maven国内镜像
<?xml version="1.0" encoding="UTF-8"?>
<!--
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements. See the NOTICE file
distributed with this work for additional information
regarding copyright ownership. The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an
"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied. See the License for the
specific language governing permissions and limitations
under the License.
-->
<!--
| This is the configuration file for Maven. It can be specified at two levels:
|
| 1. User Level. This settings.xml file provides configuration for a single user,
| and is normally provided in ${user.home}/.m2/settings.xml.
|
| NOTE: This location can be overridden with the CLI option:
|
| -s /path/to/user/settings.xml
|
| 2. Global Level. This settings.xml file provides configuration for all Maven
| users on a machine (assuming they're all using the same Maven
| installation). It's normally provided in
| ${maven.home}/conf/settings.xml.
|
| NOTE: This location can be overridden with the CLI option:
|
| -gs /path/to/global/settings.xml
|
| The sections in this sample file are intended to give you a running start at
| getting the most out of your Maven installation. Where appropriate, the default
| values (values used when the setting is not specified) are provided.
|
|-->
<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">
<!-- localRepository
| The path to the local repository maven will use to store artifacts.
|
| Default: ${user.home}/.m2/repository-->
<localRepository>D:\test\Repository</localRepository>
<!-- interactiveMode
| This will determine whether maven prompts you when it needs input. If set to false,
| maven will use a sensible default value, perhaps based on some other setting, for
| the parameter in question.
|
| Default: true
<interactiveMode>true</interactiveMode>
-->
<!-- offline
| Determines whether maven should attempt to connect to the network when executing a build.
| This will have an effect on artifact downloads, artifact deployment, and others.
|
| Default: false
<offline>false</offline>
-->
<!-- pluginGroups
| This is a list of additional group identifiers that will be searched when resolving plugins by their prefix, i.e.
| when invoking a command line like "mvn prefix:goal". Maven will automatically add the group identifiers
| "org.apache.maven.plugins" and "org.codehaus.mojo" if these are not already contained in the list.
|-->
<pluginGroups>
<!-- pluginGroup
| Specifies a further group identifier to use for plugin lookup.
<pluginGroup>com.your.plugins</pluginGroup>
-->
</pluginGroups>
<!-- proxies
| This is a list of proxies which can be used on this machine to connect to the network.
| Unless otherwise specified (by system property or command-line switch), the first proxy
| specification in this list marked as active will be used.
|-->
<proxies>
<!-- proxy
| Specification for one proxy, to be used in connecting to the network.
|
<proxy>
<id>optional</id>
<active>true</active>
<protocol>http</protocol>
<username>proxyuser</username>
<password>proxypass</password>
<host>proxy.host.net</host>
<port>80</port>
<nonProxyHosts>local.net|some.host.com</nonProxyHosts>
</proxy>
-->
</proxies>
<!-- servers
| This is a list of authentication profiles, keyed by the server-id used within the system.
| Authentication profiles can be used whenever maven must make a connection to a remote server.
|-->
<servers>
<!-- server
| Specifies the authentication information to use when connecting to a particular server, identified by
| a unique name within the system (referred to by the 'id' attribute below).
|
| NOTE: You should either specify username/password OR privateKey/passphrase, since these pairings are
| used together.
| -->
<!-- Another sample, using keys to authenticate.
<server>
<id>siteServer</id>
<privateKey>/path/to/private/key</privateKey>
<passphrase>optional; leave empty if not used.</passphrase>
</server>
-->
</servers>
<!-- mirrors
| This is a list of mirrors to be used in downloading artifacts from remote repositories.
|
| It works like this: a POM may declare a repository to use in resolving certain artifacts.
| However, this repository may have problems with heavy traffic at times, so people have mirrored
| it to several places.
|
| That repository definition will have a unique id, so we can create a mirror reference for that
| repository, to be used as an alternate download site. The mirror site will be the preferred
| server for that repository.
|-->
<mirrors>
<!-- mirror
| Specifies a repository mirror site to use instead of a given repository. The repository that
| this mirror serves has an ID that matches the mirrorOf element of this mirror. IDs are used
| for inheritance and direct lookup purposes, and must be unique across the set of mirrors.http://repo.maven.apache.org/maven2
|-->
<mirror>
<id>nexus-aliyun</id>
<mirrorOf>*</mirrorOf>
<name>Nexus aliyun</name>
<url>http://maven.aliyun.com/nexus/content/groups/public</url>
</mirror>
<mirror>
<id>central</id>
<mirrorOf>central</mirrorOf>
<url>http://central.maven.org/maven2</url>
</mirror>
</mirrors>
<!-- profiles
| This is a list of profiles which can be activated in a variety of ways, and which can modify
| the build process. Profiles provided in the settings.xml are intended to provide local machine-
| specific paths and repository locations which allow the build to work in the local environment.
|
| For example, if you have an integration testing plugin - like cactus - that needs to know where
| your Tomcat instance is installed, you can provide a variable here such that the variable is
| dereferenced during the build process to configure the cactus plugin.
|
| As noted above, profiles can be activated in a variety of ways. One way - the activeProfiles
| section of this document (settings.xml) - will be discussed later. Another way essentially
| relies on the detection of a system property, either matching a particular value for the property,
| or merely testing its existence. Profiles can also be activated by JDK version prefix, where a
| value of '1.4' might activate a profile when the build is executed on a JDK version of '1.4.2_07'.
| Finally, the list of active profiles can be specified directly from the command line.
|
| NOTE: For profiles defined in the settings.xml, you are restricted to specifying only artifact
| repositories, plugin repositories, and free-form properties to be used as configuration
| variables for plugins in the POM.
|
|-->
<profiles>
<!-- profile
| Specifies a set of introductions to the build process, to be activated using one or more of the
| mechanisms described above. For inheritance purposes, and to activate profiles via <activatedProfiles/>
| or the command line, profiles have to have an ID that is unique.
|
| An encouraged best practice for profile identification is to use a consistent naming convention
| for profiles, such as 'env-dev', 'env-test', 'env-production', 'user-jdcasey', 'user-brett', etc.
| This will make it more intuitive to understand what the set of introduced profiles is attempting
| to accomplish, particularly when you only have a list of profile id's for debug.
|
| This profile example uses the JDK version to trigger activation, and provides a JDK-specific repo. -->
<profile>
<id>jdk-1.8</id>
<activation>
<jdk>1.8</jdk>
</activation>
<properties>
<maven.compiler.source>1.8</maven.compiler.source>
<maven.compiler.target>1.8</maven.compiler.target>
<maven.compiler.compilerVersion>1.8</maven.compiler.compilerVersion>
</properties>
</profile>
<profile>
<id>nexus</id>
<repositories>
<repository>
<id>nexus-releases</id>
<url>http://maven.aliyun.com/nexus/content/repositories/releases</url>
<releases>
<enabled>true</enabled>
</releases>
<snapshots>
<enabled>true</enabled>
</snapshots>
</repository>
<repository>
<id>nexus-snapshots</id>
<url>http://maven.aliyun.com/nexus/content/repositories/snapshots</url>
<releases>
<enabled>true</enabled>
</releases>
<snapshots>
<enabled>true</enabled>
</snapshots>
</repository>
</repositories>
<pluginRepositories>
<pluginRepository>
<id>nexus-releases</id>
<url>http://maven.aliyun.com/nexus/content/repositories/releases</url>
<releases>
<enabled>true</enabled>
</releases>
<snapshots>
<enabled>true</enabled>
</snapshots>
</pluginRepository>
<pluginRepository>
<id>nexus-snapshots</id>
<url>http://maven.aliyun.com/nexus/content/repositories/snapshots</url>
<releases>
<enabled>true</enabled>
</releases>
<snapshots>
<enabled>true</enabled>
</snapshots>
</pluginRepository>
</pluginRepositories>
</profile>
</profiles>
<activeProfiles>
<activeProfile>nexus</activeProfile>
</activeProfiles>
</settings>
maven国内镜像的更多相关文章
- 170220、maven国内镜像 阿里云
maven确实是一个好东西,但是在国内下载官方仓库的jar却是个大问题,速度不敢恭维,现在oschina的国内maven镜像服务已关闭,无奈之下只能另寻门路. 今天突然发现了阿里云maven国内镜像, ...
- maven国内镜像(maven下载慢的解决方法)
Maven是当前流行的项目管理工具,但官方的库在国外经常连不上,连上也下载速度很慢.国内oschina的maven服务器很早之前就关了.今天发现阿里云的一个中央仓库,亲测可用. <mirror& ...
- Maven国内镜像-阿里云
国外的maven下载速度堪忧,大部分国内网络访问都很慢国内的阿里云同样提供了maven的文件镜像使用:1.在maven的setting.xml加入下段代码即可使用阿里云的maven镜像 <mir ...
- maven 国内镜像地址
由于连接国外网站时网速特慢,为解决这个问题,os china 建立了一个maven 的私服.为了记忆,特将此记录. settings.xml 设置镜像方法步骤如下: 1. mirrors 设置 < ...
- maven国内镜像(国内oschina的maven服务器关了)
Maven是官方的库在国外,连下载速度很慢.国内oschina的maven服务器很早之前就关了.今天发现阿里云的一个中央仓库,亲测可用. 找到E:\maven\apache-maven-3.5.2\c ...
- maven国内镜像、国内外仓库(直接下载jar)
阿里: https://maven.aliyun.com/mvn/search 官方: http://repo.maven.apache.org/maven2/ maven仓库 阿里巴巴的镜像仓库, ...
- maven国内镜像配置
Maven是当前流行的项目管理工具,但官方的库在国外经常连不上,连上也下载速度很慢.国内oschina的maven服务器很早之前就关了.今天发现阿里云的一个中央仓库,亲测可用. 1 <mirro ...
- Maven国内镜像 Maven阿里云镜像
<mirror> <id>nexus-aliyun</id> <mirrorOf>central</mirrorOf> <name&g ...
- maven 国内镜像
<mirrors> <!-- mirror | Specifies a repository mirror site to use instead of a given reposi ...
随机推荐
- iOS开发:自定义带下划线文本的UIButton
Uiunderlinedbutton.h代码 @interface UIUnderlinedButton : UIButton { } + (UIUnderlinedButton *) underli ...
- Java中ArrayList的对象引用问题
前言事件起因是由于同事使用ArrayList的带参构造方法进行ArrayList对象复制,修改新的ArrayList对象中的元素(对象)的成员变量时也会修改原ArrayList中的元素(对象)的成员变 ...
- shell脚本,awk实现跳过文件里面的空行。
1.用awk '{if(!NF ){next}}1' file11 实现对文件里面的空行进行跳过操作,并输出结果. 2. awk '{if(!NF || /^#/){next}}1' file11 实 ...
- 前端-带header和footer的双栏布局
目标是实现如上图带header和footer的双栏布局,其中右侧sidebar是固定宽度,左侧content是自适应: https://www.zybuluo.com/dengzhirong/note ...
- JS学习笔记-构造函数篇
创建实例 funtion Fn (){ var num = 10; this.x = 100; this.getX = function(){ cons ...
- 在kali上安装谷歌浏览器
在kali上安装谷歌浏览器的时候,遇到了很多问题,经过不懈努力,终于解决,现在把方法总结一下,希望对遇到同样问题的人能有一定帮助.这是给最白的小白参考的,大牛勿喷哈. 首先去这个网站www.googl ...
- 整合mybatis和spring时 Error creating bean with name 'sqlSessionFactory' defined in class path resource
今天在整合mybatis和spring的时候出的错 报错如下 Exception in thread "main" org.springframework.beans.factor ...
- ECMAScript 6入门扩展笔记
字符串扩展 Unicode相关补充 引入"\u{xx}"来表示码点,之前只能表示\u0000-\uffff引入String.fromCodePoint()能正确读取大于uFFFF的 ...
- python编写登录接口
要求: 输入用户名密码 认证成功显示欢迎信息 输错三次以后锁定 代码如下: # Author:YKwhile(True): select=input('请问是注册还是登录') if selec ...
- django_mysql_配置
配置 1. 安装Pymysql pip install PyMySQL 然后在项目同名_init__添加 from pymysql import install_as_MySQLdb install_ ...