如何使用Linux命令 dhclient

The Internet Systems Consortium DHCP Client, dhclient, provides a means for configuring one or more network interfaces using the Dynamic Host Configuration Protocol, BOOTP protocol, or if these protocols fail, by statically assigning an address.

linux dhclient 的语法

dhclient [ -p port ] [ -d ] [ -e VAR=value ] [ -q ] [ -1 ] [ -r ] [ -lf lease-file ] [ -pf pid-file ] [ -cf config-file ] [ -sf script-file ] [ -e ENVVAR=value ] [ -s server ] [ -g relay ] [ -n ] [ -nw ] [ -w ] [ if0 [ ...ifN ] ]

-p port If the DHCP client should listen and transmit on a port other than the standard (port 68), the -p flag may used. It should be followed by the udp port number that dhclient should use. This is mostly useful for debugging purposes. If a different port is specified for the client to listen on and transmit on, the client will also use a different destination port - one greater than the specified destination port.
-s The DHCP client normally transmits any protocol messages it sends before acquiring an IP address to, 255.255.255.255, the IP limited broadcast address. For debugging purposes, it may be useful to have the server transmit these messages to some other address. This can be specified with the -s flag, followed by the IP address or domain name of the destination.
-g For testing purposes, the giaddr field of all packets that the client sends can be set using the -g flag, followed by the IP address to send. This is only useful for testing, and should not be expected to work in any consistent or useful way.
-d The DHCP client will normally run in the foreground until it has configured an interface, and then will revert to running in the background. To run force dhclient to always run as a foreground process, the -d flag should be specified. This is useful when running the client under a debugger, or when running it out of inittab on System V systems.
-e The dhclient daemon creates its own environment when executing the dhclient-script to do the grunt work of interface configuration. To define extra environment variables and their values, use the -e flag, followed by the environment variable name and value assignment, just as one would assign a variable in a shell. Eg: -e IF_METRIC=1
-r The client normally doesn't release the current lease as it is not required by the DHCP protocol. Some cable ISPs require their clients to notify the server if they wish to release an assigned IP address. The -r flag explicitly releases the current lease, and once the lease has been released, the client exits.
-1 The -1 flag cause dhclient to try once to get a lease. If it fails, dhclient exits with exit code two.
-cf, -lf, -pf, and -sf The DHCP client normally gets its configuration information from /etc/dhcp3/dhclient.conf, its lease database from /var/lib/dhcp3/dhclient.leases, stores its process ID in a file called /var/run/dhclient.pid, and configures the network interface using /sbin/dhclient-script To specify different names and/or locations for these files, use the -cf, -lf, -pf and -sf flags, respectively, followed by the name of the file. This can be particularly useful if, for example, /var/lib/dhcp3 or /var/run has not yet been mounted when the DHCP client is started.
-w The DHCP client normally exits if it isn't able to identify any network interfaces to configure. On laptop computers and other computers with hot-swappable I/O buses, it is possible that a broadcast interface may be added after system startup. The -w flag can be used to cause the client not to exit when it doesn't find any such interfaces. The omshell (1) program can then be used to notify the client when a network interface has been added or removed, so that the client can attempt to configure an IP address on that interface.
-n The DHCP client can be directed not to attempt to configure any interfaces using the -n flag. This is most likely to be useful in combination with the -w flag.
-nw The client can also be instructed to become a daemon immediately, rather than waiting until it has acquired an IP address. This can be done by supplying the -nw flag.
-e The client runs child processes (scripts) with a clean environment. Use the -e flag to specify additional environment variables to pass to child processes.

linux dhclient 的演示示例:

dhclient eth0

Renews the IP address.

Linux renew ip command
$ sudo dhclient -r //release ip 释放IP
$ sudo dhclient //获取IP


busybox提供的udhcpc命令的使用

# udhcpc --help
BusyBox v1.16.1 (-- :: CST) multi-call binary. Usage: udhcpc [-Cfbnqtvo] [-c CID] [-V VCLS] [-H HOSTNAME] [-i INTERFACE]
[-p pidfile] [-r IP] [-s script] [-O dhcp-option]... [-P N] -V,--vendorclass=CLASSID Vendor class identifier
-i,--interface=INTERFACE Interface to use (default eth0)
-H,-h,--hostname=HOSTNAME Client hostname
-c,--clientid=CLIENTID Client identifier
-C,--clientid-none Suppress default client identifier
-p,--pidfile=FILE Create pidfile
-r,--request=IP IP address to request
-s,--script=FILE Run FILE at DHCP events (default /usr/share/udhcpc/default.script)
-t,--retries=N Send up to N discover packets
-T,--timeout=N Pause between packets (default seconds)
-A,--tryagain=N Wait N seconds (default ) after failure
-O,--request-option=OPT Request DHCP option OPT (cumulative)
-o,--no-default-options Don't request any options (unless -O is also given)
-f,--foreground Run in foreground
-b,--background Background if lease is not immediately obtained
-S,--syslog Log to syslog too
-n,--now Exit with failure if lease is not immediately obtained
-q,--quit Quit after obtaining lease
-R,--release Release IP on quit
-P,--client-port N Use port N instead of default
-a,--arping Use arping to validate offered address

如何使用Linux命令dhclient的更多相关文章

  1. linux命令dhclient

    linux命令 dhclient 背景 多台服务器(CentOS7 系统)设置静态IP,其中有台服务器设置了静态IP后,只要重启就变更为其他的,但是配置文件并无改动. 使用命令 #自动获取IP dhc ...

  2. 一天一个Linux命令--dhclient

    dhclient -r #用于释放ip地址2 dhclient #获取IP地址 主要针对只有命令行的Linux机器,临时改变了网络环境,事先手动设置的ip地址 看一下自带的解释 root@ubuntu ...

  3. Linux命令整理中...

    Linux命令整理中... 最常用命令(我最近最常用的一般放在前面tipsbychsry) clear 清屏 date 显示日期 cal 显示日历 cal 2014 显示2014年的日历 shutdo ...

  4. wpa_supplicant 移植及 linux 命令行模式配置无线上网

    本文涉及内容为linux 命令行模式配置无线上网 及 wpa_supplicant 移植到开发板的过程,仅供参考. 1.源码下载 wpa_supplicant 源码下载地址 :http://hosta ...

  5. 这些Linux命令,让你的工作事半功倍!

    这些Linux命令,让你的工作事半功倍! 最近都在和Linux打交道,感觉还不错.我觉得Linux相比windows比较麻烦的就是很多东西都要用命令来控制,当然,这也是很多人喜欢linux的原因,比较 ...

  6. 《Linux命令学习手册》系列分享专栏

    <Linux命令学习手册>系列分享专栏 <Linux命令学习手册>已整理成PDF文档,点击可直接下载至本地查阅https://www.webfalse.com/read/207 ...

  7. Linux命令——pgrep

    参考:Linux pgrep Command Tutorial for Beginners (10 Examples) Linux命令——ps.pstree bash基础——grep.基本正则表达式. ...

  8. linux命令截取文件最后n行(所有命令)

    linux命令截取文件最后n行(所有命令) tail -n a.txt > b.txt 联想:系统信息 arch 显示机器的处理器架构(1) uname -m 显示机器的处理器架构(2) una ...

  9. 软件测试从业者必备的Linux命令(完整篇)

    观点: 关于Linux,测试从业者,看这篇文章就够了 . 具体,往下看 : 网上关于Linux资料太多.太杂,学习没有重点,特别是对于没有基础的从业者,期望通过那些文档,去自学掌握Linux,可能性太 ...

随机推荐

  1. 微信web调试工具

    做微信公众号开发的时候,最头疼的一件事,莫过于bug调试了. 由于有些功能涉及到权限问题,必须在微信公众号内打开,所以对开发人员来说就是遇到了一场噩梦. 这里有两种方法: 1.工具:mac.使用微信m ...

  2. <Stackoverflow> 如何提问

    如何提问 欢迎来到Stack Overflow! 我们很乐意帮助你,但是实际情况是并非每一个问题都能得到解决.为了提高你的机会,这儿有一些帮助: 1 检索及调查 在提出你的问题之前,你已经通过检索来寻 ...

  3. 总结的Ubuntu的若干小知识

    一.默认开机直接进入到Ubuntu命令行界面 安装Ubuntu后,开机会默认进入到图形界面,如果不喜欢图形界面,可以通过修改配置,直接进入命令行界面,还行节省100多兆的内存空间.具体方法如下: 修改 ...

  4. 转:高性能Mysql主从架构的复制原理及配置详解

    温习<高性能MySQL>的复制篇. 1 复制概述 Mysql内建的复制功能是构建大型,高性能应用程序的基础.将Mysql的数据分布到多个系统上去,这种分布的机制,是通过将Mysql的某一台 ...

  5. Linux数据流重定向

    一.什么是数据流重导向: 数据流重导向 (redirect) 由字面上的意思来看,好像就是将『数据传导到其他地方去』,没错-数据流重导向就是将某个命令运行后应该要出现在屏幕上的数据, 给他传输到其他的 ...

  6. codeforces 625C K-special Tables

    C. K-special Tables time limit per test 2 seconds memory limit per test 256 megabytes input standard ...

  7. VS~单步调试DLL

    有时我们从第三方下载DLL库之后,在使用VS进行调试时还是很麻烦的,现在我总结一下,在开发过过程中调试DLL的方法,希望对各位在开发中有帮助. 1 VS下载插件.Net Refector 2 引用你的 ...

  8. UdpClient的Connect究竟做了什么(转)

    最近在写一个音频通信的系统,因为需要还要处理其他事件,所以就自己设计底层的通信协议,用了不少底层的Socket编程(.Net Framework),搞清楚了不少细节问题. 先做一些铺垫工作.音频系统服 ...

  9. Unity3D-Baked Lightmapping 示例学习

    首先,看一下摄像机的Rendering Paths http://game.ceeger.com/Manual/RenderingPaths.html 可以看出,对于灯光的渲染质量 Deferred ...

  10. 在PHP中利用wsdl创建标准webservice

    参照整理: http://bbs.php100.com/read-htm-tid-95228.html http://www.ieliwb.com/wsdl-create-soapdiscovery/ ...