在osx 10.11之前cocopods问题不多，但是升级到11之后的版本，之前的cocopods大多用不了，需要重新安装，对于我这种使用测试版系统的技术狂来说，每次都需要重新安装很多东西，

当然，cocopods也避免不了安装很多次了。

对于新手来说，使用cocopods开发，还是节省了相当多的开发时间，以下便是cocopods安装和安装过程中遇到的问题及解决办法：

新电脑新系统测试安装！

【注：可以直接从第二步开始安装】
2、出现以下问题，大家不要慌：
 
1 boai:~ boai$ sudo gem install cocoapods

2 ERROR:  Could not find a valid gem 'cocoapods' (>= 0), here is why:

3           Unable to download data from http://ruby.taobao.org/ - bad response Not Found 404 (http://ruby.taobao.org/specs.4.8.gz)

4 boai:~ boai$ sudo gem install cocoapods

5 ERROR:  Could not find a valid gem 'cocoapods' (>= 0), here is why:

6           Unable to download data from http://ruby.taobao.org/ - bad response Not Found 404 (http://ruby.taobao.org/specs.4.8.gz)

7 boai:~ boai$ sudo gem update --system

8 ERROR:  While executing gem ... (Gem::RemoteFetcher::FetchError)

9     bad response Not Found 404 (http://ruby.taobao.org/specs.4.8.gz)

解决办法：

（1）先执行下面两行代码：

1 sudo gem sources -r https://rubygems.org

2 sudo gem sources -a http://rubygems.org

（2）执行过程如下：

1 boai:~ boai$ sudo gem sources -r https://rubygems.org

2 source https://rubygems.org not present in cache

3 boai:~ boai$ sudo gem sources -a http://rubygems.org

4 https://rubygems.org is recommended for security over http://rubygems.org

5

6 Do you want to add this insecure source? [yn]  y

最后会提示

Do you want to add this insecure source? [yn]  
你选择 y就行了
然后出现：
http://rubygems.org added to sources

这就说明成功了，就可以执行下面的安装了。

在2016年7月1日开始，会出现以下错误，

rvm: command not found Mac

activesupport requires Ruby version >= 2.2.2.

这两种错误的解决办法如下;

强烈建议 使用rvm安装ruby

1、安装 RVM

RVM:Ruby Version Manager,Ruby版本管理器，包括Ruby的版本管理和Gem库管理(gemset)

  1. $ curl -L get.rvm.io | bash -s stable

等待一段时间后就可以成功安装好 RVM。

  1. $ source ~/.bashrc
  2. $ source ~/.bash_profile

测试是否安装正常

rvm -v

 2、用RVM升级Ruby
  1. #查看当前ruby版本
  2. $ ruby -v
  3. ruby 1.8.7
  4. #列出已知的ruby版本
  5. $ rvm list known
  6. #安装ruby 2.3.0

  7. boaideMacBook:~ boai$ rvm install 2.3.0

期间会让你输入两次回车键，记得哦，别像我一样傻等了半天，以为网卡呢， 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
boaideMacBook:~ boai$ rvm install 2.3.0
Searching for binary rubies, this might take some time.
No binary rubies available for: osx/10.11/x86_64/ruby-2.3.0.
Continuing with compilation. Please read 'rvm help mount' to get more information on binary rubies.
Checking requirements for osx.
About to install Homebrew, press `Enter` for default installation in `/usr/local`,
type new path if you wish custom Homebrew installation (the path needs to be writable for user)
:
==> This script will install:
/usr/local/bin/brew
/usr/local/Library/...
/usr/local/share/doc/homebrew
/usr/local/share/man/man1/brew.1
/usr/local/share/zsh/site-functions/_brew
/usr/local/etc/bash_completion.d/brew
==> The following directories will be made group writable:
/usr/local/.
==> The following directories will have their owner set to boai:
/usr/local/.
==> The following directories will have their group set to admin:
/usr/local/.
 
Press RETURN to continue or any other key to abort
==> /usr/bin/sudo /bin/chmod g+rwx /usr/local/.
Password:
==> /usr/bin/sudo /usr/sbin/chown boai /usr/local/.
==> /usr/bin/sudo /usr/bin/chgrp admin /usr/local/.
==> /usr/bin/sudo /bin/mkdir /Users/boai/Library/Caches/Homebrew
==> /usr/bin/sudo /bin/chmod g+rwx /Users/boai/Library/Caches/Homebrew
==> /usr/bin/sudo /usr/sbin/chown boai /Users/boai/Library/Caches/Homebrew
==> Downloading and installing Homebrew...
remote: Counting objects: 520, done.
remote: Compressing objects: 100% (461/461), done.
remote: Total 520 (delta 30), reused 318 (delta 28), pack-reused 0
Receiving objects: 100% (520/520), 786.43 KiB | 146.00 KiB/s, done.
Resolving deltas: 100% (30/30), done.
From https://github.com/Homebrew/brew
 * [new branch]      master     -> origin/master
HEAD is now at 5768e32 test-bot: fix coverage on Travis CI
==> Tapping homebrew/core
Cloning into '/usr/local/Library/Taps/homebrew/homebrew-core'...
remote: Counting objects: 3718, done.
remote: Compressing objects: 100% (3605/3605), done.
remote: Total 3718 (delta 7), reused 2085 (delta 4), pack-reused 0
Receiving objects: 100% (3718/3718), 2.89 MiB | 521.00 KiB/s, done.
Resolving deltas: 100% (7/7), done.
Checking connectivity... done.
Tapped 3596 formulae (3,744 files, 9.0M)
==> Installation successful!
==> Next steps
Run `brew help` to get started
Further documentation: https://git.io/brew-docs
==> Homebrew has enabled anonymous aggregate user behaviour analytics
Read the analytics documentation (and how to opt-out) here:
  https://git.io/brew-analytics
Installing requirements for osx.
Updating system.....
Installing required packages: autoconf, automake, libtool, pkg-config, libyaml, readline, libksba, openssl........
Certificates in '/usr/local/etc/openssl/cert.pem' are already up to date.
Requirements installation successful.
Installing Ruby from source to: /Users/boai/.rvm/rubies/ruby-2.3.0, this may take a while depending on your cpu(s)...
ruby-2.3.0 - #downloading ruby-2.3.0, this may take a while depending on your connection...
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 13.5M  100 13.5M    0     0  3078k      0  0:00:04  0:00:04 --:--:-- 3477k
ruby-2.3.0 - #extracting ruby-2.3.0 to /Users/boai/.rvm/src/ruby-2.3.0....
ruby-2.3.0 - #configuring....................................................

时间比较长：

安装成功后提示:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
ruby-2.3.0 - #downloading ruby-2.3.0, this may take a while depending on your connection...
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 13.5M  100 13.5M    0     0  3078k      0  0:00:04  0:00:04 --:--:-- 3477k
ruby-2.3.0 - #extracting ruby-2.3.0 to /Users/boai/.rvm/src/ruby-2.3.0....
ruby-2.3.0 - #configuring......................................................|
ruby-2.3.0 - #post-configuration.
ruby-2.3.0 - #compiling........................................................|
ruby-2.3.0 - #installing.........
ruby-2.3.0 - #making binaries executable..
Installed rubygems 2.5.1 is newer than 2.4.8 provided with installed ruby, skipping installation, use --force to force installation.
ruby-2.3.0 - #gemset created /Users/boai/.rvm/gems/ruby-2.3.0@global
ruby-2.3.0 - #importing gemset /Users/boai/.rvm/gemsets/global.gems............|
ruby-2.3.0 - #generating global wrappers........
ruby-2.3.0 - #gemset created /Users/boai/.rvm/gems/ruby-2.3.0
ruby-2.3.0 - #importing gemsetfile /Users/boai/.rvm/gemsets/default.gems evaluated to empty gem list
ruby-2.3.0 - #generating default wrappers........
ruby-2.3.0 - #adjusting #shebangs for (gem irb erb ri rdoc testrb rake).
Install of ruby-2.3.0 - #complete
Ruby was built without documentation, to build it run: rvm docs generate-ri
boaideMacBook:~ boai$

然后再执行这句代码:

1 boai:~ boai$ sudo gem install cocoapods
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
boaideMacBook:~ boai$ sudo gem install cocoapods
Password:
Fetching: i18n-0.7.0.gem (100%)
Successfully installed i18n-0.7.0
Fetching: thread_safe-0.3.5.gem (100%)
Successfully installed thread_safe-0.3.5
Fetching: tzinfo-1.2.2.gem (100%)
Successfully installed tzinfo-1.2.2
Fetching: concurrent-ruby-1.0.2.gem (100%)
Successfully installed concurrent-ruby-1.0.2
Fetching: activesupport-5.0.0.gem (100%)
Successfully installed activesupport-5.0.0
Fetching: nap-1.1.0.gem (100%)
Successfully installed nap-1.1.0
Fetching: fuzzy_match-2.0.4.gem (100%)
Successfully installed fuzzy_match-2.0.4
Fetching: cocoapods-core-1.0.1.gem (100%)
Successfully installed cocoapods-core-1.0.1
Fetching: claide-1.0.0.gem (100%)
Successfully installed claide-1.0.0
Fetching: cocoapods-deintegrate-1.0.0.gem (100%)
Successfully installed cocoapods-deintegrate-1.0.0
Fetching: cocoapods-downloader-1.1.0.gem (100%)
Successfully installed cocoapods-downloader-1.1.0
Fetching: cocoapods-plugins-1.0.0.gem (100%)
Successfully installed cocoapods-plugins-1.0.0
Fetching: cocoapods-search-1.0.0.gem (100%)
Successfully installed cocoapods-search-1.0.0
Fetching: cocoapods-stats-1.0.0.gem (100%)
Successfully installed cocoapods-stats-1.0.0
Fetching: netrc-0.7.8.gem (100%)
Successfully installed netrc-0.7.8
Fetching: cocoapods-trunk-1.0.0.gem (100%)
Successfully installed cocoapods-trunk-1.0.0
Fetching: cocoapods-try-1.1.0.gem (100%)
Successfully installed cocoapods-try-1.1.0
Fetching: molinillo-0.4.5.gem (100%)
Successfully installed molinillo-0.4.5
Fetching: colored-1.2.gem (100%)
Successfully installed colored-1.2
Fetching: xcodeproj-1.2.0.gem (100%)
Successfully installed xcodeproj-1.2.0
Fetching: escape-0.0.4.gem (100%)
Successfully installed escape-0.0.4
Fetching: fourflusher-0.3.2.gem (100%)
Successfully installed fourflusher-0.3.2
Fetching: cocoapods-1.0.1.gem (100%)
Successfully installed cocoapods-1.0.1
Parsing documentation for i18n-0.7.0
Installing ri documentation for i18n-0.7.0
Parsing documentation for thread_safe-0.3.5
Installing ri documentation for thread_safe-0.3.5
Parsing documentation for tzinfo-1.2.2
Installing ri documentation for tzinfo-1.2.2
Parsing documentation for concurrent-ruby-1.0.2
Installing ri documentation for concurrent-ruby-1.0.2
Parsing documentation for activesupport-5.0.0
Installing ri documentation for activesupport-5.0.0
Parsing documentation for nap-1.1.0
Installing ri documentation for nap-1.1.0
Parsing documentation for fuzzy_match-2.0.4
Installing ri documentation for fuzzy_match-2.0.4
Parsing documentation for cocoapods-core-1.0.1
Installing ri documentation for cocoapods-core-1.0.1
Parsing documentation for claide-1.0.0
Installing ri documentation for claide-1.0.0
Parsing documentation for cocoapods-deintegrate-1.0.0
Installing ri documentation for cocoapods-deintegrate-1.0.0
Parsing documentation for cocoapods-downloader-1.1.0
Installing ri documentation for cocoapods-downloader-1.1.0
Parsing documentation for cocoapods-plugins-1.0.0
Installing ri documentation for cocoapods-plugins-1.0.0
Parsing documentation for cocoapods-search-1.0.0
Installing ri documentation for cocoapods-search-1.0.0
Parsing documentation for cocoapods-stats-1.0.0
Installing ri documentation for cocoapods-stats-1.0.0
Parsing documentation for netrc-0.7.8
Installing ri documentation for netrc-0.7.8
Parsing documentation for cocoapods-trunk-1.0.0
Installing ri documentation for cocoapods-trunk-1.0.0
Parsing documentation for cocoapods-try-1.1.0
Installing ri documentation for cocoapods-try-1.1.0
Parsing documentation for molinillo-0.4.5
Installing ri documentation for molinillo-0.4.5
Parsing documentation for colored-1.2
Installing ri documentation for colored-1.2
Parsing documentation for xcodeproj-1.2.0
Installing ri documentation for xcodeproj-1.2.0
Parsing documentation for escape-0.0.4
Installing ri documentation for escape-0.0.4
Parsing documentation for fourflusher-0.3.2
Installing ri documentation for fourflusher-0.3.2
Parsing documentation for cocoapods-1.0.1
Installing ri documentation for cocoapods-1.0.1
Done installing documentation for i18n, thread_safe, tzinfo, concurrent-ruby, activesupport, nap, fuzzy_match, cocoapods-core, claide, cocoapods-deintegrate, cocoapods-downloader, cocoapods-plugins, cocoapods-search, cocoapods-stats, netrc, cocoapods-trunk, cocoapods-try, molinillo, colored, xcodeproj, escape, fourflusher, cocoapods after 24 seconds
23 gems installed
boaideMacBook:~ boai$

这就代表安装成功了！

3、安装cocopods

执行下面的语句：

1 sudo gem install cocoapods

据说新版本改了，没有验证，大家可以试试看：

1
sudo gem install -n /usr/local/bin cocoapods

会出现下面的界面：（激动。。。）

boai:~ boai$ sudo gem install cocoapods

Fetching: nap-1.0.0.gem (100%)

Successfully installed nap-1.0.0

Fetching: thread_safe-0.3.5.gem (100%)

Successfully installed thread_safe-0.3.5

Fetching: tzinfo-1.2.2.gem (100%)

Successfully installed tzinfo-1.2.2

Fetching: i18n-0.7.0.gem (100%)

Successfully installed i18n-0.7.0

Fetching: activesupport-4.2.5.gem (100%)

Successfully installed activesupport-4.2.5

Fetching: escape-0.0.4.gem (100%)

Successfully installed escape-0.0.4

Fetching: colored-1.2.gem (100%)

Successfully installed colored-1.2

Fetching: molinillo-0.4.0.gem (100%)

Successfully installed molinillo-0.4.0

Fetching: netrc-0.7.8.gem (100%)

Successfully installed netrc-0.7.8

Fetching: cocoapods-trunk-0.6.4.gem (100%)

Successfully installed cocoapods-trunk-0.6.4

Fetching: cocoapods-try-0.5.1.gem (100%)

Successfully installed cocoapods-try-0.5.1

Fetching: cocoapods-stats-0.6.2.gem (100%)

Successfully installed cocoapods-stats-0.6.2

Fetching: cocoapods-search-0.1.0.gem (100%)

Successfully installed cocoapods-search-0.1.0

Fetching: cocoapods-plugins-0.4.2.gem (100%)

Successfully installed cocoapods-plugins-0.4.2

Fetching: cocoapods-downloader-0.9.3.gem (100%)

Successfully installed cocoapods-downloader-0.9.3

Fetching: claide-0.9.1.gem (100%)

Successfully installed claide-0.9.1

Fetching: xcodeproj-0.28.2.gem (100%)

Successfully installed xcodeproj-0.28.2

Fetching: fuzzy_match-2.0.4.gem (100%)

Successfully installed fuzzy_match-2.0.4

Fetching: cocoapods-core-0.39.0.gem (100%)

Successfully installed cocoapods-core-0.39.0

Fetching: cocoapods-0.39.0.gem (100%)

Successfully installed cocoapods-0.39.0

Parsing documentation for nap-1.0.0

Installing ri documentation for nap-1.0.0

Parsing documentation for thread_safe-0.3.5

Installing ri documentation for thread_safe-0.3.5

Parsing documentation for tzinfo-1.2.2

Installing ri documentation for tzinfo-1.2.2

Parsing documentation for i18n-0.7.0

Installing ri documentation for i18n-0.7.0

Parsing documentation for activesupport-4.2.5

Installing ri documentation for activesupport-4.2.5

Parsing documentation for escape-0.0.4

Installing ri documentation for escape-0.0.4

Parsing documentation for colored-1.2

Installing ri documentation for colored-1.2

Parsing documentation for molinillo-0.4.0

Installing ri documentation for molinillo-0.4.0

Parsing documentation for netrc-0.7.8

Installing ri documentation for netrc-0.7.8

Parsing documentation for cocoapods-trunk-0.6.4

Installing ri documentation for cocoapods-trunk-0.6.4

Parsing documentation for cocoapods-try-0.5.1

Installing ri documentation for cocoapods-try-0.5.1

Parsing documentation for cocoapods-stats-0.6.2

Installing ri documentation for cocoapods-stats-0.6.2

Parsing documentation for cocoapods-search-0.1.0

Installing ri documentation for cocoapods-search-0.1.0

Parsing documentation for cocoapods-plugins-0.4.2

Installing ri documentation for cocoapods-plugins-0.4.2

Parsing documentation for cocoapods-downloader-0.9.3

Installing ri documentation for cocoapods-downloader-0.9.3

Parsing documentation for claide-0.9.1

Installing ri documentation for claide-0.9.1

Parsing documentation for xcodeproj-0.28.2

Installing ri documentation for xcodeproj-0.28.2

Parsing documentation for fuzzy_match-2.0.4

Installing ri documentation for fuzzy_match-2.0.4

Parsing documentation for cocoapods-core-0.39.0

Installing ri documentation for cocoapods-core-0.39.0

Parsing documentation for cocoapods-0.39.0

Installing ri documentation for cocoapods-0.39.0

Done installing documentation for nap, thread_safe, tzinfo, i18n, activesupport, escape, colored, molinillo, netrc, cocoapods-trunk, cocoapods-try, cocoapods-stats, cocoapods-search, cocoapods-plugins, cocoapods-downloader, claide, xcodeproj, fuzzy_match, cocoapods-core, cocoapods after 21 seconds

WARNING:  Unable to pull data from 'http://ruby.taobao.org/': bad response Not Found 404 (http://ruby.taobao.org/specs.4.8.gz)

20 gems installed

看到最后一行代码，你就放120个心吧。。。

然后就可以查看你的pods版本了：

输入：pod

然后会出现下面的代码：

boai:~ boai$ pod

Usage:

    $ pod COMMAND

      CocoaPods, the Cocoa library package manager.

Commands:

    + cache      Manipulate the CocoaPods cache

    + init       Generate a Podfile for the current directory.

    + install    Install project dependencies to Podfile.lock versions

    + ipc        Inter-process communication

    + lib        Develop pods

    + list       List pods

    + outdated   Show outdated project dependencies

    + plugins    Show available CocoaPods plugins

    + repo       Manage spec-repositories

    + search     Search for pods.

    + setup      Setup the CocoaPods environment

    + spec       Manage pod specs

    + trunk      Interact with the CocoaPods API (e.g. publishing new specs)

    + try        Try a Pod!

    + update     Update outdated project dependencies and create new

                 Podfile.lock

Options:

    --silent     Show nothing

    --version    Show the version of the tool

    --verbose    Show more debugging information

    --no-ansi    Show output without ANSI codes

    --help       Show help banner of specified command

boai:~ boai$

这就安装成功了，就可以正常使用pod了。。。

4、接下来就可以在项目中使用了，

打开终端：

cd 你的项目路径

boai:~ boai$ cd /Users/boai/Documents/博爱项目/BAPDCViewTest

然后：输入touch podfile  或者 pod init (会自动生成podfile文件)

boai:BAPDCViewTest boai$ pod init

boai:BAPDCViewTest boai$ pod install

接下来出现：

Last login: Fri Nov 20 11:02:59 on ttys006

boai:~ boai$ cd /Users/boai/Documents/博爱项目/BAPDCViewTest 

boai:BAPDCViewTest boai$ touch podfile

boai:BAPDCViewTest boai$ pod install

Updating local specs repositories

Analyzing dependencies

Downloading dependencies

Generating Pods project

Integrating client project

[!] Please close any current Xcode sessions and use `BAPDCViewTest.xcworkspace` for this project from now on.

Sending stats

Pod installation complete! There are 0 dependencies from the Podfile and 0 total

pods installed.

[!] [!] The Podfile does not contain any dependencies.

boai:BAPDCViewTest boai$

这就成功了，然后再看看你的项目路径里面，是不是多出来很多文件？

如下图：

然后双击***.workspace 文件就可以使用pods了！

5、新版本pod 安装问题：

podfile升级之后到最新版本，pod里的内容必须明确指出所用第三方库的target，否则会出现The dependency `` is not used in any concrete target这样的错误。

以下从三个步骤陈述：

4.1. Podfile升级

查看pod版本：

1
pod --version

pod 升级（此时是升级到1.0.0.beta.2版本）：

1
sudo gem install cocoapods --pre

4.2. 错误内容：

我的Podfile的内容是：

1
pod ‘SDWebImage‘, ‘3.6‘

pod install后出现错误The dependency `` is not used in any concrete target

1
2
3
4
5
6
7
8
pod install
/System/Library/Frameworks/Ruby.framework/Versions/2.0/usr/lib/ruby/2.0.0/universal-darwin14/rbconfig.rb:213: warning: Insecure world writable dir /Applications/Cocos/tools/ant/bin in PATH, mode 040777
Re-creating CocoaPods due to major version update.
Updating local specs repositories
Analyzing dependencies
 
 
The dependency `SDWebImage (= 3.6)` is not used in any concrete target.

4.3. 修改方法：

Podfile内容更改：

步骤：

4.3.1 双击双击***.workspace 文件，打开项目

4.3.2 拉到最下面，找到pods，打开后点击podfile文件，

4.3.3 在podfile里面添加所需要的三方库

最终的podfile 文件规范内容为下：

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
# Uncomment this line to define a global platform for your project
# platform :ios, '8.0'
# Uncomment this line if you're using Swift
# use_frameworks!<br><br># 注意：xcodeproj '***.xcodeproj'  这句新版本必须要写上，***为你的工程名字，最下面记得要加上  @end
xcodeproj 'BABaseProject.xcodeproj'
 
 
# 去掉由pod引入的第三方库的警告，需要更新命令才生效
inhibit_all_warnings!
 
target 'BABaseProject' do
     
    # 对系统原生的AutoLayout 的 NSLayoutConstraints类的封装，优雅的链式语法，GitHub 排名第三
    pod 'Masonry', '~> 0.6.4'
    # 两个都是自动布局框架
    pod 'SDAutoLayout', '~> 1.31'
 
    # 自定义button框架
    pod 'BAButton', '~> 1.0.1'
 
end
 
target 'BABaseProjectTests' do
     
end
 
target 'BABaseProjectUITests' do
     
end

4.3.4 完成podfile 的内容更改后，记得 cmd + s 保存更改，然后打开终端

4.3.5  在终端中cd 项目路径，打开项目后，输入：

1
2
3
4
5
6
7
8
9
pod install --verbose --no-repo-update
 
pod update --verbose --no-repo-update
 
或者
 
pod install --no-repo-update
 
pod update --no-repo-update

然后看你的项目路径pod下面， 是不是已经添加了你所需要的三方库呢？

如果更新pod 的时候出现这个问题：

安装cocoapods遇到error: RPC failed; curl 56 SSLRead() return error -36问题

解决办法如下：终端输入以下代码：

<code
 class="hljs cs has-numbering" style="display: block; padding: 0px;
color: inherit; box-sizing: border-box;
font-family: 'Source Code Pro', monospace;font-size:undefined;
white-space: pre; border-top-left-radius: 0px; border-top-right-radius:
0px; border-bottom-right-radius: 0px; border-bottom-left-radius: 0px;
word-wrap: normal; background-position: initial initial;
background-repeat: initial initial;">sudo xcode-<span
class="hljs-keyword" style="color: rgb(0, 0, 136); box-sizing:
border-box;">select</span> -<span class="hljs-keyword"
style="color: rgb(0, 0, 136); box-sizing:
border-box;">switch</span>
/Applications/Xcode.app/Contents/Developers</code><ul
class="pre-numbering" style="box-sizing: border-box; position: absolute;
 width: 50px; top: 0px; left: 0px;
 margin: 0px; padding: 6px 0px 40px; border-right-width: 1px;
border-right-style: solid; border-right-color: rgb(221, 221, 221);
list-style: none; text-align: right;"><li style="box-sizing:
border-box; padding: 0px 5px;">1</li></ul><ul
class="pre-numbering" style="box-sizing: border-box; position: absolute;
 width: 50px; top: 0px; left: 0px;
 margin: 0px; padding: 6px 0px 40px; border-right-width: 1px;
border-right-style: solid; border-right-color: rgb(221, 221, 221);
list-style: none; text-align: right;"><li style="box-sizing:
border-box; padding: 0px 5px;">1</li></ul>

然后再更新pod试试！

如果出现这个：

1
[!] xcodeproj was renamed to `project`. Please use that from now on.

只需要将这里的名字改过来就行了：

 1 # Uncomment this line to define a global platform for your project

 2 # platform :ios, '8.0'

 3 # Uncomment this line if you're using Swift

 4 # use_frameworks!

 5

 6 project 'BABaseProject.project'

 7

 8

 9 # 去掉由pod引入的第三方库的警告，需要更新命令才生效

10 inhibit_all_warnings!

11

12 # pod 快速更新方法

13 # pod update --verbose --no-repo-update

14

15 target 'BABaseProject' do

iOS cocopods安装使用和安装过程中遇到的问题及解决办法的更多相关文章

  1. iOS 学习笔记二【cocopods安装使用和安装过程中遇到的问题及解决办法】【20160725更新】

    在osx 10.11之前cocopods问题不多,但是升级到11之后的版本,之前的cocopods大多用不了,需要重新安装,对于我这种使用测试版系统的技术狂来说,每次都需要重新安装很多东西, 当然,c ...

  2. oracle安装过程中先决条件检查失败的解决办法

    1:公司数据库开始用的mysql,因为公司做的是保密性项目,所以就在项目日志过多的时候项目有爆炸的迹象啊(3000千万数据,貌似mysql有点撑不住).然后组长开始让我安装oracle,公司的内网也是 ...

  3. 记一次wordpress安装过程中遇到的问题及解决办法

    Q:无法建立目录wp-content/uploads/2017/03.有没有上级目录的写权限?A:执行chmod 777 wp-content/ 提升目录权限 Q:安装主题或安装插件的时候,用到FTP ...

  4. ZABBIX安装过程中relocation error报错解决办法

    错误提示: /usr/sbin/zabbix_server: relocation error: /usr/sbin/zabbix_server: symbol mysql_next_result, ...

  5. vs 2015 结合新配置的IIS 发布网站过程中遇到的问题及解决办法？

    1.由于扩展配置问题而无法提供您请求的页面.如果该页面是脚本,请添加处理程序 错误: HTTP 错误 404.3 - Not Found 由于扩展配置问题而无法提供您请求的页面.如果该页面是脚本,请添 ...

  6. QT4编程过程中遇到的问题及解决办法

    1.QLineEdit显示内容的格式函数: QLineEdit *lineEditPassword = new QLineEdit: lineEditPassword -> setEchoMod ...

  7. windows下python-nmap运行过程中出现的问题及解决办法

    python-nmap 运行时出现了一下错误 D:\python\untitled5\Scripts\python.exe D:/python/untitled5/test.py Traceback ...

  8. win10下安装Wampservice过程中遇到的问题及解决办法

    今天在电脑上装Wampserver的时候遇到了几个问题,启动Wampserver无法成功,一直显示橙色.若启动成功Wampserver的图标会显示绿色. 下面的是解决方法 安装 在浏览器中搜索Wamp ...

  9. Linux安装pytorch的具体过程以及其中出现问题的解决办法

    1.安装Anaconda 安装步骤参考了官网的说明:https://docs.anaconda.com/anaconda/install/linux.html 具体步骤如下: 首先,在官网下载地址 h ...

随机推荐

  1. demo02

    class PhoneNumber(): def __init__(self,number): self.a=number[1:4] self.b=number[6:9] self.c=number[ ...

  2. PHP微信公众平台

    微信公众平台客户中心微信公众平台开发文档微信公众平台自定义菜单微信公众平台开发(一) 配置接口微信公众平台开发(二) 微信公众平台示例代码分析微信公众平台开发(三) 订阅事件(subscribe)处理 ...

  3. HDUOJ--1874 畅通工程续

    畅通工程续 Time Limit: 3000/1000 MS (Java/Others)    Memory Limit: 32768/32768 K (Java/Others)Total Submi ...

  4. HDUOJ---2110

    Crisis of HDU Time Limit: 3000/1000 MS (Java/Others)    Memory Limit: 32768/32768 K (Java/Others)Tot ...

  5. Foundations of Machine Learning: Boosting

    Foundations of Machine Learning: Boosting Boosting是属于自适应基函数(Adaptive basis-function Model(ABM))中的一种模 ...

  6. 【LeetCode】31. Next Permutation (2 solutions)

    Next Permutation Implement next permutation, which rearranges numbers into the lexicographically nex ...

  7. XP如何开启3389端口远程桌面

    http://zhidao.baidu.com/question/311670471.html 在Windows 2000/XP/Server 2003中要查看端口,可以使用Netstat命令:依次点 ...

  8. Jsp通过Filter实现UrlRewriter原理

    web.xml文件: <?xml version="1.0" encoding="UTF-8"?> <web-app version=&quo ...

  9. python学习笔记——多进程间通信——Linux信号基础

    1 信号的基本描述 Signal信号(其全程为软中断信号)是Linux系统编程中非常重要的概念,信号是异步进程中通信的一种方式. 作用是通知进程发生了异步事件.进程之间可以调用系统来传递信号, 本身内 ...

  10. 摘：用ADO操作数据库的方法步骤

    用ADO操作数据库的方法步骤 ADO接口简介 ADO库包含三个基本接口:_ConnectionPtr接口._CommandPtr接口和_RecordsetPtr接口. _ConnectionPtr接口 ...