Description EPERM 1 Operation not permitted ENOENT 2 No such file or directory ESRCH 3 ...

  3. Linux 错误码对照表

    errno 在 <errno.h> 中定义,错误 Exx 的宏定义在 /usr/include/asm-generic 文件夹下面的  errno-base.h 和 errno.h,分别定 ...

  4. Linux环境下错误码及意义总结

    Linux的错误码包含在/usr/include/asm-generic/errno-base.h和/usr/include/asm-generic/errno.h 这两个文件内: #ifndef _ ...

  5. 写给初学者的Linux errno 错误码机制

    不同于Java的异常处理机制, 当你使用C更多的接触到是基于错误码的异常机制, 简单来说就是当调用的函数发生异常时, 程序不会跳转到一个统一处理异常的地方, 取而代之的是返回一个整型错误码. 可能会有 ...

  6. 微信支付curl出错及错误码解决方案

    1. curl错误码6 出现场景 PHP Fatal error: Uncaught exception 'WxPayException' with message 'curl出错,错误码:6' in ...

  7. errno.h 错误码描述.

    描述:一般说的Linux源码的目录,默认是基于 /usr/include/ 的. 使用 char *strerror(int errnum); 函数打印错误代码的描述.我简单对比了一下,发现描述大体一 ...

  8. 【SMTP】常见错误码

    '* 邮件服务返回代码含义 '* 500 格式错误,命令不可识别(此错误也包括命令行过长) '* 501 参数格式错误 '* 502 命令不可实现 '* 503 错误的命令序列 '* 504 命令参数 ...

  9. Smtp错误码

    Smtp错误码列表及相关原因 错误总表 420 1. Timeout Communication Problem Encountered During Transmission. Thie Is a ...

  10. ORACLE.错误码 ORA-12154 及Oracle客户端免安装版的设置

    .错误码 ORA-12154相信作为ORACLE数据库的开发人员没有少碰到“ORA-12154: TNS: 无法解析指定的连接标识符”,今天我也又碰到了类似的情况,将我的解决方法进行小结,希望能对碰到 ...

随机推荐

  1. linux网络管理及常用网络工具详解

    linux网络管理及常用网络工具详解 目录 linux网络管理及常用网络工具详解 1. linux网络管理 1.1 centos网卡命名规则 1.2 域名解析配置文件 1.3 ifconfig命令管理 ...

  2. get pull报错 Please commit your changes or stash them before you merge

    当本地分支和远程修改了同一个文件代码,pull远程分支的代码的时候会出现文件冲突 出现这个错误 Please commit your changes or stash them before you ...

  3. vben集成keycloak

    前言 公司的项目是vben admin框架需要集成keycloak,那keycloak大家应该都不陌生了,就是统一认证的一个系统简称IDS.之前用过cas,并重构过cas的前端界面,所以对此也是比较熟 ...

  4. Java面试题:@PostConstruct、init-method和afterPropertiesSet执行顺序?

    在Spring框架中,@PostConstruct注解.init-method属性.以及afterPropertiesSet()方法通常用于初始化Bean的逻辑.它们都提供了在Bean创建和初始化完成 ...

  5. C4996 scanf': This function or variable may be unsafe. Consider using scanf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details

    编译器报错,编译器使用的是Visual Studio2019版本 修改项目属性的检测sdl. 第一步,右键项目--->属性 *第二步,在打开的属性中选择,配置属性-->C/C++---&g ...

  6. Linux/Golang/glibC系统调用

    Linux/Golang/glibC系统调用 本文主要通过分析Linux环境下Golang的系统调用,以此阐明整个流程 有时候涉略过多,反而遭到质疑~,写点文章证明自己实力也好 Golang系统调用 ...

  7. 低代码与 Echarts 融合:开启智能可视化的创新浪潮

    前言 在当今数字化时代,数据的价值愈发凸显,企业和组织需要有效地利用数据来作出战略决策和优化业务流程.可视化是一种强大的工具,可以将复杂的数据以直观的方式展现出来,帮助用户更好地理解和分析数据.近年来 ...

  8. vue-i18n 初体验

    vue-i18n 初体验 使用vue,如何国际化呢?采用 vue-i18n.(i18n,internationalization,i和n中间省略18个字符) vue-i18n 官网地址 https:/ ...

  9. dotnet c# samples core nativeaot NativeLibrary

    如何在 System.Text.Json 中使用源生成 https://learn.microsoft.com/zh-cn/dotnet/standard/serialization/system-t ...

  10. UIScrollView 在Autolayout下使用的一些问题

    一.UIScrollView 双指放大手势,双击放大实现 在设置UIScrollView的frame后.maxZoomScale 和 minZoomScale之后,UIScrollView会自然支持双 ...