程序开头要声明
#include <string.h> 函数名: stpcpy
功 能: 拷贝一个字符串到另一个
用 法: char *stpcpy(char *destin, char *source);
程序例: #include <stdio.h>
#include <string.h> int main(void)
{
char string[10];
char *str1 = "abcdefghi"; stpcpy(string, str1);
printf("%s\n", string);
return 0;
} 函数名: strcat
功 能: 字符串拼接函数
用 法: char *strcat(char *destin, char *source);
程序例: #include <string.h>
#include <stdio.h> int main(void)
{
char destination[25];
char *blank = " ", *c = "C++", *Borland = "Borland"; strcpy(destination, Borland);
strcat(destination, blank);
strcat(destination, c); printf("%s\n", destination);
return 0;
} 函数名: strchr
功 能: 在一个串中查找给定字符的第一个匹配之处\
用 法: char *strchr(char *str, char c);
程序例: #include <string.h>
#include <stdio.h> int main(void)
{
char string[15];
char *ptr, c = 'r'; strcpy(string, "This is a string");
ptr = strchr(string, c);
if (ptr)
printf("The character %c is at position: %d\n", c, ptr-string);
else
printf("The character was not found\n");
return 0;
} 函数名: strcmp
功 能: 串比较
用 法: int strcmp(char *str1, char *str2);
看Asic码,str1>str2,返回值 > 0;两串相等,返回0
程序例: #include <string.h>
#include <stdio.h> int main(void)
{
char *buf1 = "aaa", *buf2 = "bbb", *buf3 = "ccc";
int ptr; ptr = strcmp(buf2, buf1);
if (ptr > 0)
printf("buffer 2 is greater than buffer 1\n");
else
printf("buffer 2 is less than buffer 1\n"); ptr = strcmp(buf2, buf3);
if (ptr > 0)
printf("buffer 2 is greater than buffer 3\n");
else
printf("buffer 2 is less than buffer 3\n"); return 0;
} 函数名: strncmpi
功 能: 将一个串中的一部分与另一个串比较, 不管大小写
用 法: int strncmpi(char *str1, char *str2, unsigned maxlen);
程序例: #include <string.h>
#include <stdio.h> int main(void)
{
char *buf1 = "BBB", *buf2 = "bbb";
int ptr; ptr = strcmpi(buf2, buf1); if (ptr > 0)
printf("buffer 2 is greater than buffer 1\n"); if (ptr < 0)
printf("buffer 2 is less than buffer 1\n"); if (ptr == 0)
printf("buffer 2 equals buffer 1\n"); return 0;
} 函数名: strcpy
功 能: 串拷贝
用 法: char *strcpy(char *str1, char *str2);
程序例: #include <stdio.h>
#include <string.h> int main(void)
{
char string[10];
char *str1 = "abcdefghi"; strcpy(string, str1);
printf("%s\n", string);
return 0;
} 函数名: strcspn
功 能: 在串中查找第一个给定字符集内容的段
用 法: int strcspn(char *str1, char *str2);
程序例: #include <stdio.h>
#include <string.h>
#include <alloc.h> int main(void)
{
char *string1 = "1234567890";
char *string2 = "747DC8";
int length; length = strcspn(string1, string2);
printf("Character where strings intersect is at position %d\n", length); return 0;
} 函数名: strdup
功 能: 将串拷贝到新建的位置处
用 法: char *strdup(char *str);
程序例: #include <stdio.h>
#include <string.h>
#include <alloc.h> int main(void)
{
char *dup_str, *string = "abcde"; dup_str = strdup(string);
printf("%s\n", dup_str);
free(dup_str); return 0;
} 函数名: stricmp
功 能: 以大小写不敏感方式比较两个串
用 法: int stricmp(char *str1, char *str2);
程序例: #include <string.h>
#include <stdio.h> int main(void)
{
char *buf1 = "BBB", *buf2 = "bbb";
int ptr; ptr = stricmp(buf2, buf1); if (ptr > 0)
printf("buffer 2 is greater than buffer 1\n"); if (ptr < 0)
printf("buffer 2 is less than buffer 1\n"); if (ptr == 0)
printf("buffer 2 equals buffer 1\n"); return 0;
} 函数名: strerror
功 能: 返回指向错误信息字符串的指针
用 法: char *strerror(int errnum);
程序例: #include <stdio.h>
#include <errno.h> int main(void)
{
char *buffer;
buffer = strerror(errno);
printf("Error: %s\n", buffer);
return 0;
} 函数名: strcmpi
功 能: 将一个串与另一个比较, 不管大小写
用 法: int strcmpi(char *str1, char *str2);
程序例: #include <string.h>
#include <stdio.h> int main(void)
{
char *buf1 = "BBB", *buf2 = "bbb";
int ptr; ptr = strcmpi(buf2, buf1); if (ptr > 0)
printf("buffer 2 is greater than buffer 1\n"); if (ptr < 0)
printf("buffer 2 is less than buffer 1\n"); if (ptr == 0)
printf("buffer 2 equals buffer 1\n"); return 0;
} 函数名: strncmp
功 能: 串比较
用 法: int strncmp(char *str1, char *str2, int maxlen);
程序例: #include <string.h>
#include <stdio.h> int main(void) {
char *buf1 = "aaabbb", *buf2 = "bbbccc", *buf3 = "ccc";
int ptr; ptr = strncmp(buf2,buf1,3);
if (ptr > 0)
printf("buffer 2 is greater than buffer 1\n");
else
printf("buffer 2 is less than buffer 1\n"); ptr = strncmp(buf2,buf3,3);
if (ptr > 0)
printf("buffer 2 is greater than buffer 3\n");
else
printf("buffer 2 is less than buffer 3\n"); return(0);
} 函数名: strncmpi
功 能: 把串中的一部分与另一串中的一部分比较, 不管大小写
用 法: int strncmpi(char *str1, char *str2);
程序例: #include <string.h>
#include <stdio.h> int main(void)
{
char *buf1 = "BBBccc", *buf2 = "bbbccc";
int ptr; ptr = strncmpi(buf2,buf1,3); if (ptr > 0)
printf("buffer 2 is greater than buffer 1\n"); if (ptr < 0)
printf("buffer 2 is less than buffer 1\n"); if (ptr == 0)
printf("buffer 2 equals buffer 1\n"); return 0;
} 函数名: strncpy
功 能: 串拷贝
用 法: char *strncpy(char *destin, char *source, int maxlen);
程序例: #include <stdio.h>
#include <string.h> int main(void)
{
char string[10];
char *str1 = "abcdefghi"; strncpy(string, str1, 3);
string[3] = '\0';
printf("%s\n", string);
return 0;
} 函数名: strnicmp
功 能: 不注重大小写地比较两个串
用 法: int strnicmp(char *str1, char *str2, unsigned maxlen);
程序例: #include <string.h>
#include <stdio.h> int main(void)
{
char *buf1 = "BBBccc", *buf2 = "bbbccc";
int ptr; ptr = strnicmp(buf2, buf1, 3); if (ptr > 0)
printf("buffer 2 is greater than buffer 1\n"); if (ptr < 0)
printf("buffer 2 is less than buffer 1\n"); if (ptr == 0)
printf("buffer 2 equals buffer 1\n"); return 0;
} 函数名: strnset
功 能: 将一个串中的所有字符都设为指定字符
用 法: char *strnset(char *str, char ch, unsigned n);
程序例: #include <stdio.h>
#include <string.h> int main(void)
{
char *string = "abcdefghijklmnopqrstuvwxyz";
char letter = 'x'; printf("string before strnset: %s\n", string);
strnset(string, letter, 13);
printf("string after strnset: %s\n", string); return 0;
} 函数名: strpbrk
功 能: 在串中查找给定字符集中的字符
用 法: char *strpbrk(char *str1, char *str2);
程序例: #include <stdio.h>
#include <string.h> int main(void)
{
char *string1 = "abcdefghijklmnopqrstuvwxyz";
char *string2 = "onm";
char *ptr; ptr = strpbrk(string1, string2); if (ptr)
printf("strpbrk found first character: %c\n", *ptr);
else
printf("strpbrk didn't find character in set\n"); return 0;
} 函数名: strrchr
功 能: 在串中查找指定字符的最后一个出现
用 法: char *strrchr(char *str, char c);
程序例: #include <string.h>
#include <stdio.h> int main(void)
{
char string[15];
char *ptr, c = 'r'; strcpy(string, "This is a string");
ptr = strrchr(string, c);
if (ptr)
printf("The character %c is at position: %d\n", c, ptr-string);
else
printf("The character was not found\n");
return 0;
} 函数名: strrev
功 能: 串倒转
用 法: char *strrev(char *str);
程序例: #include <string.h>
#include <stdio.h> int main(void)
{
char *forward = "string"; printf("Before strrev(): %s\n", forward);
strrev(forward);
printf("After strrev(): %s\n", forward);
return 0;
} 函数名: strset
功 能: 将一个串中的所有字符都设为指定字符
用 法: char *strset(char *str, char c);
程序例: #include <stdio.h>
#include <string.h> int main(void)
{
char string[10] = "123456789";
char symbol = 'c'; printf("Before strset(): %s\n", string);
strset(string, symbol);
printf("After strset(): %s\n", string);
return 0;
} 函数名: strspn
功 能: 在串中查找指定字符集的子集的第一次出现
用 法: int strspn(char *str1, char *str2);
程序例: #include <stdio.h>
#include <string.h>
#include <alloc.h> int main(void)
{
char *string1 = "1234567890";
char *string2 = "123DC8";
int length; length = strspn(string1, string2);
printf("Character where strings differ is at position %d\n", length);
return 0;
} 函数名: strstr
功 能: 在串中查找指定字符串的第一次出现
用 法: char *strstr(char *str1, char *str2);
程序例: #include <stdio.h>
#include <string.h> int main(void)
{
char *str1 = "Borland International", *str2 = "nation", *ptr; ptr = strstr(str1, str2);
printf("The substring is: %s\n", ptr);
return 0;
} 函数名: strtod
功 能: 将字符串转换为double型值
用 法: double strtod(char *str, char **endptr);
程序例: #include <stdio.h>
#include <stdlib.h> int main(void)
{
char input[80], *endptr;
double value; printf("Enter a floating point number:");
gets(input);
value = strtod(input, &endptr);
printf("The string is %s the number is %lf\n", input, value);
return 0;
} 函数名: strtok
功 能: 查找由在第二个串中指定的分界符分隔开的单词
用 法: char *strtok(char *str1, char *str2);
程序例: #include <string.h>
#include <stdio.h> int main(void)
{
char input[16] = "abc,d";
char *p; /* strtok places a NULL terminator
in front of the token, if found */
p = strtok(input, ",");
if (p) printf("%s\n", p); /* A second call to strtok using a NULL
as the first parameter returns a pointer
to the character following the token */
p = strtok(NULL, ",");
if (p) printf("%s\n", p);
return 0;
} 函数名: strtol
功 能: 将串转换为长整数
用 法: long strtol(char *str, char **endptr, int base);
程序例: #include <stdlib.h>
#include <stdio.h> int main(void)
{
char *string = "87654321", *endptr;
long lnumber; /* strtol converts string to long integer */
lnumber = strtol(string, &endptr, 10);
printf("string = %s long = %ld\n", string, lnumber); return 0;
} 函数名: strupr
功 能: 将串中的小写字母转换为大写字母
用 法: char *strupr(char *str);
程序例: #include <stdio.h>
#include <string.h> int main(void)
{
char *string = "abcdefghijklmnopqrstuvwxyz", *ptr; /* converts string to upper case characters */
ptr = strupr(string);
printf("%s\n", ptr);
return 0;
} 函数名: swab
功 能: 交换字节
用 法: void swab (char *from, char *to, int nbytes);
程序例: #include <stdlib.h>
#include <stdio.h>
#include <string.h> char source[15] = "rFna koBlrna d";
char target[15]; int main(void)
{
swab(source, target, strlen(source));
printf("This is target: %s\n", target);
return 0;
}

C语言中常用的字符串操作函数的更多相关文章

  1. LoadRunner中常用的字符串操作函数

    LoadRunner中常用的字符串操作函数有:                strcpy(destination_string, source_string);               strc ...

  2. PHP开发中常用的字符串操作函数

    1,拼接字符串 拼接字符串是最常用到的字符串操作之一,在PHP中支持三种方式对字符串进行拼接操作,分别是圆点.分隔符{}操作,还有圆点等号.=来进行操作,圆点等号可以把一个比较长的字符串分解为几行进行 ...

  3. C语言中常用的字符串处理函数总结

    C语言中字符串处理函数备注 此文仅用于自己研究和记录 字符串处理函数 1. char *gets(char *s); #include<stdio.h> 功能: 从标准输入读入字符,并保存 ...

  4. JavaScript中常见的字符串操作函数及用法

    JavaScript中常见的字符串操作函数及用法 最近几次参加前端实习生招聘的笔试,发现很多笔试题都会考到字符串的处理,比方说去哪儿网笔试题.淘宝的笔试题等.如果你经常参加笔试或者也是一个过来人,相信 ...

  5. php中常用的字符串查找函数strstr()、strpos()实例解释

    string strstr ( string $haystack , mixed $needle [, bool $before_needle = false ] ) 1.$haystack被查找的字 ...

  6. PHP中常用的字符串格式化函数总结

    注意:在PHP中提供的字符串函数处理的字符串,大部分都不是在原字符串上修改,而是返回一个格式化后的新字符串. 一.取出空格和字符串填补函数 空格也是一个有效的字符,在字符串中也会占据一个位置.用户在表 ...

  7. 【linux C】C语言中常用的几个函数的总结【二】

    3.fgets 虽然用 gets() 时有空格也可以直接输入,但是 gets() 有一个非常大的缺陷,即它不检查预留存储区是否能够容纳实际输入的数据,换句话说,如果输入的字符数目大于数组的长度,get ...

  8. 【linux C】C语言中常用的几个函数的总结【一】

    1.memset函数 定义变量时一定要进行初始化,尤其是数组和结构体这种占用内存大的数据结构.在使用数组的时候经常因为没有初始化而产生“烫烫烫烫烫烫”这样的野值,俗称“乱码”.每种类型的变量都有各自的 ...

  9. matlab常用的字符串操作函数之一

    1,strcat和strvcat strcat:依次横向连接字符串: strvcat:依次纵向连接字符串: 实例1: >>a1='sophia '; >>a2='is a '; ...

随机推荐

  1. centos7.2环境中kettle环境搭建及任务推送配置详解

    目标:将mysql5.5中testdb1的ehr_user表推送到tdoa的ehr_user表中,为避免不必要的麻烦,两张表结构.编码,包括数据库编码保持一致 操作系统:centos7.2 kettl ...

  2. cactiez v11添加对mysql数据库、apache系统进行监控

    cactiez默认已经安装了mysql监控的模板,需要我们对服务器端和被监控的mysql客户端进行配置才能生效. 被监控的Mysql客户端: 如cactiez的IP为192.168.0.8 #添加一个 ...

  3. Android:视频(VideoView/MediaPlayer)

    Android之视频播放 VideoView if(android.os.Environment.getExternalStorageState().equals(android.os.Environ ...

  4. LeetCode(37): 每k个一组翻转链表

    Hard! 题目描述: 编写一个程序,通过已填充的空格来解决数独问题. 一个数独的解法需遵循如下规则: 数字 1-9 在每一行只能出现一次. 数字 1-9 在每一列只能出现一次. 数字 1-9 在每一 ...

  5. Elasticsearch创建索引和映射结构详解

    前言 这篇文章详细介绍了如何创建索引和某个类型的映射. 下文中[address]指代elasticsearch服务器访问地址(http://localhost:9200). 1       创建索引 ...

  6. 转换类型 totypeString

    type.totypeString(variable)  其中front type is want to turn    after type是你要转换成的类型 //: dsfsf/Literals. ...

  7. STL整理之map

    转载请注明出处,部分内容引自李煜东<算法竞赛进阶指南> 前置知识:    C++.C语言入门 Map是什么 Map是从键(key)到值(value)的映射,其内部实现是一棵以key为关键码 ...

  8. checkbox简单例子

    写个简单的例子,如下:html页面部分:<input type="checkbox" value="1" name="check"/& ...

  9. istringstream、ostringstream、stringstream 类介绍 和 stringstream类 clear函数的真正用途

    istringstream.ostringstream.stringstream 类介绍 和 stringstream类 clear函数的真正用途 来源: http://blog.csdn.net/T ...

  10. C#中decimal ,double,float的区别

    浮点型 Name CTS Type Description Significant Figures Range (approximate) float System.Single 32-bit sin ...