centos7之zabbix的监控H3C ER3200G2流量

1.首先在服务器端安装snmp工具

yum -y install net-snmp-utils snmp-libs snmp-devel snmp

　　启动snmpd服务

systemctl start snmpd
systemctl enable snmpd

2、更改配置文件。

vim /etc/snmp/snmpd.conf

com2sec notConfigUser  default       public

group   notConfigGroup v1           notConfigUser
group   notConfigGroup v2c           notConfigUser

view    systemview    included   .1.3.6.1.2.1.1
view    systemview    included   .1.3.6.1.2.1.25.1.1
view    systemview    included   .1

access  notConfigGroup ""      any       noauth    exact  all none none

proc mountd
proc ntalkd 4
proc sendmail 10 1
disk / 10000
load 12 14 14

重启snmpd服务

systemctl restart snmpd

3.检测与路由器的连通性（注意，这里必须要H3C ER3200G2开启snmp服务的网关路由器IP地址）

打开路由器snmp功能

snmpwalk  -v 2c -c private 路由器wan口地址

 SNMPv2-MIB::sysDescr. = STRING: H3C Product Version ERHMG2-MNW100-R1115^M
 H3C ERHMG2^M
 Copyright(c) - New H3C Technologies Co., Ltd. All rights reserved.
 SNMPv2-MIB::sysObjectID. = OID: SNMPv2-SMI::enterprises.25506.1.
 DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: ()  days, ::03.00
 SNMPv2-MIB::sysContact. = STRING: R&D Hangzhou, New H3C Technologies Co., Ltd.
 SNMPv2-MIB::sysName. = STRING: H3C
 SNMPv2-MIB::sysLocation. = STRING: Hangzhou, China
 SNMPv2-MIB::sysServices. = INTEGER:
 SNMPv2-MIB::sysORLastChange. = Timeticks: () ::00.47
 SNMPv2-MIB::sysORID. = OID: SNMPv2-MIB::snmpMIB
 SNMPv2-MIB::sysORID. = OID: TCP-MIB::tcpMIB
 SNMPv2-MIB::sysORID. = OID: IP-MIB::ip
 SNMPv2-MIB::sysORID. = OID: UDP-MIB::udpMIB
 SNMPv2-MIB::sysORID. = OID: SNMP-VIEW-BASED-ACM-MIB::vacmBasicGroup
 SNMPv2-MIB::sysORID. = OID: SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliance
 SNMPv2-MIB::sysORID. = OID: SNMP-MPD-MIB::snmpMPDCompliance
 SNMPv2-MIB::sysORID. = OID: SNMP-USER-BASED-SM-MIB::usmMIBCompliance
 SNMPv2-MIB::sysORDescr. = STRING: The MIB module for SNMPv2 entities
 SNMPv2-MIB::sysORDescr. = STRING: The MIB module for managing TCP implementations
 SNMPv2-MIB::sysORDescr. = STRING: The MIB module for managing IP and ICMP implementations
 SNMPv2-MIB::sysORDescr. = STRING: The MIB module for managing UDP implementations
 SNMPv2-MIB::sysORDescr. = STRING: View-based Access Control Model for SNMP.
 SNMPv2-MIB::sysORDescr. = STRING: The SNMP Management Architecture MIB.
 SNMPv2-MIB::sysORDescr. = STRING: The MIB for Message Processing and Dispatching.
 SNMPv2-MIB::sysORDescr. = STRING: The management information definitions for the SNMP User-based Security Model.
 SNMPv2-MIB::sysORUpTime. = Timeticks: () ::00.46
 SNMPv2-MIB::sysORUpTime. = Timeticks: () ::00.46
 SNMPv2-MIB::sysORUpTime. = Timeticks: () ::00.46
 SNMPv2-MIB::sysORUpTime. = Timeticks: () ::00.46
 SNMPv2-MIB::sysORUpTime. = Timeticks: () ::00.46
 SNMPv2-MIB::sysORUpTime. = Timeticks: () ::00.47
 SNMPv2-MIB::sysORUpTime. = Timeticks: () ::00.47
 SNMPv2-MIB::sysORUpTime. = Timeticks: () ::00.47
 IF-MIB::ifNumber. = INTEGER:
 IF-MIB::ifIndex. = INTEGER:
 IF-MIB::ifIndex. = INTEGER:
 IF-MIB::ifIndex. = INTEGER:
 IF-MIB::ifIndex. = INTEGER:
 IF-MIB::ifIndex. = INTEGER:
 IF-MIB::ifIndex. = INTEGER:
 IF-MIB::ifDescr. = STRING: WAN1
 IF-MIB::ifDescr. = STRING: WAN2
 ...........................底下还有很多行

4、添加监控项

添加主机群组

添加主机

添加模板

添加成功，但是你会发现图形没有，我这里是已经添加完了

点击图形

下面这个图可能要等好一会，SNMP才会把信息传过来，所以耐性等它检测出来，然后选择我们要监控的WAN口，然后创建图形。

我这里添加图形，选择WAN1口的上传和下载监控项。

添加完成后预览，确认无误后，点击添加。

日常查看。