发送trim值

　　发送寄存器和地址上的所有值

    uart_send(0xa1);
    uart_send(*((char code*)0x2001));
    uart_send(*((char code*)0x2002));
    uart_send(*((char code*)0x2003));
    uart_send(*((char code*)0x2004));
    uart_send(*((char code*)0x2005));
    uart_send(*((char code*)0x2006));

    uart_send(0xa2);
    uart_send(TRMVAL32K);
    uart_send(OPINTEN);
    uart_send(OPOUTFLAG);
    uart_send(LVIINT);
    uart_send(PMUINTEN);
    uart_send(ADCON1);

发送寄存器和地址上的指定bit值

    uart_send(0xa8);//nvr读取trim值

    trimValue  =(*((char code*)0x2001))&0x0f;  //32k    bit3-0
    uart_send(trimValue);
    trimValue= ((*((char code*)0x2002))>>)&0x1f; //ocp       bit7-3
    uart_send(trimValue);
    trimValue= ((*((char code*)0x2003))>>)&0x1f; //ovp       bit7-3
    uart_send(trimValue);
    trimValue= ((*((char code*)0x2004))>>)&0x1f; //lvi       bit7-3
    uart_send(trimValue);
    trimValue=    ((*((char code*)0x2005))>>)&0x1f;//banfgap      bit6-2
    uart_send(trimValue);
    trimValue=     ((*((char code*)0x2006))>>)&0x0f;//adcRef      bit7-4
    uart_send(trimValue);

    uart_send(0xa9);    //寄存器读取trim值
    trimValue  =TRMVAL32K&0x0f;  //32k    bit3-0
    uart_send(trimValue);
    trimValue= (OPINTEN&0xf8)>>; //ocp       bit7-3
    uart_send(trimValue);
    trimValue= (OPOUTFLAG&0xf8)>>; //ovp       bit7-3
    uart_send(trimValue);
    trimValue= (LVIINT&0xf8)>>; //lvi       bit7-3
    uart_send(trimValue);
    trimValue=    (PMUINTEN&0x7c)>>;//banfgap      bit6-2
    uart_send(trimValue);
    trimValue=     (ADCON1&0xf0)>>;//adcRef      bit7-4
    uart_send(trimValue);