maven setting仓库镜像
国内连接maven官方的仓库更新依赖库,网速一般很慢,收集一些国内快速的maven仓库镜像以备用。
最新更新:2016年11月11日 18:05:40 阿里云提供Maven私服,我把配置文件贴一下,自己放在maven的conf下就行,setting.xml
https://github.com/ae6623/Zebra/blob/master/maven-repo-settings-ali.xml

<?xml version="1.0" encoding="UTF-8"?> <!--
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements. See the NOTICE file
distributed with this work for additional information
regarding copyright ownership. The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an
"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied. See the License for the
specific language governing permissions and limitations
under the License.
--> <!--
| This is the configuration file for Maven. It can be specified at two levels:
|
| 1. User Level. This settings.xml file provides configuration for a single user,
| and is normally provided in ${user.home}/.m2/settings.xml.
|
| NOTE: This location can be overridden with the CLI option:
|
| -s /path/to/user/settings.xml
|
| 2. Global Level. This settings.xml file provides configuration for all Maven
| users on a machine (assuming they're all using the same Maven
| installation). It's normally provided in
| ${maven.home}/conf/settings.xml.
|
| NOTE: This location can be overridden with the CLI option:
|
| -gs /path/to/global/settings.xml
|
| The sections in this sample file are intended to give you a running start at
| getting the most out of your Maven installation. Where appropriate, the default
| values (values used when the setting is not specified) are provided.
|
|-->
<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">
<!-- localRepository
| The path to the local repository maven will use to store artifacts.
|
| Default: ${user.home}/.m2/repository
<localRepository>/path/to/local/repo</localRepository>
-->
<localRepository>D:\Repositories\Maven</localRepository> <!-- interactiveMode
| This will determine whether maven prompts you when it needs input. If set to false,
| maven will use a sensible default value, perhaps based on some other setting, for
| the parameter in question.
|
| Default: true
<interactiveMode>true</interactiveMode>
--> <!-- offline
| Determines whether maven should attempt to connect to the network when executing a build.
| This will have an effect on artifact downloads, artifact deployment, and others.
|
| Default: false
<offline>false</offline>
--> <!-- pluginGroups
| This is a list of additional group identifiers that will be searched when resolving plugins by their prefix, i.e.
| when invoking a command line like "mvn prefix:goal". Maven will automatically add the group identifiers
| "org.apache.maven.plugins" and "org.codehaus.mojo" if these are not already contained in the list.
|-->
<pluginGroups>
<!-- pluginGroup
| Specifies a further group identifier to use for plugin lookup.
<pluginGroup>com.your.plugins</pluginGroup>
-->
<pluginGroup>org.mortbay.jetty</pluginGroup>
</pluginGroups> <!-- proxies
| This is a list of proxies which can be used on this machine to connect to the network.
| Unless otherwise specified (by system property or command-line switch), the first proxy
| specification in this list marked as active will be used.
|-->
<proxies>
<!-- proxy
| Specification for one proxy, to be used in connecting to the network.
|
<proxy>
<id>optional</id>
<active>true</active>
<protocol>http</protocol>
<username>proxyuser</username>
<password>proxypass</password>
<host>proxy.host.net</host>
<port>80</port>
<nonProxyHosts>local.net|some.host.com</nonProxyHosts>
</proxy>
-->
</proxies> <!-- servers
| This is a list of authentication profiles, keyed by the server-id used within the system.
| Authentication profiles can be used whenever maven must make a connection to a remote server.
|-->
<servers>
<!-- server
| Specifies the authentication information to use when connecting to a particular server, identified by
| a unique name within the system (referred to by the 'id' attribute below).
|
| NOTE: You should either specify username/password OR privateKey/passphrase, since these pairings are
| used together.
|
<server>
<id>deploymentRepo</id>
<username>repouser</username>
<password>repopwd</password>
</server>
--> <!-- Another sample, using keys to authenticate.
<server>
<id>siteServer</id>
<privateKey>/path/to/private/key</privateKey>
<passphrase>optional; leave empty if not used.</passphrase>
</server>
-->
<server>
<id>releases</id>
<username>ali</username>
<password>ali</password>
</server>
<server>
<id>Snapshots</id>
<username>ali</username>
<password>ali</password>
</server>
</servers> <!-- mirrors
| This is a list of mirrors to be used in downloading artifacts from remote repositories.
|
| It works like this: a POM may declare a repository to use in resolving certain artifacts.
| However, this repository may have problems with heavy traffic at times, so people have mirrored
| it to several places.
|
| That repository definition will have a unique id, so we can create a mirror reference for that
| repository, to be used as an alternate download site. The mirror site will be the preferred
| server for that repository.
|-->
<mirrors>
<!-- mirror
| Specifies a repository mirror site to use instead of a given repository. The repository that
| this mirror serves has an ID that matches the mirrorOf element of this mirror. IDs are used
| for inheritance and direct lookup purposes, and must be unique across the set of mirrors.
|
<mirror>
<id>mirrorId</id>
<mirrorOf>repositoryId</mirrorOf>
<name>Human Readable Name for this Mirror.</name>
<url>http://my.repository.com/repo/path</url>
</mirror>
-->
<mirror>
<!--This sends everything else to /public -->
<id>nexus</id>
<mirrorOf>*</mirrorOf>
<url>http://maven.aliyun.com/nexus/content/groups/public/</url>
</mirror>
<mirror>
<!--This is used to direct the public snapshots repo in the
profile below over to a different nexus group -->
<id>nexus-public-snapshots</id>
<mirrorOf>public-snapshots</mirrorOf>
<url>http://maven.aliyun.com/nexus/content/repositories/snapshots/</url>
</mirror>
</mirrors> <!-- profiles
| This is a list of profiles which can be activated in a variety of ways, and which can modify
| the build process. Profiles provided in the settings.xml are intended to provide local machine-
| specific paths and repository locations which allow the build to work in the local environment.
|
| For example, if you have an integration testing plugin - like cactus - that needs to know where
| your Tomcat instance is installed, you can provide a variable here such that the variable is
| dereferenced during the build process to configure the cactus plugin.
|
| As noted above, profiles can be activated in a variety of ways. One way - the activeProfiles
| section of this document (settings.xml) - will be discussed later. Another way essentially
| relies on the detection of a system property, either matching a particular value for the property,
| or merely testing its existence. Profiles can also be activated by JDK version prefix, where a
| value of '1.4' might activate a profile when the build is executed on a JDK version of '1.4.2_07'.
| Finally, the list of active profiles can be specified directly from the command line.
|
| NOTE: For profiles defined in the settings.xml, you are restricted to specifying only artifact
| repositories, plugin repositories, and free-form properties to be used as configuration
| variables for plugins in the POM.
|
|-->
<profiles>
<profile>
<id>development</id>
<repositories>
<repository>
<id>central</id>
<url>http://central</url>
<releases><enabled>true</enabled><updatePolicy>always</updatePolicy></releases>
<snapshots><enabled>true</enabled><updatePolicy>always</updatePolicy></snapshots>
</repository>
</repositories>
<pluginRepositories>
<pluginRepository>
<id>central</id>
<url>http://central</url>
<releases><enabled>true</enabled><updatePolicy>always</updatePolicy></releases>
<snapshots><enabled>true</enabled><updatePolicy>always</updatePolicy></snapshots>
</pluginRepository>
</pluginRepositories>
</profile>
<profile>
<!--this profile will allow snapshots to be searched when activated-->
<id>public-snapshots</id>
<repositories>
<repository>
<id>public-snapshots</id>
<url>http://public-snapshots</url>
<releases><enabled>false</enabled></releases>
<snapshots><enabled>true</enabled><updatePolicy>always</updatePolicy></snapshots>
</repository>
</repositories>
<pluginRepositories>
<pluginRepository>
<id>public-snapshots</id>
<url>http://public-snapshots</url>
<releases><enabled>false</enabled></releases>
<snapshots><enabled>true</enabled><updatePolicy>always</updatePolicy></snapshots>
</pluginRepository>
</pluginRepositories>
</profile>
</profiles> <activeProfiles>
<activeProfile>development</activeProfile>
<activeProfile>public-snapshots</activeProfile>
</activeProfiles>
</settings>

收集的仓库如下:

#收集的比较快的maven仓库
http://maven.wso2.org/nexus/content/groups/public/
http://jcenter.bintray.com/
http://maven.antelink.com/content/repositories/central/
http://nexus.openkoala.org/nexus/content/groups/Koala-release/
http://maven.tmatesoft.com/content/groups/public/
http://mavensync.zkoss.org/maven2/
http://maven.springframework.org/release/


<mirror>
<id>UK</id>
<name>UK Central</name>
<url>http://uk.maven.org/maven2</url>
<mirrorOf>central</mirrorOf>
</mirror> <mirror>
<id>sonatype</id>
<name>sonatype Central</name>
<url>http://repository.sonatype.org/content/groups/public/</url>
<mirrorOf>central</mirrorOf>
</mirror> <mirror>
<id>jboss-public-repository-group</id>
<name>JBoss Public Repository Group</name>
<url>http://repository.jboss.org/nexus/content/groups/public</url>
<mirrorOf>central</mirrorOf>
</mirror>
maven setting仓库镜像的更多相关文章
- Maven setting配置镜像仓库
国内Maven镜像仓库值得收藏 1.配置IDE构建的Maven存放目录(解压目录) 2.配置IDE的User setting file路径,修改setting配置文件 配置本地仓库 <!-- ...
- IDEA 环境下更改Maven的仓库镜像提高下载速度
Maven把所有常用的jar包存放在一个集中的仓库(repository)中,项目需要什么jar包和他相关的依赖,只要在pom.xml文件中声明就可了,还是很方便的.repository分两种,一个是 ...
- 国内下载比较快的Maven仓库镜像
#收集的比较快的maven仓库 http://maven.wso2.org/nexus/content/groups/public/ http://jcenter.bintray.com/http:/ ...
- 国内阿里Maven仓库镜像及自己收集镜像库
国内阿里Maven仓库镜像Maven配置文件Maven仓库速度快 国内连接maven官方的仓库更新依赖库,网速一般很慢,收集一些国内快速的maven仓库镜像以备用. 最新更新:2016年11月11 ...
- 国内阿里maven仓库镜像maven配置文件maven仓库速度快
国内连接maven官方的仓库更新依赖库,网速一般很慢,收集一些国内快速的maven仓库镜像以备用. 最新更新:2016年11月11日 18:05:40 阿里云提供Maven私服,我把配置文件贴一下,自 ...
- maven配置多仓库镜像(转)
原文地址:maven配置多仓库镜像 问题场景: 1.国内访问maven默认远程中央镜像特别慢 2.用阿里的镜像替代远程中央镜像 3.大部分jar包都可以在阿里镜像中找到,部分jar包在阿里镜像中没有, ...
- maven 远程仓库、私服及镜像配置
maven仓库分类 本地仓库.远程仓库.远程仓库又有私服.中央仓库.其它公共库.中央仓库是maven自带的核心仓库. 仓库配置远程仓库可以配置多个,超级pom中定义的中央仓库 <reposito ...
- [转]国内阿里Maven仓库镜像Maven配置文件Maven仓库速度快
原文地址:http://www.cnblogs.com/ae6623/p/4416256.html 国内连接maven官方的仓库更新依赖库,网速一般很慢,收集一些国内快速的maven仓库镜像以备用. ...
- Maven学习之 仓库镜像
使用仓库镜像 仓库可以声明在项目中,但有时,你可能想要使用某个仓库的镜像,而不去修改项目文件. 使用镜像的原因: 有一个同步镜像,且速度更快. 想使用你自己控制的内部仓库. 想运行repository ...
随机推荐
- 安装Centos 7操作系统
一.安装前准备 VMware workstation.CentOS-7-x86_64 系统镜像. 二.开始新建虚拟机 选择典型-下一步 选择稍后安装操作系统-下一步 选择LINUX-CentOS ...
- TouchDelegate
TouchDelegate(Rect bounds, View delegateView) Parameters: bounds Bounds in local coordinates of the ...
- openPOWERLINK代码在vs2008下编译
以openPOWERLINK_V1.08为例: 1.在主目录下新建Build目录 2.使用cmake-gui对代码进行配置 3.配置完成后生成工程文件xxx.sln 4.使用vs2008打开上述文件, ...
- linux安装tree命令
安装 yum install -y tree 使用,比如显示/root的2层树结构 tree -L 2 /root 效果 /root ├── \033 ├── code │ └── hellowo ...
- 快速入门Python中文件读写IO是如何来操作外部数据的?
读写文件是最常见的IO操作.Python内置了读写文件的函数,用法和C是兼容的. 读写文件前,我们先必须了解一下,在磁盘上读写文件的功能都是由操作系统提供的,现代操作系统不允许普通的程序直接操作磁盘, ...
- PAT 天梯赛 L1-016. 查验身份证 【水】
题目链接 https://www.patest.cn/contests/gplt/L1-016 AC代码 #include <iostream> #include <cstdio&g ...
- cdoj1325卿学姐与基本法
地址:http://acm.uestc.edu.cn/#/problem/show/1325 题目: 卿学姐与基本法 Time Limit: 2000/1000MS (Java/Others) ...
- c语言URL通过Http下载mp3 格式
通过http协议下载MP3的关键就是 整块打包,一块一块向文件里面存储.读取的时候用二进制 /***szWebAddr: 页面地址(包含host+addr) szMp3FileName:将要存储文件的 ...
- 自定义Checkbox和Radiobox
在线演示 本地下载
- os包方法
os包中实现了平台无关的接口,设计向Unix风格,但是错误处理是go风格,当os包使用时,如果失败之后返回错误类型而不是错误数量. os包中函数设计方式和Unix类似,下面来看一下. func Chd ...