hp raid配置
http://www.cnblogs.com/zhangxinglong/p/5585139.html
[root@192e168e100e27 ~]# fdisk -l Disk /dev/nvme0n1: 1601.2 GB, bytes, sectors
Units = sectors of * = bytes
Sector size (logical/physical): bytes / bytes
I/O size (minimum/optimal): bytes / bytes Disk /dev/nvme1n1: 1601.2 GB, bytes, sectors
Units = sectors of * = bytes
Sector size (logical/physical): bytes / bytes
I/O size (minimum/optimal): bytes / bytes Disk /dev/sdm: 480.1 GB, bytes, sectors
Units = sectors of * = bytes
Sector size (logical/physical): bytes / bytes
I/O size (minimum/optimal): bytes / bytes
Disk label type: dos
Disk identifier: 0x00017fe7 Device Boot Start End Blocks Id System
/dev/sdm1 * Linux
/dev/sdm2 c W95 FAT32 (LBA)
Partition does not start on physical sector boundary. Disk /dev/sda: 4000.8 GB, bytes, sectors
Units = sectors of * = bytes
Sector size (logical/physical): bytes / bytes
I/O size (minimum/optimal): bytes / bytes Disk /dev/sdb: 4000.8 GB, bytes, sectors
Units = sectors of * = bytes
Sector size (logical/physical): bytes / bytes
I/O size (minimum/optimal): bytes / bytes Disk /dev/sdf: 4000.8 GB, bytes, sectors
Units = sectors of * = bytes
Sector size (logical/physical): bytes / bytes
I/O size (minimum/optimal): bytes / bytes Disk /dev/sdc: 4000.8 GB, bytes, sectors
Units = sectors of * = bytes
Sector size (logical/physical): bytes / bytes
I/O size (minimum/optimal): bytes / bytes Disk /dev/sdg: 4000.8 GB, bytes, sectors
Units = sectors of * = bytes
Sector size (logical/physical): bytes / bytes
I/O size (minimum/optimal): bytes / bytes Disk /dev/sdd: 4000.8 GB, bytes, sectors
Units = sectors of * = bytes
Sector size (logical/physical): bytes / bytes
I/O size (minimum/optimal): bytes / bytes Disk /dev/sde: 4000.8 GB, bytes, sectors
Units = sectors of * = bytes
Sector size (logical/physical): bytes / bytes
I/O size (minimum/optimal): bytes / bytes Disk /dev/sdj: 4000.8 GB, bytes, sectors
Units = sectors of * = bytes
Sector size (logical/physical): bytes / bytes
I/O size (minimum/optimal): bytes / bytes Disk /dev/sdl: 4000.8 GB, bytes, sectors
Units = sectors of * = bytes
Sector size (logical/physical): bytes / bytes
I/O size (minimum/optimal): bytes / bytes Disk /dev/sdk: 4000.8 GB, bytes, sectors
Units = sectors of * = bytes
Sector size (logical/physical): bytes / bytes
I/O size (minimum/optimal): bytes / bytes Disk /dev/sdh: 4000.8 GB, bytes, sectors
Units = sectors of * = bytes
Sector size (logical/physical): bytes / bytes
I/O size (minimum/optimal): bytes / bytes Disk /dev/sdi: 4000.8 GB, bytes, sectors
Units = sectors of * = bytes
Sector size (logical/physical): bytes / bytes
I/O size (minimum/optimal): bytes / bytes
查看raid卡信息
[root@192e168e100e27 yum.repos.d]# hpssacli ctrl all show status Smart HBA H240 in Slot (RAID Mode)
Controller Status: OK 查看raid状态
[root@192e168e100e27 yum.repos.d]# hpssacli ctrl slot= ld all show Smart HBA H240 in Slot array A logicaldrive (447.1 GB, RAID , OK) 查看物理硬盘状态
[root@192e168e100e27 yum.repos.d]# hpssacli ctrl slot= pd all show status physicaldrive 1I:: (port 1I:box :bay , 480.1 GB): OK
physicaldrive 1I:: (port 1I:box :bay , 480.1 GB): OK 查看物理硬盘
[root@192e168e100e27 yum.repos.d]# hpssacli ctrl slot= pd all show Smart HBA H240 in Slot array A physicaldrive 1I:: (port 1I:box :bay , Solid State SATA, 480.1 GB, OK)
physicaldrive 1I:: (port 1I:box :bay , Solid State SATA, 480.1 GB, OK) 查看裸机磁盘信息
[root@192e168e100e27 ~]# hpssacli ctrl slot= logicaldrive show Smart HBA H240 in Slot array A Logical Drive:
Size: 447.1 GB
Fault Tolerance:
Heads:
Sectors Per Track:
Cylinders:
Strip Size: KB
Full Stripe Size: KB
Status: OK
MultiDomain Status: OK
Caching: Disabled
Unique Identifier: 600508B1001C4E74DC449B2B39F2C592
Disk Name: /dev/sdm Mount Points: / 447.0 GB Partition Number
OS Status: LOCKED
Logical Drive Label: 00307D90PDNNK0BRH970WR8DA0
Mirror Group :
physicaldrive 1I:: (port 1I:box :bay , Solid State SATA, 480.1 GB, OK)
Mirror Group :
physicaldrive 1I:: (port 1I:box :bay , Solid State SATA, 480.1 GB, OK)
Drive Type: Data
LD Acceleration Method: HP SSD Smart Pat [root@192e168e100e27 ~]# hpssacli ctrl slot= physicaldrive 1I:: show Smart HBA H240 in Slot array A physicaldrive 1I::
Port: 1I
Box:
Bay:
Status: OK
Drive Type: Data Drive
Interface Type: Solid State SATA
Size: 480.1 GB
Native Block Size:
Firmware Revision: 4IYVHPG1
Serial Number: PHYS738102JD480BGN
Model: ATA VK000480GWJPE
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C):
Maximum Temperature (C):
Usage remaining: 99.98%
Power On Hours:
Estimated Life Remaining based on workload to date: days
SSD Smart Trip Wearout: False
PHY Count:
PHY Transfer Rate: .0Gbps
Drive Authentication Status: OK
Carrier Application Version:
Carrier Bootloader Version:
列出RAID卡控制器的信息
[root@192e168e100e62 ~]# hpssacli
HP Smart Storage Administrator CLI 2.0.22.0
Detecting Controllers...Done.
Type "help" for a list of supported commands.
Type "exit" to close the console. => ctrl all show detail config Smart HBA H240 in Slot (RAID Mode)
Bus Interface: PCI
Slot:
Serial Number: PDNNK0BRH970NI
Cache Serial Number: PDNNK0BRH970NI
RAID (ADG) Status: Disabled
Controller Status: OK
Hardware Revision: B
Firmware Version: 5.52
Rebuild Priority: High
Surface Scan Delay: secs
Surface Scan Mode: Idle
Queue Depth: Automatic
Monitor and Performance Delay: min
Elevator Sort: Enabled
Degraded Performance Optimization: Disabled
Inconsistency Repair Policy: Disabled
Wait for Cache Room: Disabled
Surface Analysis Inconsistency Notification: Disabled
Post Prompt Timeout: secs
Cache Board Present: False
Drive Write Cache: Disabled
Total Cache Size: MB
SATA NCQ Supported: True
Spare Activation Mode: Activate on physical drive failure (default)
Controller Temperature (C):
Number of Ports: Internal only
Encryption: Disabled
Encryption Login Status: Not Logged In
Encryption Allow Plaintext Volumes: Disallow
Encryption Key Management Mode: Not Set
Encryption Supported: True
Encryption RTC SRAM Status: Passed
Encryption Master Key reset in Progress: False
Encryption Local Key Cache Enabled: False
Encryption Crypto Officer Password: Not Set
Encryption User Password: Not Set
Encryption License Installed: True
Encryption FW Locked for Update: Unlocked
Encryption Controller Password: Not Set
Encryption Local Key Cache Supported: True
Encryption Controller Locked: Unlocked
Encryption Has Suspended Controller Password: False
Encryption Controller Password Unlock Attempts Remaining:
Encryption Logical Drive(s) Locked For Missing Controller Password: False
Encryption Password Recovery Parameters Set: False
Encryption Master Key: Not Set
Encryption Remote Mode Master Key Mismatch: False
Encryption/HP SSD Smart Path Mixing Supported: True
Encryption/HP SmartCache Mixing Supported: False
Driver Name: hpsa
Driver Version: 3.4.
Driver Supports HP SSD Smart Path: True
Negotiated PCIe Data Rate: PCIe 3.0 x8 ( MB/s)
Controller Mode: RAID Mode
Controller Mode Reboot: Not Required
Latency Scheduler Setting: Disabled
Current Power Mode: MaxPerformance Internal Drive Cage at Port 1I, Box , OK
Power Supply Status: Not Redundant
Serial Number:
Drive Bays:
Port: 1I
Box:
Location: Internal Physical Drives
Smart HBA H240 in Slot
physicaldrive 1I:: (port 1I:box :bay , Solid State SATA, 480.1 GB, OK)
Smart HBA H240 in Slot
physicaldrive 1I:: (port 1I:box :bay , Solid State SATA, 480.1 GB, OK) Array: A
Interface Type: Solid State SATA
Unused Space: MB
Status: OK
MultiDomain Status: OK
Array Type: Data
HP SSD Smart Path: enable Logical Drive:
Size: 447.1 GB
Fault Tolerance:
Heads:
Sectors Per Track:
Cylinders:
Strip Size: KB
Full Stripe Size: KB
Status: OK
MultiDomain Status: OK
Caching: Disabled
Unique Identifier: 600508B1001C2D64A75B6E41A3467347
Disk Name: /dev/sdm Mount Points: / 447.0 GB Partition Number
OS Status: LOCKED
Logical Drive Label: 003083A1PDNNK0BRH970NI35AF
Mirror Group :
Smart HBA H240 in Slot
physicaldrive 1I:: (port 1I:box :bay , Solid State SATA, 480.1 GB, OK)
Mirror Group :
Smart HBA H240 in Slot
physicaldrive 1I:: (port 1I:box :bay , Solid State SATA, 480.1 GB, OK)
Drive Type: Data
LD Acceleration Method: HP SSD Smart Path physicaldrive 1I::
Port: 1I
Box:
Bay:
Status: OK
Drive Type: Data Drive
Interface Type: Solid State SATA
Size: 480.1 GB
Native Block Size:
Firmware Revision: 4IYVHPG1
Serial Number: PHYS738102HC480BGN
Model: ATA VK000480GWJPE
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C):
Maximum Temperature (C):
Usage remaining: 99.98%
Power On Hours:
Estimated Life Remaining based on workload to date: days
SSD Smart Trip Wearout: False
PHY Count:
PHY Transfer Rate: .0Gbps
Drive Authentication Status: OK
Carrier Application Version:
Carrier Bootloader Version: physicaldrive 1I::
Port: 1I
Box:
Bay:
Status: OK
Drive Type: Data Drive
Interface Type: Solid State SATA
Size: 480.1 GB
Native Block Size:
Firmware Revision: 4IYVHPG1
Serial Number: PHYS738200FN480BGN
Model: ATA VK000480GWJPE
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C):
Maximum Temperature (C):
Usage remaining: 99.98%
Power On Hours:
Estimated Life Remaining based on workload to date: days
SSD Smart Trip Wearout: False
PHY Count:
PHY Transfer Rate: .0Gbps
Drive Authentication Status: OK
Carrier Application Version:
Carrier Bootloader Version: 6
hp raid配置的更多相关文章
- hp raid json
hp机器均已在装OS之前划好raid,统一规格为2*480G SSD, 12*4T SATA ,2*1.6T SSD,其中2*480G SSD做系统盘,划分raid1 已知disk controlle ...
- 服务器RAID配置全程与RAID基础知识
服务器RAID配置全程 一.RAID介绍 RAID是Redundent Array of Inexpensive Disks的缩写,直译为“廉价冗余磁盘阵列”,也简称为“磁盘阵列”.后来RAID中的字 ...
- CentOS6软raid配置与管理
事先添加硬盘设备sdb.sdc.sdd.sde.无论是物理硬盘还是虚拟硬盘,最好使用同型号同大小的硬盘. 创建raid设备 支持raid0.1.4.5.6级别 # mdadm -C /dev/md0 ...
- (转)Ctrl+H 浪潮Raid配置文档
说明 本手册适用于LSI芯片Raid卡 包括但不限于Inspur 2008/2108 Raid卡.LSI 9240/9260/9261/9271 等Raid卡. 不同型号的Raid卡在某些功能上的支持 ...
- Ctrl+H 浪潮Raid配置文档
说明 本手册适用于LSI芯片Raid卡 包括但不限于Inspur 2008/2108 Raid卡.LSI 9240/9260/9261/9271 等Raid卡. 不同型号的Raid卡在某些功能上的支持 ...
- LSI SAS3008 RAID配置方法
7.1 概述 LSI SAS3008 RAID 控制卡(以下简称LSI SAS3008)是基于Fusion-MPT™ (消息传递技术)架构的8端口12Gbit/s SAS控制器,并采用PCIe3.0 ...
- 浪潮服务器NF84260M3安装Windows server 2012 R2 RAID配置
这里是已经做了RAID6,再做系统 浪潮服务器NF84260M3 U盘启动,光盘刻录 Windows server 2012 R2 镜像,地址:迅雷下载,ed2k://|file|cn_windows ...
- 服务器硬件和RAID配置
服务器 硬件和RAID配置 目录 一.RAID 磁盘阵列介绍 1.1.RAID 0(条带化存储) 1.2.RAID 1(镜像存储) 1.3.RAID 5 1.4.RAID 6 1.5.RAID 1+0 ...
- 服务器硬件及RAID配置实践
服务器硬件及RAID配置实践 1.RAID磁盘阵列介绍 2.创建RAID磁盘阵列 1.RAID:中文简称为独立冗余磁盘阵列 把多块独立的物理硬盘按不同的方式组合起来形成一个硬盘组(逻辑硬盘),从而提供 ...
随机推荐
- 2017.10.26 JavaWeb----第五章 JavaBean技术
JavaWeb----第五章 JavaBean技术 (1)JavaBean技术 JavaBean技术是javaweb程序的重要组成部分,是一个可重复使用的软件组件,是用Java语言编写的.遵循一定的标 ...
- Vuex进阶
1.插件 下面以一个对state进行持久化存储的插件为例进行介绍: 代码结构: saveInLocal.js export default function (store) { if (localSt ...
- MFC项目依赖 BCG框架示例
1.创建一个简单的MFC工程: 2.将BCG框架项目导入到新建的mfc解决方案中,例如将BCGCBPro\BCGCBPRO140.vcxproj添加到解决方案. 3.修改mfc项目属性,包含BCG框架 ...
- BZOJ1562: [NOI2009]变换序列(二分图 匈牙利)
Description Input Output Sample Input 5 1 1 2 2 1 Sample Output 1 2 4 0 3 HINT 30%的数据中N≤50:60%的数据中N≤ ...
- 【学时总结】◆学时·VIII◆ 树形DP
◆学时·VIII◆ 树形DP DP像猴子一样爬上了树……QwQ ◇ 算法概述 基于树的模型,由于树上没有环,满足DP的无后效性,可以充分发挥其强大统计以及计算答案的能力. 一般来说树形DP的状态定义有 ...
- CentOS 6.5通过yum安装 MySQL-5.5
1.安装mysql-5.5的yum源 rpm -ivh http://repo.mysql.com/yum/mysql-5.5-community/el/6/x86_64/mysql-communit ...
- Scala构建元数据
反射方式构建元数据: 通过反射来获取RDD中的Schema信息.这种方式适合于列名(元数据)已知的情况下 步骤: 1.SparkConf配置环境 2.SparkContext初始化上下文 3.SQLC ...
- qt5.10.1编译记录
qt版本更新比较快,不知道选哪个版本合适,故选择一个较新版本的. 平台imx6 + linux4.1.16 + qt5.10.1 采用明远智睿提供的编译器:fsl-imx-fb-g ...
- C++基础 const
1. C中的const C中const变量只是只读变量,有自己存储空间.可能被存放在 栈.堆.数据段,所以可以修改. 2. C++中const 可能分配空间,也可能不分配空间. 当 const 为全局 ...
- Aizu:0009- Prime Number
Prime Number Time limit 1000 ms Memory limit 131072 kB Problem Description Write a program which rea ...