【转】 Linux 线程同步的三种方法
线程的最大特点是资源的共享性,但资源共享中的同步问题是多线程编程的难点。linux下提供了多种方式来处理线程同步,最常用的是互斥锁、条件变量和信号量。
一、互斥锁(mutex)
通过锁机制实现线程间的同步。
- 初始化锁。在Linux下,线程的互斥量数据类型是pthread_mutex_t。在使用前,要对它进行初始化。
静态分配:pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER;
动态分配:int pthread_mutex_init(pthread_mutex_t *mutex, const pthread_mutex_attr_t *mutexattr); - 加锁。对共享资源的访问,要对互斥量进行加锁,如果互斥量已经上了锁,调用线程会阻塞,直到互斥量被解锁。
int pthread_mutex_lock(pthread_mutex *mutex);
int pthread_mutex_trylock(pthread_mutex_t *mutex); - 解锁。在完成了对共享资源的访问后,要对互斥量进行解锁。
int pthread_mutex_unlock(pthread_mutex_t *mutex); - 销毁锁。锁在是使用完成后,需要进行销毁以释放资源。
int pthread_mutex_destroy(pthread_mutex *mutex);
- #include <cstdio>
- #include <cstdlib>
- #include <unistd.h>
- #include <pthread.h>
- #include "iostream"
- using namespace std;
- pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER;
- int tmp;
- void* thread(void *arg)
- {
- cout << "thread id is " << pthread_self() << endl;
- pthread_mutex_lock(&mutex);
- tmp = 12;
- cout << "Now a is " << tmp << endl;
- pthread_mutex_unlock(&mutex);
- return NULL;
- }
- int main()
- {
- pthread_t id;
- cout << "main thread id is " << pthread_self() << endl;
- tmp = 3;
- cout << "In main func tmp = " << tmp << endl;
- if (!pthread_create(&id, NULL, thread, NULL))
- {
- cout << "Create thread success!" << endl;
- }
- else
- {
- cout << "Create thread failed!" << endl;
- }
- pthread_join(id, NULL);
- pthread_mutex_destroy(&mutex);
- return 0;
- }
- //编译:g++ -o thread testthread.cpp -lpthread
二、条件变量(cond)
互斥锁不同,条件变量是用来等待而不是用来上锁的。条件变量用来自动阻塞一个线程,直到某特殊情况发生为止。通常条件变量和互斥锁同时使用。条件变量分为两部分: 条件和变量。条件本身是由互斥量保护的。线程在改变条件状态前先要锁住互斥量。条件变量使我们可以睡眠等待某种条件出现。条件变量是利用线程间共享的全局变量进行同步的一种机制,主要包括两个动作:一个线程等待"条件变量的条件成立"而挂起;另一个线程使"条件成立"(给出条件成立信号)。条件的检测是在互斥锁的保护下进行的。如果一个条件为假,一个线程自动阻塞,并释放等待状态改变的互斥锁。如果另一个线程改变了条件,它发信号给关联的条件变量,唤醒一个或多个等待它的线程,重新获得互斥锁,重新评价条件。如果两进程共享可读写的内存,条件变量可以被用来实现这两进程间的线程同步。
- 初始化条件变量。
静态态初始化,pthread_cond_t cond = PTHREAD_COND_INITIALIER;
动态初始化,int pthread_cond_init(pthread_cond_t *cond, pthread_condattr_t *cond_attr); - 等待条件成立。释放锁,同时阻塞等待条件变量为真才行。timewait()设置等待时间,仍未signal,返回ETIMEOUT(加锁保证只有一个线程wait)
int pthread_cond_wait(pthread_cond_t *cond, pthread_mutex_t *mutex);
int pthread_cond_timewait(pthread_cond_t *cond,pthread_mutex *mutex,const timespec *abstime); - 激活条件变量。pthread_cond_signal,pthread_cond_broadcast(激活所有等待线程)
int pthread_cond_signal(pthread_cond_t *cond);
int pthread_cond_broadcast(pthread_cond_t *cond); //解除所有线程的阻塞 - 清除条件变量。无线程等待,否则返回EBUSY
int pthread_cond_destroy(pthread_cond_t *cond);
- #include <stdio.h>
- #include <pthread.h>
- #include "stdlib.h"
- #include "unistd.h"
- pthread_mutex_t mutex;
- pthread_cond_t cond;
- void hander(void *arg)
- {
- free(arg);
- (void)pthread_mutex_unlock(&mutex);
- }
- void *thread1(void *arg)
- {
- pthread_cleanup_push(hander, &mutex);
- while(1)
- {
- printf("thread1 is running\n");
- pthread_mutex_lock(&mutex);
- pthread_cond_wait(&cond, &mutex);
- printf("thread1 applied the condition\n");
- pthread_mutex_unlock(&mutex);
- sleep(4);
- }
- pthread_cleanup_pop(0);
- }
- void *thread2(void *arg)
- {
- while(1)
- {
- printf("thread2 is running\n");
- pthread_mutex_lock(&mutex);
- pthread_cond_wait(&cond, &mutex);
- printf("thread2 applied the condition\n");
- pthread_mutex_unlock(&mutex);
- sleep(1);
- }
- }
- int main()
- {
- pthread_t thid1,thid2;
- printf("condition variable study!\n");
- pthread_mutex_init(&mutex, NULL);
- pthread_cond_init(&cond, NULL);
- pthread_create(&thid1, NULL, thread1, NULL);
- pthread_create(&thid2, NULL, thread2, NULL);
- sleep(1);
- do
- {
- pthread_cond_signal(&cond);
- }while(1);
- sleep(20);
- pthread_exit(0);
- return 0;
- }
- #include <pthread.h>
- #include <unistd.h>
- #include "stdio.h"
- #include "stdlib.h"
- static pthread_mutex_t mtx = PTHREAD_MUTEX_INITIALIZER;
- static pthread_cond_t cond = PTHREAD_COND_INITIALIZER;
- struct node
- {
- int n_number;
- struct node *n_next;
- }*head = NULL;
- static void cleanup_handler(void *arg)
- {
- printf("Cleanup handler of second thread./n");
- free(arg);
- (void)pthread_mutex_unlock(&mtx);
- }
- static void *thread_func(void *arg)
- {
- struct node *p = NULL;
- pthread_cleanup_push(cleanup_handler, p);
- while (1)
- {
- //这个mutex主要是用来保证pthread_cond_wait的并发性
- pthread_mutex_lock(&mtx);
- while (head == NULL)
- {
- //这个while要特别说明一下,单个pthread_cond_wait功能很完善,为何
- //这里要有一个while (head == NULL)呢?因为pthread_cond_wait里的线
- //程可能会被意外唤醒,如果这个时候head != NULL,则不是我们想要的情况。
- //这个时候,应该让线程继续进入pthread_cond_wait
- // pthread_cond_wait会先解除之前的pthread_mutex_lock锁定的mtx,
- //然后阻塞在等待对列里休眠,直到再次被唤醒(大多数情况下是等待的条件成立
- //而被唤醒,唤醒后,该进程会先锁定先pthread_mutex_lock(&mtx);,再读取资源
- //用这个流程是比较清楚的
- pthread_cond_wait(&cond, &mtx);
- p = head;
- head = head->n_next;
- printf("Got %d from front of queue/n", p->n_number);
- free(p);
- }
- pthread_mutex_unlock(&mtx); //临界区数据操作完毕,释放互斥锁
- }
- pthread_cleanup_pop(0);
- return 0;
- }
- int main(void)
- {
- pthread_t tid;
- int i;
- struct node *p;
- //子线程会一直等待资源,类似生产者和消费者,但是这里的消费者可以是多个消费者,而
- //不仅仅支持普通的单个消费者,这个模型虽然简单,但是很强大
- pthread_create(&tid, NULL, thread_func, NULL);
- sleep(1);
- for (i = 0; i < 10; i++)
- {
- p = (struct node*)malloc(sizeof(struct node));
- p->n_number = i;
- pthread_mutex_lock(&mtx); //需要操作head这个临界资源,先加锁,
- p->n_next = head;
- head = p;
- pthread_cond_signal(&cond);
- pthread_mutex_unlock(&mtx); //解锁
- sleep(1);
- }
- printf("thread 1 wanna end the line.So cancel thread 2./n");
- //关于pthread_cancel,有一点额外的说明,它是从外部终止子线程,子线程会在最近的取消点,退出
- //线程,而在我们的代码里,最近的取消点肯定就是pthread_cond_wait()了。
- pthread_cancel(tid);
- pthread_join(tid, NULL);
- printf("All done -- exiting/n");
- return 0;
- }
三、信号量(sem)
如同进程一样,线程也可以通过信号量来实现通信,虽然是轻量级的。信号量函数的名字都以"sem_"打头。线程使用的基本信号量函数有四个。
- 信号量初始化。
int sem_init (sem_t *sem , int pshared, unsigned int value);
这是对由sem指定的信号量进行初始化,设置好它的共享选项(linux 只支持为0,即表示它是当前进程的局部信号量),然后给它一个初始值VALUE。 - 等待信号量。给信号量减1,然后等待直到信号量的值大于0。
int sem_wait(sem_t *sem); - 释放信号量。信号量值加1。并通知其他等待线程。
int sem_post(sem_t *sem); - 销毁信号量。我们用完信号量后都它进行清理。归还占有的一切资源。
int sem_destroy(sem_t *sem);
- #include <stdlib.h>
- #include <stdio.h>
- #include <unistd.h>
- #include <pthread.h>
- #include <semaphore.h>
- #include <errno.h>
- #define return_if_fail(p) if((p) == 0){printf ("[%s]:func error!/n", __func__);return;}
- typedef struct _PrivInfo
- {
- sem_t s1;
- sem_t s2;
- time_t end_time;
- }PrivInfo;
- static void info_init (PrivInfo* thiz);
- static void info_destroy (PrivInfo* thiz);
- static void* pthread_func_1 (PrivInfo* thiz);
- static void* pthread_func_2 (PrivInfo* thiz);
- int main (int argc, char** argv)
- {
- pthread_t pt_1 = 0;
- pthread_t pt_2 = 0;
- int ret = 0;
- PrivInfo* thiz = NULL;
- thiz = (PrivInfo* )malloc (sizeof (PrivInfo));
- if (thiz == NULL)
- {
- printf ("[%s]: Failed to malloc priv./n");
- return -1;
- }
- info_init (thiz);
- ret = pthread_create (&pt_1, NULL, (void*)pthread_func_1, thiz);
- if (ret != 0)
- {
- perror ("pthread_1_create:");
- }
- ret = pthread_create (&pt_2, NULL, (void*)pthread_func_2, thiz);
- if (ret != 0)
- {
- perror ("pthread_2_create:");
- }
- pthread_join (pt_1, NULL);
- pthread_join (pt_2, NULL);
- info_destroy (thiz);
- return 0;
- }
- static void info_init (PrivInfo* thiz)
- {
- return_if_fail (thiz != NULL);
- thiz->end_time = time(NULL) + 10;
- sem_init (&thiz->s1, 0, 1);
- sem_init (&thiz->s2, 0, 0);
- return;
- }
- static void info_destroy (PrivInfo* thiz)
- {
- return_if_fail (thiz != NULL);
- sem_destroy (&thiz->s1);
- sem_destroy (&thiz->s2);
- free (thiz);
- thiz = NULL;
- return;
- }
- static void* pthread_func_1 (PrivInfo* thiz)
- {
- return_if_fail(thiz != NULL);
- while (time(NULL) < thiz->end_time)
- {
- sem_wait (&thiz->s2);
- printf ("pthread1: pthread1 get the lock./n");
- sem_post (&thiz->s1);
- printf ("pthread1: pthread1 unlock/n");
- sleep (1);
- }
- return;
- }
- static void* pthread_func_2 (PrivInfo* thiz)
- {
- return_if_fail (thiz != NULL);
- while (time (NULL) < thiz->end_time)
- {
- sem_wait (&thiz->s1);
- printf ("pthread2: pthread2 get the unlock./n");
- sem_post (&thiz->s2);
- printf ("pthread2: pthread2 unlock./n");
- sleep (1);
- }
- return;
- }
转:http://blog.csdn.net/zsf8701/article/details/7844316
【转】 Linux 线程同步的三种方法的更多相关文章
- Linux 线程同步的三种方法(互斥锁、条件变量、信号量)
互斥锁 #include <cstdio> #include <cstdlib> #include <unistd.h> #include <pthread. ...
- Java中实现线程同步的三种方法
实现同步的三种方法 多线程共享数据时,会发生线程不安全的情况,多线程共享数据必须同步. 实现同步的三种方法: 使用同步代码块 使用同步方法 使用互斥锁ReetrantLock(更灵活的代码控制) 代码 ...
- java多线程二之线程同步的三种方法
java多线程的难点是在:处理多个线程同步与并发运行时线程间的通信问题.java在处理线程同步时,常用方法有: 1.synchronized关键字. 2.Lock显示加锁. 3.信号量Se ...
- JAVA之线程同步的三种方法
最近接触到一个图片加载的项目,其中有声明到的线程池等资源需要在系统中线程共享,所以就去研究了一下线程同步的知识,总结了三种常用的线程同步的方法,特来与大家分享一下.这三种方法分别是:synchroni ...
- Linux下线程同步的几种方法
Linux下提供了多种方式来处理线程同步,最常用的是互斥锁.条件变量和信号量. 一.互斥锁(mutex) 锁机制是同一时刻只允许一个线程执行一个关键部分的代码. 1. 初始化锁 int pthrea ...
- IOS 多线程,线程同步的三种方式
本文主要是讲述 IOS 多线程,线程同步的三种方式,更多IOS技术知识,请登陆疯狂软件教育官网. 一般情况下我们使用线程,在多个线程共同访问同一块资源.为保护线程资源的安全和线程访问的正确性. 在IO ...
- 归纳一下:C#线程同步的几种方法
转自原文 归纳一下:C#线程同步的几种方法 我们在编程的时候,有时会使用多线程来解决问题,比如你的程序需要在后台处理一大堆数据,但还要使用户界面处于可操作状态:或者你的程序需要访问一些外部资源如数据库 ...
- java中线程同步的几种方法
1.使用synchronized关键字 由于java的每个对象都有一个内置锁,当用此关键字修饰方法时, 内置锁会保护整个方法.在调用该方法前,需要获得内置锁,否则就处于阻塞状态. 注: synchro ...
- Java修炼——线程同步的俩种方法
当多线程去同时抢占CPU资源时,有多线程的安全问题.这时候就需要将线程同步.线程同步有俩个方法. 1.同步代码块(synchronize),同步代码块需要同步监视器,同步监视器是针对对象进行操作.什么 ...
随机推荐
- Nginx架构的企业级应用
Nginx架构的企业级应用 ==================================================== 实现HA高可用集群 实现LB负载均衡集群 Nginx实现反向代理 ...
- 命名空间std引用<iostream>时使用
所谓namespace,是指标识符的各种可见范围. C++标准程序库中的所有标识符都被定义于一个名为std的namespace中,这样命名空间std内定义的所有标识符都有效. 为什么把cout等放在s ...
- 仿word导航窗口的展开与折叠
// 标识是否是展开状态 bool isExtend = true; // 定义可以扩展的宽度 const int PanelWidth = 444; private void expandableS ...
- 走进Linux之systemd启动过程
Linux系统的启动方式有点复杂,而且总是有需要优化的地方.传统的Linux系统启动过程主要由著名的init进程(也被称为SysV init启动系统)处理,而基于init的启动系统被认为有效率不足的问 ...
- Spring 框架 详解 (一)
Spring是分层的JavaSE/EE full-stack(一站式) 轻量级开源框架 * 分层: * SUN提供的EE的三层结构:web层.业务层.数据访问层(持久层,集成层) * Struts2是 ...
- Python ftplib
http://automationtesting.sinaapp.com/blog/m_ftplib https://docs.python.org/2/library/ftplib.html 概述 ...
- CMD方式修改MySQL的root用户密码
1.CMD下,进行mysql的bin目录下; 2.输入mysql -u root -p,输入旧密码,进入mysql状态: 3.MySQL>use MySQL; 4.update user set ...
- Spring的核心机制——依赖注入(Dependency Inject)
Spring不仅提供对象,还提供对象的属性值,而不是由使用该对象的程序所提供的. Java应用是由一些相互协作的对象所组成的,在Spring中这种相互协作的关系就叫依赖关系. 如果A组件调用了B组件的 ...
- Redis 在新浪微博中的应用
Redis 在新浪微博中的应用 Redis简介 1. 支持5种数据结构 支持strings, hashes, lists, sets, sorted setsstring是很好的存储方式,用来做计数存 ...
- “System.Data.OracleClient.OracleConnection”已过时
处理办法: 在oracle 安装目录下 找到 Oracle.DataAccess.dll添加引用,然后 using Oracle.DataAccess.Client;其他的都不用动,即可.连接字符串中 ...