安装 glusterfs yum源报错
yum install glusterfs-server
yum 一直报错 把/etc/yum.repos.d 备份 删除了所有文件,从测试机192..168.59.128上同步过来 一直报错
已加载插件:fastestmirror
base | 3.6 kB 00:00:00
http://mirror.centos.org/%24contentdir/7/storage/x86_64/gluster-4.1/repodata/repomd.xml: [Errno 14] HTTP Error 404 - Not Found
正在尝试其它镜像。
To address this issue please refer to the below knowledge base article
https://access.redhat.com/articles/1320623
If above article doesn't help to resolve this issue please create a bug on https://bugs.centos.org/
One of the configured repositories failed (CentOS-7 - Gluster 4.1 (Long Term Maintanance)),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:
1. Contact the upstream for the repository and get them to fix the problem.
2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).
3. Run the command with the repository temporarily disabled
yum --disablerepo=centos-gluster41 ...
4. Disable the repository permanently, so yum won't use it by default. Yum
will then just ignore the repository until you permanently enable it
again or use --enablerepo for temporary usage:
yum-config-manager --disable centos-gluster41
or
subscription-manager repos --disable=centos-gluster41
5. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:
yum-config-manager --save --setopt=centos-gluster41.skip_if_unavailable=true
failure: repodata/repomd.xml from centos-gluster41: [Errno 256] No more mirrors to try.
http://mirror.centos.org/$contentdir/7/storage/x86_64/gluster-4.1/repodata/repomd.xml: [Errno 14] HTTP Error 404 - Not Found
[root@linux-node1 ~]# ping www.baidu.com
PING www.a.shifen.com (14.215.177.39) 56(84) bytes of data.
64 bytes from 14.215.177.39 (14.215.177.39): icmp_seq=1 ttl=128 time=15.6 ms
64 bytes from 14.215.177.39 (14.215.177.39): icmp_seq=2 ttl=128 time=15.8 ms
^C
--- www.a.shifen.com ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1001ms
rtt min/avg/max/mdev = 15.662/15.779/15.897/0.172 ms
原因 128安装了glusterFS /etc//etc/yum.repos.d 下多了文件CentOS-Gluster-4.1.repo
在129上 文件CentOS-Gluster-4.1.repo 删除 就不报错了
安装 glusterfs yum源报错的更多相关文章
- linux -小记(3) 问题:linux 安装epel扩展源报错
EPEL提供的软件包大多基于其对应的Fedora软件包,不会与企业版Linux发行版本的软件发生冲突或替换其文件. epel安装对应的rpm包 centos5 32位epel源下载地址: www.li ...
- 编译安装常用包+阿里镜像源-常用资源-系统-下载-科莱软件下载-docker仓库包-安全圈-杏雨梨云-图形界面安装-docker私有双仓库-阿里源报错处理-centos7目录大小
yum install apr-util apr-util-devel apr apr-devel pcre pcre-devel zlib zlib-devel openssl openssl-de ...
- Yum编译安装Error Downloading Packages报错
1:执行yum clean all 清除缓存目录下的软件包及旧的headers: 2:接着执行 yum list重新列出所有已经安装和可以安装的软件包: 3:重新执行上述命令,发现yum编译成功: 注 ...
- yum install php-gd 安装php gd库报错Error: php56w-common conflicts with php-common-5.3.3-48.el6_8.x86_64 大
yum install php-gd安装php gd库报错Error: php56w-common conflicts with php-common-5.3.3-48.el6_8.x86_64大概的 ...
- Linux Redhat 安装免费yum源
Linux Redhat 安装免费yum源 出处地址:http://www.cnblogs.com/nbartchen/p/8565816.html 1.查看是否安装相关包 rpm -qa|grep ...
- Linux 安装扩展yum源
Linux 安装扩展yum源 下载rpm扩展:http://rpmfind.net/linux/epel/6/x86_64/epel-release-6-8.noarch.rpm CentOS/RHE ...
- centos8安装php扩展memcached报错
在php扩展memcached中执行./configure --with-php-config=/usr/local/php/bin/php-config 报错: error: memcached s ...
- phpize命令在安装AMQP插件是报错phpize:Cannot find autoconf. Please check your autoconf installation and the $PHP_AUTOCONF envir的解决方法
phpize命令在安装AMQP插件是报错phpize:Cannot find autoconf. Please check your autoconf installation and the $PH ...
- 在centos6.7通过源码安装python3.6.7报错“zipimport.ZipImportError: can't decompress data; zlib not available”
在centos6.7通过源码安装python3.6.7报错: zipimport.ZipImportError: can't decompress data; zlib not available 从 ...
随机推荐
- css——外部样式
外部样式 先建立一个css文件,如下: 然后开始写代码,不要加<style> 然后可以在html文件中的<head>内引用:<link rel="stylesh ...
- faker smtp server
import os import asyncio import logging import base64 from email import message_from_bytes from emai ...
- postgressql sql查询拼接多个字段为一个字段查询出来
表年份 月份 数据1 数据22000 1 1 12000 2 2 12001 2 2 2 2001 5 5 4 希望的查询结果如下所示: 时间 数据1 数据22000年1月 1 12000年2月 2 ...
- 通过页面预加载(preload)提升小程序的响应速度
GitHub: https://github.com/WozHuang/mp-extend 主要目标 如果小程序在打开新页面时需要通过网络请求从接口中获取所用的数据,在请求完成之前页面都会因为没有数据 ...
- 每日Linux命令--不完整命令
配置文件优化,即把默认的空行还有#注释行去掉,优化前先拷贝一份配置文件 egrep -v '^$|#' 拷贝的配置文件 > 原配置文件 mysql如何修改root用户的密码 方法1: 用SET ...
- jquery @keyframes 动态添加
需要写一个css3的动画效果,且需要按着写的事件同事进行需控制样式 css代码 @keyframes spin1 { 0% { transform: rotate(225deg); } 50% { t ...
- 新手须知 QT类大全
QT类大全,在行内容中罗列出来了,希望大家多看看,如果是API就更好了,但可惜不是.这些是一些大类,请多做参考. QApplication 应用程序类 QLabel 标签类 QPushButton 按 ...
- django-9-请求与响应
写在表单下面{% csrf_token %} <<<文件上传>>>settings.py UPLOAD_ROOT = os.paht.join(BASE_DIR, ...
- thinkphp 同一字段不同查询条件实现
搞定了 另外区间查询还可以支持更多的条件,只要是针对一个字段的条件都可以写到一起,例如:$map['name'] = array(array('like','%a%'), array('like',' ...
- 【codeforces 810A】Straight «A»
[题目链接]:http://codeforces.com/contest/810/problem/A [题意] 有n门课的成绩,和一个整数k代表每门课的满分都是k分; 然后这n门课的成绩是按照平均分算 ...