centos ifconfig 无法使用问题

# ifconfig
bash: ifconfig: command not found
# yum search ifconfig
Loaded plugins: fastestmirror, ovl
Loading mirror speeds from cached hostfile
* base: mirrors.163.com
* extras: mirrors.zju.edu.cn
* updates: mirror.bit.edu.cn
==================================== Matched: ifconfig ====================================
net-tools.x86_64 : Basic networking tools
# yum install net-tools.x86_64
Loaded plugins: fastestmirror, ovl
Loading mirror speeds from cached hostfile
* base: mirrors.163.com
* extras: mirrors.zju.edu.cn
* updates: mirror.bit.edu.cn
Resolving Dependencies
--> Running transaction check
---> Package net-tools.x86_64 0:2.0-0.22.20131004git.el7 will be installed
--> Finished Dependency Resolution Dependencies Resolved ===========================================================================================
Package Arch Version Repository Size
===========================================================================================
Installing:
net-tools x86_64 2.0-0.22.20131004git.el7 base 305 k Transaction Summary
===========================================================================================
Install 1 Package Total download size: 305 k
Installed size: 917 k
Is this ok [y/d/N]: y
Downloading packages:
net-tools-2.0-0.22.20131004git.el7.x86_64.rpm | 305 kB 00:00:00
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : net-tools-2.0-0.22.20131004git.el7.x86_64 1/1
Verifying : net-tools-2.0-0.22.20131004git.el7.x86_64 1/1 Installed:
net-tools.x86_64 0:2.0-0.22.20131004git.el7 Complete!
# ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 172.17.0.3 netmask 255.255.0.0 broadcast 172.17.255.255
ether 02:42:ac:11:00:03 txqueuelen 0 (Ethernet)
RX packets 287 bytes 337662 (329.7 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 207 bytes 13882 (13.5 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 1 (Local Loopback)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

centos ifconfig 无法使用问题的更多相关文章

  1. CentOS7系统ifconfig无法使用的解决方法

    在使用RAKsmart美国服务器的时候,如果安装的CentOS7操作系统的话,可能会经常用到“ifconfig”命令.ifconfig命令大多是用于CentOS 6版本下面,主要用于查看网卡配置信息. ...

  2. Linux系统ifconfig命令找不到,centos ifconfig Command not found

    centos ifconfig Command not found,Linux系统ifconfig命令找不到 >>>>>>>>>>>& ...

  3. Centos 5 无法使用ifconfig命令

    问题原因,在环境变量里没有包含文件夹 / sbin , 该文件夹下存有 ifconfig, 可以在终端下 cat /etc/profile, 可以发现没有关于 / sbin 的环境变量 解决方法:vi ...

  4. CentOS 7 无法使用中文输入法

    已经在安装CentOS时设置了中文输入法,在"设置"-"区域与语言"选项里也可以看到如下图所示的界面,但在文档中切换后无法使用的问题:

  5. centos下无法使用lsof命令"-bash: lsof: command not found"

    1.问题描述 : 在CentOS下,使用lsof命令,报错如下: 2.解决方法: #yum install lsof 若输入y不能安装成功,通过yum install 包 -y 进行安装: # yum ...

  6. centos7.0安装后ifconfig无法使用

    由于使用的最小化安装,需要安装net-tools 输入如下命令: #yum install -y net-tools 即可

  7. CentOS ifconfig无IP地址解决办法

    修改/etc/sysconfig/network-scripts/ifcfg-ens33 把 ONBOOT 改为 yes,重启后就会有ip,且物理机和虚拟机可以互相ping通了.

  8. CentOS中无法使用setup命令 -bash:setup: command not found

    出现这个问题是因为 Minimal 安装模式 所以并没有安装 setuptool 软件. 解决办法为: 使用yum 源直接下载安装 或者 去下载 setuptool 软件包安装 #安装setuptoo ...

  9. 虚拟机下安装 CentOS 7 的几个小问题

    ※ 网络问题(Destination Host Unreachable) 安装时网络选择的"桥接"模式, 安装完毕,并配置IP地址后,发现只能ping通自己,局域网内的其他IP无法 ...

随机推荐

  1. npm run build报错(npm ERR! code ELIFECYCLE)的解决办法

    具体报错如下图: 环境:centos7 应该node_modules安装问题,我们需要重新安装 rm -rf node_modules rm package-lock.json npm cache c ...

  2. MySQL和Oracle的比较

    可以从以下几个方面来进行比较: (1) 对事务的提交    MySQL默认是自动提交,而Oracle默认不自动提交,需要用户手动提交,需要在写commit;指令或者点击commit按钮(2) 分页查询 ...

  3. mysql8忘记登录密码时,修改密码方法

    一.停止mysqld进程 systemctl stop mysqld.service 二.修改/etc/my.cnf(在mysqld选项添加skip-grant-tables),设置免密码登录: vi ...

  4. About SQL Server 2016 CPT2

    SQL Server 2016 CTP2已经发布,可以从以下主页进行下载. http://www.microsoft.com/en-us/server-cloud/products/sql-serve ...

  5. STM32F407 串口通信:分类&常见接口 个人笔记

    串行通信的分类 常见串行通信接口 STM32 UART STM32串口异步通信需要定义的参数: ① 起始位 ② 数据位(8位或者9位) ③ 奇偶校验位(如果有的话是第9位) ④ 停止位(1,15,2位 ...

  6. 【Linux】date命令用法详解(日期格式)

    inux下date命令用法 date [OPTION]… [+FORMAT] date [-u|--utc|--universal] [MMDDhhmm[[CC]YY][.ss]] date命令参数 ...

  7. [luoguP1877] [HAOI2012]音量调节(DP)

    传送门 绝世傻DP #include <cstdio> #include <iostream> #define N 51 int n, s, mx; bool f[N][100 ...

  8. Servlet表单数据处理

    以下内容引用自http://wiki.jikexueyuan.com/project/servlet/form-data.html: 当需要从浏览器到Web服务器传递一些信息并最终传回到后台程序时,一 ...

  9. mysql排序关于英文字母abcd..xyz排序。

    mysql会自动进行比如pxj,pyj. 再根据p进行排序时候,会自动进行第二个字母的排序 select * from tbl_actor where first_char like 'p%' ord ...

  10. 【SSH 基础】浅谈Hibernate--入门篇

    Hibernate是什么 Hibernate是一个轻量级的ORMapping框架 ORMapping原理(Object Relational Mapping)就是把对象里面的数据和数据库里面的数据,依 ...