在之前文章《multipath多路径实验01-构建iSCSI模拟环境》中，已经介绍了如何构建iSCSI模拟环境（RHEL6），但在RHEL7中已经不适用，本文记录下新的配置方法。

环境：RHEL 7.3

1.LVM创建

在RHEL7.3中，对于lvm操作部分与之前RHEL6版本没有区别,还是创建pv，vg，lv的方法，命令参考如下：

pvcreate /dev/sdb

vgcreate vg_storage /dev/sdb

lvcreate -L 1g -n lv_lun1 vg_storage

lvcreate -L 1g -n lv_lun2 vg_storage

lvcreate -L 1g -n lv_lun3 vg_storage

lvcreate -L 40g -n lv_lun4 vg_storage

lvcreate -L 10g -n lv_lun5 vg_storage

lvcreate -L 10g -n lv_lun6 vg_storage

lvcreate -L 10g -n lv_lun7 vg_storage

lvcreate -L 16g -n lv_lun8 vg_storage

最终可以看到新建的lv信息：

[root@Storage-B yum.repos.d]# lvs

  LV      VG         Attr       LSize  Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert

  home    rhel       -wi-ao---- 23.33g

  root    rhel       -wi-ao---- 47.79g

  swap    rhel       -wi-ao----  7.88g

  lv_lun1 vg_storage -wi-a-----  1.00g

  lv_lun2 vg_storage -wi-a-----  1.00g

  lv_lun3 vg_storage -wi-a-----  1.00g

  lv_lun4 vg_storage -wi-a----- 40.00g

  lv_lun5 vg_storage -wi-a----- 10.00g

  lv_lun6 vg_storage -wi-a----- 10.00g

  lv_lun7 vg_storage -wi-a----- 10.00g

  lv_lun8 vg_storage -wi-a----- 16.00g

2.服务端配置

之前在RHEL6中安装的iscsi服务端rpm包的名字是：scsi-target-utils，这在RHEL7中变成了targetd、targetcli这两个包。
**2.1 使用yum安装targetd和targetcli**

yum -y install targetd targetcli

systemctl status targetd

systemctl start targetd

systemctl enable targetd

systemctl list-unit-files|grep targetd

同时确认targetd服务启动状态和开启启动。

2.2 使用targetcli创建设备

targetcli进入命令行，cd到/backstores/block 目录下，创建设备：

create disk1 /dev/mapper/vg_storage-lv_lun1

create disk2 /dev/mapper/vg_storage-lv_lun2

create disk3 /dev/mapper/vg_storage-lv_lun3

create disk4 /dev/mapper/vg_storage-lv_lun4

create disk5 /dev/mapper/vg_storage-lv_lun5

create disk6 /dev/mapper/vg_storage-lv_lun6

create disk7 /dev/mapper/vg_storage-lv_lun7

create disk8 /dev/mapper/vg_storage-lv_lun8

创建完成，可以成功看到：

/backstores/block> ls

o- block ...................................................................................................... [Storage Objects: 8]

  o- disk1 ........................................................ [/dev/mapper/vg_storage-lv_lun1 (1.0GiB) write-thru deactivated]

  o- disk2 ........................................................ [/dev/mapper/vg_storage-lv_lun2 (1.0GiB) write-thru deactivated]

  o- disk3 ........................................................ [/dev/mapper/vg_storage-lv_lun3 (1.0GiB) write-thru deactivated]

  o- disk4 ....................................................... [/dev/mapper/vg_storage-lv_lun4 (40.0GiB) write-thru deactivated]

  o- disk5 ....................................................... [/dev/mapper/vg_storage-lv_lun5 (10.0GiB) write-thru deactivated]

  o- disk6 ....................................................... [/dev/mapper/vg_storage-lv_lun6 (10.0GiB) write-thru deactivated]

  o- disk7 ....................................................... [/dev/mapper/vg_storage-lv_lun7 (10.0GiB) write-thru deactivated]

  o- disk8 ....................................................... [/dev/mapper/vg_storage-lv_lun8 (16.0GiB) write-thru deactivated]

2.3 使用targetcli创建iqn和LUN

然后cd到/iscsi目录下，创建iqn；cd到/iscsi/iqn.20...0be/tpg1/luns下创建LUN，参考命令如下：

cd /iscsi

create

cd /iscsi/iqn.20...0be/tpg1/luns

create /backstores/block/disk1

create /backstores/block/disk2

create /backstores/block/disk3

create /backstores/block/disk4

create /backstores/block/disk5

create /backstores/block/disk6

create /backstores/block/disk7

create /backstores/block/disk8

实际执行过程如下：

/backstores/block> cd /iscsi

/iscsi> ls

o- iscsi .............................................................................................................. [Targets: 0]

/iscsi> create

Created target iqn.2003-01.org.linux-iscsi.storage-b.x8664:sn.46b1dc2750be.

Created TPG 1.

Global pref auto_add_default_portal=true

Created default portal listening on all IPs (0.0.0.0), port 3260.

/iscsi> ls

o- iscsi .............................................................................................................. [Targets: 1]

  o- iqn.2003-01.org.linux-iscsi.storage-b.x8664:sn.46b1dc2750be ......................................................... [TPGs: 1]

    o- tpg1 ................................................................................................. [no-gen-acls, no-auth]

      o- acls ............................................................................................................ [ACLs: 0]

      o- luns ............................................................................................................ [LUNs: 0]

      o- portals ...................................................................................................... [Portals: 1]

        o- 0.0.0.0:3260 ....................................................................................................... [OK]

/iscsi/iqn.20...0be/tpg1/luns> ls

o- luns .................................................................................................................. [LUNs: 8]

  o- lun0 ........................................................................... [block/disk1 (/dev/mapper/vg_storage-lv_lun1)]

  o- lun1 ........................................................................... [block/disk2 (/dev/mapper/vg_storage-lv_lun2)]

  o- lun2 ........................................................................... [block/disk3 (/dev/mapper/vg_storage-lv_lun3)]

  o- lun3 ........................................................................... [block/disk4 (/dev/mapper/vg_storage-lv_lun4)]

  o- lun4 ........................................................................... [block/disk5 (/dev/mapper/vg_storage-lv_lun5)]

  o- lun5 ........................................................................... [block/disk6 (/dev/mapper/vg_storage-lv_lun6)]

  o- lun6 ........................................................................... [block/disk7 (/dev/mapper/vg_storage-lv_lun7)]

  o- lun7 ........................................................................... [block/disk8 (/dev/mapper/vg_storage-lv_lun8)]

/iscsi/iqn.20...0be/tpg1/luns>

2.4 使用targetcli创建acls

cd到acls目录下，创建client；然后cd到portals目录下创建portals, 参考命令如下：

cd /iscsi/iqn.20...0be/tpg1/acls

create iqn.2003-01.org.linux-iscsi.storage-b.x8664:sn.46b1dc2750be:client

cd /iscsi/iqn.20...0be/tpg1/portals

delete 0.0.0.0 3260

create 10.10.1.21

create 10.10.2.21

实际执行过程如下：

/iscsi/iqn.20.../tpg1/portals> pwd

/iscsi/iqn.2003-01.org.linux-iscsi.storage-b.x8664:sn.46b1dc2750be/tpg1/portals

/iscsi/iqn.20.../tpg1/portals> ls

o- portals ............................................................................................................ [Portals: 2]

  o- 10.10.1.21:3260 .......................................................................................................... [OK]

  o- 10.10.2.21:3260 .......................................................................................................... [OK]

2.5 使用targetcli查看当前配置信息

在/下执行ls，或者ls /查看当前配置信息：

/iscsi/iqn.20.../tpg1/portals> ls /

o- / ......................................................................................................................... [...]

  o- backstores .............................................................................................................. [...]

  | o- block .................................................................................................. [Storage Objects: 8]

  | | o- disk1 ...................................................... [/dev/mapper/vg_storage-lv_lun1 (1.0GiB) write-thru activated]

  | | o- disk2 ...................................................... [/dev/mapper/vg_storage-lv_lun2 (1.0GiB) write-thru activated]

  | | o- disk3 ...................................................... [/dev/mapper/vg_storage-lv_lun3 (1.0GiB) write-thru activated]

  | | o- disk4 ..................................................... [/dev/mapper/vg_storage-lv_lun4 (40.0GiB) write-thru activated]

  | | o- disk5 ..................................................... [/dev/mapper/vg_storage-lv_lun5 (10.0GiB) write-thru activated]

  | | o- disk6 ..................................................... [/dev/mapper/vg_storage-lv_lun6 (10.0GiB) write-thru activated]

  | | o- disk7 ..................................................... [/dev/mapper/vg_storage-lv_lun7 (10.0GiB) write-thru activated]

  | | o- disk8 ..................................................... [/dev/mapper/vg_storage-lv_lun8 (16.0GiB) write-thru activated]

  | o- fileio ................................................................................................. [Storage Objects: 0]

  | o- pscsi .................................................................................................. [Storage Objects: 0]

  | o- ramdisk ................................................................................................ [Storage Objects: 0]

  o- iscsi ............................................................................................................ [Targets: 1]

  | o- iqn.2003-01.org.linux-iscsi.storage-b.x8664:sn.46b1dc2750be ....................................................... [TPGs: 1]

  |   o- tpg1 ............................................................................................... [no-gen-acls, no-auth]

  |     o- acls .......................................................................................................... [ACLs: 1]

  |     | o- iqn.2003-01.org.linux-iscsi.storage-b.x8664:sn.46b1dc2750be:client ................................... [Mapped LUNs: 8]

  |     |   o- mapped_lun0 ................................................................................. [lun0 block/disk1 (rw)]

  |     |   o- mapped_lun1 ................................................................................. [lun1 block/disk2 (rw)]

  |     |   o- mapped_lun2 ................................................................................. [lun2 block/disk3 (rw)]

  |     |   o- mapped_lun3 ................................................................................. [lun3 block/disk4 (rw)]

  |     |   o- mapped_lun4 ................................................................................. [lun4 block/disk5 (rw)]

  |     |   o- mapped_lun5 ................................................................................. [lun5 block/disk6 (rw)]

  |     |   o- mapped_lun6 ................................................................................. [lun6 block/disk7 (rw)]

  |     |   o- mapped_lun7 ................................................................................. [lun7 block/disk8 (rw)]

  |     o- luns .......................................................................................................... [LUNs: 8]

  |     | o- lun0 ................................................................... [block/disk1 (/dev/mapper/vg_storage-lv_lun1)]

  |     | o- lun1 ................................................................... [block/disk2 (/dev/mapper/vg_storage-lv_lun2)]

  |     | o- lun2 ................................................................... [block/disk3 (/dev/mapper/vg_storage-lv_lun3)]

  |     | o- lun3 ................................................................... [block/disk4 (/dev/mapper/vg_storage-lv_lun4)]

  |     | o- lun4 ................................................................... [block/disk5 (/dev/mapper/vg_storage-lv_lun5)]

  |     | o- lun5 ................................................................... [block/disk6 (/dev/mapper/vg_storage-lv_lun6)]

  |     | o- lun6 ................................................................... [block/disk7 (/dev/mapper/vg_storage-lv_lun7)]

  |     | o- lun7 ................................................................... [block/disk8 (/dev/mapper/vg_storage-lv_lun8)]

  |     o- portals .................................................................................................... [Portals: 2]

  |       o- 10.10.1.21:3260 .................................................................................................. [OK]

  |       o- 10.10.2.21:3260 .................................................................................................. [OK]

  o- loopback ......................................................................................................... [Targets: 0]

/iscsi/iqn.20.../tpg1/portals>

最后配置防火墙策略，或者直接关闭防火墙，建议后者，视具体要求而定。

--防火墙添加放行tcp 3260端口：

firewall-cmd --permanent --add-port=3260/tcp

firewall-cmd --reload

--关闭防火墙：

systemctl disable firewalld

systemctl stop firewalld

3.客户端配置

**3.1 使用yum安装iscsi-initiator-utils**

yum -y install iscsi-initiator-utils

3.2 编辑/etc/iscsi/initiatorname.iscsi

vi /etc/iscsi/initiatorname.iscsi

#InitiatorName=iqn.1994-05.com.redhat:babc7da33c48

InitiatorName=iqn.2003-01.org.linux-iscsi.storage-b.x8664:sn.46b1dc2750be:client

注释之前的示例，添加一行实际的配置。

3.3 使用iscsiadm发现可用存储设备并登陆连接

iscsiadm -m discovery -t st -p 10.10.1.21

[root@db92 yum.repos.d]# iscsiadm -m discovery -t st -p 10.10.1.21

10.10.1.21:3260,1 iqn.2003-01.org.linux-iscsi.storage-b.x8664:sn.46b1dc2750be

10.10.2.21:3260,1 iqn.2003-01.org.linux-iscsi.storage-b.x8664:sn.46b1dc2750be

登陆连接：

iscsiadm -m node -T iqn.2003-01.org.linux-iscsi.storage-b.x8664:sn.46b1dc2750be -p 10.10.1.21 --login

iscsiadm -m node -T iqn.2003-01.org.linux-iscsi.storage-b.x8664:sn.46b1dc2750be -p 10.10.2.21 --login

此时使用fdisk -l 查看已经正常显示所有设备：

[root@db90 ~]# fdisk -l

Disk /dev/sda: 85.9 GB, 85899345920 bytes, 167772160 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk label type: dos

Disk identifier: 0x0001b841

   Device Boot      Start         End      Blocks   Id  System

/dev/sda1   *        2048     2099199     1048576   83  Linux

/dev/sda2         2099200   167772159    82836480   8e  Linux LVM

Disk /dev/mapper/rhel-root: 51.3 GB, 51308920832 bytes, 100212736 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk /dev/mapper/rhel-swap: 8455 MB, 8455716864 bytes, 16515072 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk /dev/mapper/rhel-home: 25.1 GB, 25052577792 bytes, 48930816 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk /dev/sdb: 1073 MB, 1073741824 bytes, 2097152 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 33550336 bytes

Disk /dev/sdc: 1073 MB, 1073741824 bytes, 2097152 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 33550336 bytes

Disk /dev/sdd: 1073 MB, 1073741824 bytes, 2097152 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 33550336 bytes

Disk /dev/sde: 1073 MB, 1073741824 bytes, 2097152 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 33550336 bytes

Disk /dev/sdg: 1073 MB, 1073741824 bytes, 2097152 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 33550336 bytes

Disk /dev/sdf: 42.9 GB, 42949672960 bytes, 83886080 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 33550336 bytes

Disk /dev/sdh: 1073 MB, 1073741824 bytes, 2097152 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 33550336 bytes

Disk /dev/sdi: 10.7 GB, 10737418240 bytes, 20971520 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 33550336 bytes

Disk /dev/sdj: 42.9 GB, 42949672960 bytes, 83886080 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 33550336 bytes

Disk /dev/sdl: 10.7 GB, 10737418240 bytes, 20971520 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 33550336 bytes

Disk /dev/sdk: 10.7 GB, 10737418240 bytes, 20971520 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 33550336 bytes

Disk /dev/sdn: 10.7 GB, 10737418240 bytes, 20971520 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 33550336 bytes

Disk /dev/sdm: 10.7 GB, 10737418240 bytes, 20971520 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 33550336 bytes

Disk /dev/sdo: 10.7 GB, 10737418240 bytes, 20971520 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 33550336 bytes

Disk /dev/sdp: 17.2 GB, 17179869184 bytes, 33554432 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 33550336 bytes

Disk /dev/sdq: 17.2 GB, 17179869184 bytes, 33554432 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 33550336 bytes

[root@db90 ~]#

由于是两条链路，所以fdisk看到的存储LUN是两倍，后续再使用多路径软件聚合即可使用。

RHEL7 配置iSCSI模拟环境的更多相关文章

multipath多路径实验01-构建iscsi模拟环境
multipath多路径实验01-构建iscsi模拟环境前几天跟同事网上闲聊技术,吐槽之前自己没有配置过多路径的经历,虽然多路径的配置过程很简单,职责划分也应是主机或存储工程师来搞定,DBA只需要直 ...
配置gem5-gpu模拟环境
// 系统:ubuntu 14.04,显卡:支持CUDA的显卡.建议换aliyun的源!先clean软件源再update.// 在Ubuntu 16.04上试过,配好环境变量,编译出错(把14.04上 ...
Cluster基础(一)：配置iSCSI服务、编写udev规则、配置并访问NFS共享、部署Multipath多路径环境
一.配置iSCSI服务目标: 本案例要求先搭建好一台iSCSI服务器,并将整个磁盘共享给客户端: 虚拟机添加新的磁盘将新添加的磁盘分区并创建两个逻辑卷逻辑卷名称分别为:/dev/myvg/isc ...
CentOS 6.5下配置iSCSI网络存储
一.简介 iSCSI(internet SCSI)技术由IBM公司研究开发,是一个供硬件设备使用的.可以在IP协议的上层运行的SCSI指令集,这种指令集合可以实现在IP网络上运行 SCSI协议,使其能 ...
CentOS 6.3下配置iSCSI网络存储
一.简介 iSCSI(internet SCSI)技术由IBM公司研究开发,是一个供硬件设备使用的.可以在IP协议的上层运行的SCSI指令集,这种指令集合可以实现在IP网络上运行SCSI协议,使其能够 ...
配置iSCSI部署网络存储
iSCSI( Internet Small Computer System Interface 互联网小型计算机系统接口)是由IBM 下属的两大研发机构一一加利福尼亚AImaden和以色列Haifa研 ...
RHEL7配置端口转发和地址伪装
说明:这里是Linux服务综合搭建文章的一部分,本文可以作为Linux上使用firewalld做端口转发和地址伪装以及外网访问内网的参考. 注意:这里所有的标题都是根据主要的文章(Linux基础服务搭 ...
vim配置python开发环境
vim配置python开发环境一.安装vim sudo apt-get install vim 二.vim基础配置 #Centos6.5 /usr/share/vim/vim72 vi /etc/v ...
Ubuntu配置Android编译环境
1.Ubuntu安装 VMware安装ubuntu之后,安装Vmware tools: 1.安装完ubuntu后,VMware Workstation菜单:虚拟机-->安装 Vmware Too ...

随机推荐

merge函数：R语言，根据相同的列或ID合并不同的文件
一般Excel就能实现根据相同的列或ID合并不同的文件,但对于大文件来说,比如几十个G的数据量,用Excel处理,不仅耗时,而且还会使电脑崩溃.R语言的优势就体现在这里了,处理大文件相当快. firs ...
在Linux上安装Elasticsearch5.x
这里使用elasticsearch做全文检索,不是ELK日志采集. elasticsearch作为全文检索,必须服务端和客服端的版本一致,所以在安装elasticsearch时,要注意版本问题. 前言 ...
circRNA
一.circRNA序列提取环状RNA (circRNA)是一类不具有 5' 末端帽子和 3' 末端 poly(A)尾巴.并以共价键形成环形结构的非编码 RNA 分子. 环状RNA (circRNA) ...
JavaSE学习总结（九）—— Java访问数据库（JDBC）
一.JDBC简介 JDBC(Java Data Base Connectivity,java数据库连接)是一种用于执行SQL语句的Java API,可以为多种关系数据库提供统一访问,它由一组用Java ...
Linux 内核 hlist 详解
在Linux内核中,hlist(哈希链表)使用非常广泛.本文将对其数据结构和核心函数进行分析. 和hlist相关的数据结构有两个:hlist_head 和 hlist_node //hash桶的头结点 ...
Codeforces 954 G. Castle Defense
http://codeforces.com/problemset/problem/954/G 二分答案检验的时候,从前往后枚举,如果发现某个位置的防御力<二分的值,那么新加的位置肯定是越靠后越 ...
aspectj 表达式 execution切点函数
execution函数用于匹配方法执行的连接点,语法为: execution(方法修饰符(可选) 返回类型方法名(参数) 异常模式(可选)) 参数部分允许使用通配符: * 匹配任意字符,但只能匹配 ...
ELF文件解析（一）：Segment和Section
ELF 是Executable and Linking Format的缩写,即可执行和可链接的格式,是Unix/Linux系统ABI (Application Binary Interface)规范的 ...
找第二大的数SQL-Second Highest Salary
1: 找小于最大的最大的 select max(Salary) from Employee where Salary<(select MAX(Salary) from Employee); 2. ...
android 简单文件操作
1.布局 <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" xmlns:too ...

RHEL7 配置iSCSI模拟环境

1.LVM创建

2.服务端配置

3.客户端配置

RHEL7 配置iSCSI模拟环境的更多相关文章

随机推荐

热门专题