Caused by: io.lettuce.core.RedisCommandExecutionException: MISCONF Redis is configured to save RDB snapshots, but it is currently not able to persist on disk. Commands that may modify the data set are disabled, because this instance is configured to report errors during writes if RDB snapshotting fails (stop-writes-on-bgsave-error option). Please check the Redis logs for details about the RDB error.
at io.lettuce.core.ExceptionFactory.createExecutionException(ExceptionFactory.java:135) ~[lettuce-core-5.2.2.RELEASE.jar:5.2.2.RELEASE]
at io.lettuce.core.ExceptionFactory.createExecutionException(ExceptionFactory.java:108) ~[lettuce-core-5.2.2.RELEASE.jar:5.2.2.RELEASE]
at io.lettuce.core.protocol.AsyncCommand.completeResult(AsyncCommand.java:120) ~[lettuce-core-5.2.2.RELEASE.jar:5.2.2.RELEASE]
at io.lettuce.core.protocol.AsyncCommand.complete(AsyncCommand.java:111) ~[lettuce-core-5.2.2.RELEASE.jar:5.2.2.RELEASE]
at io.lettuce.core.protocol.CommandHandler.complete(CommandHandler.java:654) ~[lettuce-core-5.2.2.RELEASE.jar:5.2.2.RELEASE]
at io.lettuce.core.protocol.CommandHandler.decode(CommandHandler.java:614) ~[lettuce-core-5.2.2.RELEASE.jar:5.2.2.RELEASE]
at io.lettuce.core.protocol.CommandHandler.channelRead(CommandHandler.java:565) ~[lettuce-core-5.2.2.RELEASE.jar:5.2.2.RELEASE]
at io.netty.channel.AbstractChannelHandlerContext.invokeChannelRead(AbstractChannelHandlerContext.java:379) ~[netty-transport-4.1.58.Final.jar:4.1.58.Final]
at io.netty.channel.AbstractChannelHandlerContext.invokeChannelRead(AbstractChannelHandlerContext.java:365) ~[netty-transport-4.1.58.Final.jar:4.1.58.Final]
at io.netty.channel.AbstractChannelHandlerContext.fireChannelRead(AbstractChannelHandlerContext.java:357) ~[netty-transport-4.1.58.Final.jar:4.1.58.Final]
at io.netty.channel.DefaultChannelPipeline$HeadContext.channelRead(DefaultChannelPipeline.java:1410) ~[netty-transport-4.1.58.Final.jar:4.1.58.Final]
at io.netty.channel.AbstractChannelHandlerContext.invokeChannelRead(AbstractChannelHandlerContext.java:379) ~[netty-transport-4.1.58.Final.jar:4.1.58.Final]
at io.netty.channel.AbstractChannelHandlerContext.invokeChannelRead(AbstractChannelHandlerContext.java:365) ~[netty-transport-4.1.58.Final.jar:4.1.58.Final]
at io.netty.channel.DefaultChannelPipeline.fireChannelRead(DefaultChannelPipeline.java:919) ~[netty-transport-4.1.58.Final.jar:4.1.58.Final]
at io.netty.channel.nio.AbstractNioByteChannel$NioByteUnsafe.read(AbstractNioByteChannel.java:166) ~[netty-transport-4.1.58.Final.jar:4.1.58.Final]
at io.netty.channel.nio.NioEventLoop.processSelectedKey(NioEventLoop.java:719) ~[netty-transport-4.1.58.Final.jar:4.1.58.Final]
at io.netty.channel.nio.NioEventLoop.processSelectedKeysPlain(NioEventLoop.java:620) ~[netty-transport-4.1.58.Final.jar:4.1.58.Final]
at io.netty.channel.nio.NioEventLoop.processSelectedKeys(NioEventLoop.java:583) ~[netty-transport-4.1.58.Final.jar:4.1.58.Final]
at io.netty.channel.nio.NioEventLoop.run(NioEventLoop.java:493) ~[netty-transport-4.1.58.Final.jar:4.1.58.Final]
at io.netty.util.concurrent.SingleThreadEventExecutor$4.run(SingleThreadEventExecutor.java:989) ~[netty-common-4.1.58.Final.jar:4.1.58.Final]
at io.netty.util.internal.ThreadExecutorMap$2.run(ThreadExecutorMap.java:74) ~[netty-common-4.1.58.Final.jar:4.1.58.Final]
at io.netty.util.concurrent.FastThreadLocalRunnable.run(FastThreadLocalRunnable.java:30) ~[netty-common-4.1.58.Final.jar:4.1.58.Final]
... 1 common frames omitted

将redis的配置文件中 stop-writes-on-bgsave-error的值改为no

Java整合redis报错s if RDB snapshotting fails (stop-writes-on-bgsave-error option)的更多相关文章

  1. JAVA连接redis报错 ：stop-writes-on-bgsave-error option

    (error) MISCONF Redis is configured to save RDB snapshots, but it is currently not able to persist o ...

  2. Spring整合Redis时报错：java.util.NoSuchElementException: Unable to validate object

    我在Spring整合Redis时报错,我是犯了一个很低级的错误! 我设置了Redis的访问密码,在Spring的配置文件却没有配置密码这一项,配置上密码后,终于不报错了!

  3. Redis报错：RDB snapshots, but it is currently not able to persist on disk 处理

    Response received : -MISCONF Redis is configured to save RDB snapshots, but it is currently not able ...

  4. Springboot整合Elasticsearch报错availableProcessors is already set to [4], rejecting [4]

    Springboot整合Elasticsearch报错 今天使用SpringBoot整合Elasticsearch时候,相关的配置完成后,启动项目就报错了. nested exception is j ...

  5. spring+hibernate整合：报错org.hibernate.HibernateException: No Session found for current thread

    spring+hibernate整合:报错信息如下 org.hibernate.HibernateException: No Session found for current thread at o ...

  6. redis 报错及解决

    报错: (error) MISCONF Redis is configured to save RDB snapshots, but it is currently not able to persi ...

  7. Redis报错 : (error) NOAUTH Authentication required.

    原文:Redis报错 : (error) NOAUTH Authentication required. 这个错误是因为没有用密码登陆认证 , 先输入密码试试 . 127.0.0.1:6379> ...

  8. spring整合quartz报错

    今天spring整合quartz报错,最后一步步排查,发现是和redis依赖冲突,最后redis升级了一下,问题解决. 总结:发现问题,逐一排查,如果是整合问题,报类加载不到的错误,大概率是和其他组件 ...

  9. redis报错解决

    1.Connecting to node 127.0.0.17000 [ERR] Sorry, can't connect to node 192.168.1.917000 redis集群:Conne ...

随机推荐

  1. 洛谷 P6072 -『MdOI R1』Path（回滚莫队+01-trie）

    题面传送门 又是 ix35 神仙出的题,先以 mol 为敬 %%% 首先预处理出根节点到每个点路径上权值的异或和 \(dis_i\),那么两点 \(a,b\) 路径上权值的异或和显然为 \(dis_a ...

  2. 【R】ggplot2的facet_warp/grid如何实现超过两类水平的分面？

    之前最多只做过两类单水平的分面,即两两组合的面板图.如果某类超过两个水平呢? 一类的分面:facet_wrap(~ align) 两类的分面(x轴和y轴):facet_grid(align ~ gen ...

  3. Linux升级命令yum upgrade和yum update的区别

    Linux升级命令有两个分别是yum upgrade和yum update, 这个两个命令是有区别的: yum -y update 升级所有包同时也升级软件和系统内核 yum -y upgrade 只 ...

  4. Python time&datetime模块

    1.time&datetime模块 time&datetime是时间模块,常用以处理时间相关问题 time.time() #返回当前时间的时间戳timestamp time.sleep ...

  5. 使用 JDBC 驱动程序

    本部分提供使用 Microsoft JDBC Driver for SQL Server 与 SQL Server 数据库建立简单连接的快速入门指导.在连接到 SQL Server 数据库之前,必须首 ...

  6. 内网穿透—使用 frp 实现内外网互通

    前言 什么是内网穿透? 内网穿透,又叫 NET 穿透,是计算机用语.用通俗的说法就是你家里的个人电脑,可以直接被外网的人访问.例如你在公司,不通过远程工具,直接也可以访问到家里的电脑(本文章特指 we ...

  7. 强化学习实战 | 自定义Gym环境

    新手的第一个强化学习示例一般都从Open Gym开始.在这些示例中,我们不断地向环境施加动作,并得到观测和奖励,这也是Gym Env的基本用法: state, reward, done, info = ...

  8. 关于redis HSCAN count参数不生效的问题

    这的确是个坑,HSCAN是为了处理大量数据而设计的,可能也是因为这个原因,在数据量较少的情况下count参数并不会生效,具体阈值是多少并没有实际测验过不过可以断定的是一百条数据一下估计是不会生效的.

  9. webservice--常用注解

    定义说明书的显示方法1.@WebService(serviceName="PojoService", portName="PojoPort", name=&qu ...

  10. Linux基础命令---enable开启shell命令

    enable enable指令用来关闭或者激活shell内部命令.此命令的适用范围:RedHat.RHEL.Ubuntu.CentOS.Fedora. 1.语法       enable [-a]   ...