题目

Source

http://hihocoder.com/problemset/problem/1388

Description

Profess X is an expert in signal processing. He has a device which can send a particular 1 second signal repeatedly. The signal is A0 ... An-1 under n Hz sampling.

One day, the device fell on the ground accidentally. Profess X wanted to check whether the device can still work properly. So he ran another n Hz sampling to the fallen device and got B0 ... Bn-1.

To compare two periodic signals, Profess X define the DIFFERENCE of signal A and B as follow:

You may assume that two signals are the same if their DIFFERENCE is small enough.
Profess X is too busy to calculate this value. So the calculation is on you.

Input

The first line contains a single integer T, indicating the number of test cases.

In each test case, the first line contains an integer n. The second line contains n integers, A0 ... An-1. The third line contains n integers, B0 ... Bn-1.

T≤40 including several small test cases and no more than 4 large test cases.

For small test cases, 0<n≤6*103.

For large test cases, 0<n≤6*104.

For all test cases, 0≤Ai,Bi<220.

Output

For each test case, print the answer in a single line.

Sample Input

2
9
3 0 1 4 1 5 9 2 6
5 3 5 8 9 7 9 3 2
5
1 2 3 4 5
2 3 4 5 1

Sample Output

80
0

分析

题目大概说k多少时上面的式子值最小。

展开那个式子可以得到,$\sum A_i^2 + \sum B_i^2 - 2\sum A_iB_{i+k}$。前面是固定的,问题相当于最小化后面那一部分。

容易发现这是个可以用FFT快速求出的卷积形式。。

把A加长一倍,B反转,构造多项式,这样多项式乘积指数[n,2n)的系数就是各个位置的结果了。

直接FFT是不行的,千百亿的浮点数运算精度不够,比赛时搞了30多发没搞出来。。

我用了个NTT的板子A了,http://blog.csdn.net/u013654696/article/details/48653057,里面除了附赠了几个模数外还有一个O(1)快速乘不明觉厉。

代码

#include<cstdio>
#include<cstring>
#include<algorithm>
using namespace std;
#define MAXN 262144 const long long P=50000000001507329LL; // 190734863287 * 2 ^ 18 + 1
//const int P=1004535809; // 479 * 2 ^ 21 + 1
//const int P=998244353; // 119 * 2 ^ 23 + 1
const int G=3; long long mul(long long x,long long y){
return (x*y-(long long)(x/(long double)P*y+1e-3)*P+P)%P;
}
long long qpow(long long x,long long k,long long p){
long long ret=1;
while(k){
if(k&1) ret=mul(ret,x);
k>>=1;
x=mul(x,x);
}
return ret;
} long long wn[25];
void getwn(){
for(int i=1; i<=18; ++i){
int t=1<<i;
wn[i]=qpow(G,(P-1)/t,P);
}
} int len;
void NTT(long long y[],int op){
for(int i=1,j=len>>1,k; i<len-1; ++i){
if(i<j) swap(y[i],y[j]);
k=len>>1;
while(j>=k){
j-=k;
k>>=1;
}
if(j<k) j+=k;
}
int id=0;
for(int h=2; h<=len; h<<=1) {
++id;
for(int i=0; i<len; i+=h){
long long w=1;
for(int j=i; j<i+(h>>1); ++j){
long long u=y[j],t=mul(y[j+h/2],w);
y[j]=u+t;
if(y[j]>=P) y[j]-=P;
y[j+h/2]=u-t+P;
if(y[j+h/2]>=P) y[j+h/2]-=P;
w=mul(w,wn[id]);
}
}
}
if(op==-1){
for(int i=1; i<len/2; ++i) swap(y[i],y[len-i]);
long long inv=qpow(len,P-2,P);
for(int i=0; i<len; ++i) y[i]=mul(y[i],inv);
}
}
void Convolution(long long A[],long long B[],int n){
for(len=1; len<(n<<1); len<<=1);
for(int i=n; i<len; ++i){
A[i]=B[i]=0;
} NTT(A,1); NTT(B,1);
for(int i=0; i<len; ++i){
A[i]=mul(A[i],B[i]);
}
NTT(A,-1);
} long long A[MAXN],B[MAXN];
int main(){
getwn();
int t,n;
scanf("%d",&t);
while(t--){
scanf("%d",&n);
long long ans=0;
for(int i=0; i<n; ++i){
scanf("%lld",&A[i]);
ans+=A[i]*A[i];
}
for(int i=0; i<n; ++i){
scanf("%lld",&B[n-i-1]);
ans+=B[n-i-1]*B[n-i-1];
}
for(int i=0; i<n; ++i){
A[i+n]=A[i];
B[i+n]=0;
}
Convolution(A,B,2*n);
long long mx=0;
for(int i=n; i<2*n; ++i){
mx=max(mx,A[i]);
}
printf("%lld\n",ans-2*mx);
}
return 0;
}

hihoCoder1388 Periodic Signal(2016北京网赛F:NTT)的更多相关文章

  1. hihocoder-1389&&2016北京网赛07 Sewage Treatment(二分+网络流)

    题目链接: Sewage Treatment 时间限制:2000ms 单点时限:2000ms 内存限制:256MB 描述 After years of suffering, people could ...

  2. hihoCoder #1388 : Periodic Signal ( 2016 acm 北京网络赛 F题)

    时间限制:5000ms 单点时限:5000ms 内存限制:256MB 描述 Profess X is an expert in signal processing. He has a device w ...

  3. Hiho 1232 北京网络赛 F Couple Trees

    给两颗标号从1...n的树,保证标号小的点一定在上面.每次询问A树上的x点,和B树上的y点同时向上走,最近的相遇点和x,y到这个点的距离. 比赛的时候想用倍增LCA做,但写渣了....后来看到题解是主 ...

  4. 2015北京网络赛 F Couple Trees 暴力倍增

    Couple Trees Time Limit: 1 Sec Memory Limit: 256 MB 题目连接 http://hihocoder.com/problemset/problem/123 ...

  5. (中等) Hiho 1232 Couple Trees(15年北京网络赛F题),主席树+树链剖分。

    "Couple Trees" are two trees, a husband tree and a wife tree. They are named because they ...

  6. hihoCoder 1391 Countries【预处理+排序+优先队列】2016北京网络赛

    题目:http://hihocoder.com/problemset/problem/1391 题目大意: A和B两个国家互射导弹,每个国家都有一个防御系统,在防御系统开启的时间内可以将到达本国的导弹 ...

  7. 2016北京网络赛 hihocoder 1391 Countries 树状数组

    Countries   描述 There are two antagonistic countries, country A and country B. They are in a war, and ...

  8. 北京网赛I题 hiho1391 (树状数组、区间覆盖最大值问题)

    题目链接:http://hihocoder.com/problemset/problem/1391 题意:A国和B国向对方分别投射N枚和M枚导弹(发射时间,飞行时间,伤害值),同时两国各自都有防御系统 ...

  9. hihocoder-1391&&北京网赛09 Countries(优先队列)

    题目链接: Countries 时间限制:1000ms 单点时限:1000ms 内存限制:256MB 描述 There are two antagonistic countries, country ...

随机推荐

  1. mysql 递归查询

    1.创建表: DROP TABLE IF EXISTS `t_areainfo`; CREATE TABLE `t_areainfo` ( `id` ) ' AUTO_INCREMENT, `) ', ...

  2. R语言-用R眼看琅琊榜小说的正确姿势

    博客总目录:http://www.cnblogs.com/weibaar/p/4507801.html 目录: 零:写在前面的一些废话 一.R眼看琅琊榜的基本原理 1.导入数据 2.筛选数据 3.多条 ...

  3. JavaScript事件处理程序

    JavaScript中的事件处理程序主要分为3种: HTML事件处理程序: <script type="text/javascript"> // HTML事件处理程序 ...

  4. 深入理解使用ListView时ArrayAdapter、SimpleAdapter、BaseAdapter的原理

    在使用ListView的时候,我们传给setAdapter方法的Adapter通常是ArrayAdapter.SimpleAdapter.BaseAdapter,但是这几个Adapter内部究竟是什么 ...

  5. word20161215

    name / 名称 name mapping / 名称映射 name resolution / 名称解析 name server (NS) resource record / 名称服务器资源记录 na ...

  6. 安装rabbitmq

    安装配置epel源 $ rpm -ivh http://dl.fedoraproject.org/pub/epel/6/i386/epel-release-6-8.noarch.rpm 安装erlan ...

  7. Python之路,Day3 - Python基础3

    一.文件操作 对文件操作流程 打开文件,得到文件句柄并赋值给一个变量 通过句柄对文件进行操作 关闭文件 现有文件如下 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 ...

  8. Effective C++ -----条款55:让自己熟悉Boost

    Boost 是一个社群,也是一个网站.致力于免费.源码开放.同僚复审的C++ 程序库开发.Boost 在C++ 标准化过程中扮演深具影响力的角色. Boost 提供许多TR1 组件实现品,以及其他许多 ...

  9. errno.h

    linux 中c语言使用errno.h头文件来记录错误信息以及定义返回错误代码的宏. strerror(errno)打印错误信息 1. warning: implicit declaration of ...

  10. VC++ 一个简单的Log类

    在软件开发中,为程序建立Log日志是很必要的,它可以记录程序运行的状态以及出错信息,方便维护和调试. 下面实现了一个简单的Log类,使用非常简单,仅供参考. // CLogHelper.h : hea ...