FreeRTOS Customisation -- FreeRTOSConfig.h
http://www.freertos.org/a00110.html
FreeRTOS is customised using a configuration file called FreeRTOSConfig.h. Every FreeRTOS application must have a FreeRTOSConfig.h header file in its pre-processor include path. FreeRTOSConfig.h tailors the RTOS kernel to the application being built. It is therefore specific to the application, not the RTOS, and should be located in an application directory, not in one of the RTOS kernel source code directories.
Each demo application included in the RTOS source code download has its own FreeRTOSConfig.h file. Some of the demos are quite old and do not contain all the available configuration options. Configuration options that are omitted are set to a default value within an RTOS source file.
Here is a typical FreeRTOSConfig.h definition, followed by an explanation of each parameter:
#ifndef FREERTOS_CONFIG_H
#define FREERTOS_CONFIG_H /* Here is a good place to include header files that are required across
your application. */
#include "something.h"
// Set to 1 to use the preemptive RTOS scheduler, or 0 to use the cooperative RTOS scheduler.
#define configUSE_PREEMPTION 1
#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
#define configUSE_TICKLESS_IDLE 0
#define configCPU_CLOCK_HZ 60000000
#define configTICK_RATE_HZ 250
#define configMAX_PRIORITIES 5
#define configMINIMAL_STACK_SIZE 128
#define configTOTAL_HEAP_SIZE 10240
#define configMAX_TASK_NAME_LEN 16
#define configUSE_16_BIT_TICKS 0
#define configIDLE_SHOULD_YIELD 1
#define configUSE_MUTEXES 0
#define configUSE_RECURSIVE_MUTEXES 0
#define configUSE_COUNTING_SEMAPHORES 0
#define configUSE_ALTERNATIVE_API 0 /* Deprecated! */
#define configQUEUE_REGISTRY_SIZE 10
#define configUSE_QUEUE_SETS 0
#define configUSE_TIME_SLICING 0
#define configUSE_NEWLIB_REENTRANT 0 /* Hook function related definitions. */
#define configUSE_IDLE_HOOK 0
#define configUSE_TICK_HOOK 0
#define configCHECK_FOR_STACK_OVERFLOW 0
#define configUSE_MALLOC_FAILED_HOOK 0 /* Run time and task stats gathering related definitions. */
#define configGENERATE_RUN_TIME_STATS 0
#define configUSE_TRACE_FACILITY 0
#define configUSE_STATS_FORMATTING_FUNCTIONS 0 /* Co-routine related definitions. */
#define configUSE_CO_ROUTINES 0
#define configMAX_CO_ROUTINE_PRIORITIES 1 /* Software timer related definitions. */
#define configUSE_TIMERS 1
#define configTIMER_TASK_PRIORITY 3
#define configTIMER_QUEUE_LENGTH 10
#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE /* Interrupt nesting behaviour configuration. */
#define configKERNEL_INTERRUPT_PRIORITY [dependent of processor]
#define configMAX_SYSCALL_INTERRUPT_PRIORITY [dependent on processor and application]
#define configMAX_API_CALL_INTERRUPT_PRIORITY [dependent on processor and application] /* Define to trap errors during development. */
#define configASSERT( ( x ) ) if( ( x ) == 0 ) vAssertCalled( __FILE__, __LINE__ ) /* FreeRTOS MPU specific definitions. */
#define configINCLUDE_APPLICATION_DEFINED_PRIVILEGED_FUNCTIONS 0 /* Optional functions - most linkers will remove unused functions anyway. */
#define INCLUDE_vTaskPrioritySet 1
#define INCLUDE_uxTaskPriorityGet 1
#define INCLUDE_vTaskDelete 1
#define INCLUDE_vTaskSuspend 1
#define INCLUDE_xResumeFromISR 1
#define INCLUDE_vTaskDelayUntil 1
#define INCLUDE_vTaskDelay 1
#define INCLUDE_xTaskGetSchedulerState 1
#define INCLUDE_xTaskGetCurrentTaskHandle 1
#define INCLUDE_uxTaskGetStackHighWaterMark 0
#define INCLUDE_xTaskGetIdleTaskHandle 0
#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
#define INCLUDE_pcTaskGetTaskName 0
#define INCLUDE_eTaskGetState 0 /* A header file that defines trace macro can be included here. */ #endif /* FREERTOS_CONFIG_H */
FreeRTOS Customisation -- FreeRTOSConfig.h的更多相关文章
- freeRTOSConfig.h文件对FreeRTOS进行系统配置
FreeRTOS内核是高度可定制的,使用配置文件FreeRTOSConfig.h进行定制.每个FreeRTOS应用都必须包含这个头文件,用户根据实际应用来裁剪定制FreeRTOS内核.这个配置文件是针 ...
- 【FreeRTOS学习05】深度解剖FreeRTOSConfig.h实现对系统的自定义剪裁
ROM/RAM太小,因此要对系统进行剪裁: 相关文章 [FreeRTOS实战汇总]小白博主的RTOS学习实战快速进阶之路(持续更新) 文章目录 相关文章 1 系统的剪裁 2 FreeRTOSConfi ...
- STM32 使用 FreeRTOS过程记录
资源:http://blog.csdn.net/zhzht19861011/article/category/6191478 资源:可以下载安富莱的STM32-V5开发版资料中的FreeRTOS教程, ...
- FREERTOS 手册阅读笔记
郑重声明,版权所有! 转载需说明. FREERTOS堆栈大小的单位是word,不是byte. 根据处理器架构优化系统的任务优先级不能超过32,If the architecture optimized ...
- Keil环境中建立带FreeRTOS的STM32L项目
本文是网上转载,版权所有. Keil环境中建立带FreeRTOS的STM32L项目 1.先把source文件夹复制至project目录,然后在keil中添加RTOS文件,如图: 其中heap_2.c按 ...
- FreeRTOS学习及移植笔记之二:在IAR和STM32F103VET上移植FreeRTOS
上一次,我们简单的测试了FreeRTOS的基于IAR EWARM v6.4和STM32F103VET6平台的Demo,对其有了一个基本认识.接下来我们开始自己移植FreeRTOS的过程. 1.创建一个 ...
- FreeRTOS run on eclipse
所需软件包: FreeRTOS.7.1.0.7zeclipse-cpp-helios-SR2-win32.zipTDM-GCC-32(版本任意吧..但同平台就选择一致的,32位系统就一致32位的软件, ...
- FreeRTOS 使用指南(转)
源:FreeRTOS 使用指南 繁星电子开发团队制作 作为一个轻量级的操作系统,FreeRTOS 提供的功能包括:任务管理.时间管理.信号量.消息队列.内存管理.记录功能等,可基本满足较小系统的需要. ...
- 轻量级操作系统FreeRTOS的内存管理机制(一)
本文由嵌入式企鹅圈原创团队成员朱衡德(Hunter_Zhu)供稿. 近几年来,FreeRTOS在嵌入式操作系统排行榜中一直位居前列,作为开源的嵌入式操作系统之一,它支持许多不同架构的处理器以及多种编译 ...
随机推荐
- POJ - Problem 1275 - Cashier Employment
· 对于差分约束,题目要求求什么便设什么,令$Sum[i]$表示由$0 ~ i$的雇佣人数. · 要充分利用题目所给条件,令$Have[i]$表示i时刻申报的人数,$Need[i]$表示i时刻需要的人 ...
- Jmeter命令行选项
示例:jmeter.bat -n -j %tmp%\%date:~0,4%%date:~5,2%%date:~8,2%_%time:~0,2%%time:~3,2%%time:~6,2%%time:~ ...
- Java web项目中新建maven项目出现的问题
1.首先新建maven项目,新建Maven时出现了版本问题,报错 第一个错误:jdk版本与project facets不匹配(大概是这样,忘记截图了),那么解决办法是: 在项目右击--->Pro ...
- CMS(Concurrent Mark-Sweep)垃圾回收器
http://www.iteye.com/topic/1119491 1.总体介绍: CMS(Concurrent Mark-Sweep)是以牺牲吞吐量为代价来获得最短回收停顿时间的垃圾回收器.对于要 ...
- windows 下安装 nginx + php
1. 下载软件 需要的软件有nginx,php,mysql(如不需要可不安装) nginx.org,www.php.net上面有得下 全部解压出来 php基本不用做任何修改(下载直接解压版本的) 用c ...
- 修改 jupyter notebook 启动工作路径的方法
Windows下jupyter notebook默认的启动路径就是当前cmd启动jupyter 的路径: C:\Users\用户名>jupyter notebook 此时jupyter 的启动工 ...
- python平均值和加权平均值
In [15]: import numpy as np In [16]: a=(70,80,60) In [17]: np.mean(a) #平均值 Out[17]: 70.0 In [18]: np ...
- eclipse svn 以一种访问权限不允许的方式做了一个访问套接字的尝试
以一种访问权限不允许的方式做了一个访问套接字的尝试 svn: Unable to connect http://xxx.xxx 安装插件是把Eclipse的网络访问禁止了,然后用svn就老提示[以一种 ...
- 如何使用Bootstrap4显示和隐藏元素
如何使用Bootstrap4显示和隐藏元素 为了更快地进行移动设备开发,请使用响应式显示类来按设备显示和隐藏元素.避免创建相同站点的完全不同版本,而是相应地为每个屏幕大小隐藏元素. 要隐藏元素,只需使 ...
- 什么是泛型 转载自http://www.blogjava.net/Jack2007/archive/2008/05/05/198566.html
我们在编写程序时,经常遇到两个模块的功能非常相似,只是一个是处理int数据,另一个是处理string数据,或者其他自定义的数据类型,但我们没有办法,只能分别写多个方法处理每个数据类型,因为方法的参数类 ...