交叉编译libudev

一、交叉编译libudev
下载udev-182.tar.xz

下载网址：https://mirrors.edge.kernel.org/pub/linux/utils/kernel/hotplug/

#tar -xvf udev-182.tar.xz

# cd udev-182

# mkdir build
# export PATH=/gcc-linaro-7.2.1-2017.11-x86_64_aarch64-linux-gnu/bin:$PATH
# vim udev-182/build-aux/config.sub
 245 case $basic_machine in
 246         # Recognize the basic CPU types without company name.
 247         # Some are omitted here because they have special meanings below.
 248         1750a | 580 \
 249         | a29k \
 250         | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
 251         | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
 252         | am33_2.0 \
 253         | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 |aarch64 \
 254         | be32 | be64 \
 255         | bfin \

# ./configure --host=aarch64-linux-gnu --prefix=/udev-182/build CC=aarch64-linux-gnu-gcc AR=aarch64-linux-gnu-ar

 configure 配置问题：
1> configure: error: Package requirements (libkmod >= 5) were not met:No package 'libkmod' found
2> configure: error: Package requirements (blkid >= 2.20) were not met:No package 'blkid' found
3> configure: error: Package requirements (glib-2.0 >= 2.22.0 gobject-2.0 >= 2.22.0) were not met: No package 'glib-2.0' found No package 'gobject-2.0' found
    等等这类问题只需要安装这些库即可：
# apt-get install libkmod-dev libblkid-dev libglib2.0-dev

4> configure: error: pci.ids not found, try --with-pci-ids-path=
    解决该问题需要找到系统中的 pci.ids 然后指定
# ./configure --host=aarch64-linux-gnu --prefix=/udev-182/build CC=aarch64-linux-gnu-gcc AR=aarch64-linux-gnu-ar --with-pci-ids-path=/usr/share/misc/pci.ids
5> configure: error: Package requirements (gobject-introspection-1.0 >= 0.6.2) were not met:No package 'gobject-introspection-1.0' found

libudev编译出错太多，没有完全编译成功，后改为编译eudev，获取libudev.so

二、交叉编译eudev
eudev下载路径：https://dev.gentoo.org/~blueness/eudev/

# tar -xvf eudev-3.2.5.tar.gz
# cd eudev-3.2.5
# mkdir build
# export PATH=/gcc-linaro-7.2.1-2017.11-x86_64_aarch64-linux-gnu/bin:$PATH
# ./configure --host=aarch64-linux-gnu --prefix=/eudev-3.2.5/build/ CC=aarch64-linux-gnu-gcc AR=aarch64-linux-gnu-ar --disable-blkid --disable-kmod 
# make 
# make install 
# ls /eudev-3.2.5/build/ 
　　bin etc include lib sbin share