Ubuntu下串口工具

一、Kermit

1.安装：

sudo apt-get install ckermit

2.配置：

sudo gedit /etc/kermit/kermrc

3.在文件末端添加如下内容 ：

set line /dev/ttyUSB0
set speed
set carrier-watch off
set handshake none
set flow-control none
robust
set file type bin
set file name lit
set rec pack
set send pack
set window 

4.启动

启动kermit，连接串口:

hyx@ubuntu:~ $ sudo kermit
[sudo] password for hyx:
?SET SPEED has no effect without prior SET LINE
C-Kermit 9.0. OPEN SOURCE:,  Aug , for Linux+SSL+KRB5
 Copyright (C) , ,
  Trustees of Columbia University in the City of New York.
Type ? or HELP for help.
(/home/gec/) C-Kermit>connect

二、minicom

1.安装

suodo apt-get install minicom  

2.配置

sudo minicom -s

            +-----[configuration]------+
            | Filenames and paths      |
            | File transfer protocols  |
            | Serial port setup        |选择此项！！！！
            | Modem and dialing        |
            | Screen and keyboard      |
            | Save setup as dfl        |
            | Save setup as..          |
            | Exit                     |
            | Exit from Minicom        |
            +--------------------------+

    +-----------------------------------------------------------------------+
    | A -    Serial Device      : /dev/ttyUSB0                              |//修改为自己/dev/下的ttyUSB*  ls /dev/tyyUSB*
    | B - Lockfile Location     : /var/lock                                 |
    | C -   Callin Program      :                                           |
    | D -  Callout Program      :                                           |
    | E -    Bps/Par/Bits       :  8N1                                |
    | F - Hardware Flow Control : No                                        |
    | G - Software Flow Control : Yes                                       |
    |                                                                       |
    |    Change which setting?                                              |
    +-----------------------------------------------------------------------+
            | Screen and keyboard      |
            | Save setup as dfl        |
            | Save setup as..          |
            | Exit                     |
            | Exit from Minicom        |
            +--------------------------+

            +-----[configuration]------+
            | Filenames and paths      |
            | File transfer protocols  |
            | Serial port setup        |
            | Modem and dialing        |
            | Screen and keyboard      |
            | Save setup as dfl        |//1 在设置完记得保存！！！
            | Save setup as..          |
            | Exit                     |//2 退出
            | Exit from Minicom        |
            +--------------------------+

在之后使用时，只需要输入minicom即可

注：如果出现乱码问题，换条usb转串口线即可